Diesel Particle Filter Equipment In Europe
-
Manufactured by PURitech Gmbhbased in GERMANY
The DAS-DBS system is a combined regeneration filter system, comprising an active regeneration component (external fuel injection) and a passive component (catalytic filter coating or fuel borne catalyst). The filter system is designed for vehicles and machines operating often on a severe duty cycle (low exhaust gas temp.). It is ...
-
Manufactured by PURitech Gmbhbased in GERMANY
The DPFN+NC system is a self-cleaning wall-flow filter system utilising our exclusively developed passive regeneration technology. The 'self-regeneration' occurs through a patented catalytic coating of the pre-filter allowing us to take full benefit of a non-coated wall flow filter monolith. This innovation ensures the lowest cost ...
-
Manufactured by StrojÃrna Novotný s.r.obased in CZECH REPUBLIC
Engine: Hatz diesel engine. Diesel particle filter (Stage V). Power 59 HP. El. Engine monitoring. Traction drive: hydrostatic stepless with integrated parking brake. two driven wheels. Chain 300mm (hydraulic tighten). ...
-
Manufactured by CPK Automotive GmbH & Co KGbased in GERMANY
The DYNTEST-Module CatFire® is an active regeneration system for DOC-type diesel particle filters in conjunction with the highly reliable DYNTEST bus system. There's no escaping active regeneration systems if the temperature of the exhaust gases a vehicle produces are not sufficiently high - as is often the case with buses, ...
-
Manufactured by MAN Truck & Bus AGbased in GERMANY
IAA 2016 innovations: The tried-and-tested engine design of the MAN TGM for building site and heavy-duty application is being updated. The new engine software, coolant and oil-level sensors as well as the sensor-controlled fan speed regulator make the MAN D08 engine even more reliable. The six-cylinder version with 340 HP also features an improved intercooler. It significantly reduces the thermal ...
-
Manufactured by Terexbased in USA
The TWH 215 waste handler is a compact, maneuverable and powerful solution for those in search of waste handling equipment that does not compromise performance, efficiency or reliability. The TWH 215 has a reach of 8.8 meters and an operating weight of 15 tonnes (16 US ...
-
Manufactured by EHC Teknik ABbased in SWEDEN
With EHC P15 diesel particulate filters (DPF) fitted to cars it is possible to reduce diesel soot emissions by 99%. This is especially important when diesel engines are used in confined spaces. With EHC diesel particulate filter cars, vans, etc can create a healthy work environment and live up ...
-
Manufactured by EHC Teknik ABbased in SWEDEN
We provide diesel particulate filters (DPF) for numerous construction machines. If you would like to retrofit machines, that is also possible. As machines in construction have a wide range of requirements, we have taken this into consideration when creating our diesel particulate ...
-
Manufactured by PURitech Gmbhbased in GERMANY
This affordable system utilizes permanent and passive filter regeneration with fuel born additive. The installation works as a replacement for all common ...
-
Manufactured by Weidemann GmbHbased in GERMANY
The compact Weidemann telehandler T4512 offers a unique combination of lifting height, width and machine capacity: A lifting height of 4.5 m enables you to carry out a whole range of stacking and loading tasks. It also makes light work of getting over most high-sided constructions. With a substantial payload of 1.25 tonnes, any type of large bale or weight of material poses no problem. The ...
-
Manufactured by CDTi Advanced Materials Incbased in USA
Catalysts are a key part of many emission control systems; Fuel Borne Catalysts are fuel additives containing minute amounts of organo-metallic catalysts. We have developed a range of Fuel Borne Catalyst (FBC) products, with many of these based on our Platinum Plus® technology, to reduce harmful emissions, reduce operating costs and increase the performance of emission control ...
-
based in GERMANY
The GRIMM 5430 is a high accuracy stationary particle counter for automotive emission measurements with improved response time (t10-t90 < 3 s) and an aerosol flow rate of 0.6 L/min. The instrument complies to the GPRE particle measurement program (PMP) for Euro 5 and 6 regulation 83. The new detection head enables single particle counting ...
-
Manufactured by J Willibald GmbHbased in GERMANY
The reliable EP Shark range has adjusted well to the market requirements through the close cooperation of our research and development team and our customers. The new improved and stronger construction in connection with MAN engine power of the actual generation stands increased force and efficient fuel consumption. Our operators are praising the efficiency and easy service accessibility as well ...
-
Manufactured by Gericke AGbased in SWITZERLAND
Proven design with thousands of running applications. Gericke feeders are designed for the accurate dosing of various bulk materials. The throughput ranges from 0.2 to 77,000 ...
-
Manufactured by NGK Spark Plug Europe Gmbhbased in GERMANY
Exhaust Gas Temperature Sensors (EGTS) monitor the temperature of the exhaust gas, ensuring that exhaust gas cleaning components achieve optimal conversion rates. NGK SPARK PLUG has been developing EGTS for OE and the Aftermarket for many ...
-
Manufactured by PURitech Gmbhbased in GERMANY
PURItech has an effective emission control solution for virtually every diesel engine. For the most demanding situations, PURItech has developed the PURImax system. PURImax reduces emissions of gaseous pollutants (CO: -96%, HC -92%, NOx; -30%) purely by using a catalytic coating without the addition of a reducing agent or substance. ...
-
Manufactured by Gericke AGbased in SWITZERLAND
The gravimetric feeding method involves either weighing a requested quantity as a batch or feeding a constant mass flow over time. The choice depends on the process that can be made continuously or in batch mode. Gericke Loss-in-Weight Feeders generate a controlled, absolutely constant mass flow, as required in mixing processes or extruder infeed. Robust, reliable and durable construction was the ...
-
Manufactured by Pegasor Oy (Ltd)based in FINLAND
PPS-M is your optimal tool for industrial fine particle monitoring in various environments: Engine and aftertreatment development. Testing labs and portable emission monitoring devices. Stack emission monitoring. Outdoor and indoor air quality ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you