Dioxin Equipment In Africa
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Automatic Dioxin Sampling System GT90 Dioxin+ is a future-proof solution for a long-term sampling of dioxin emissions in conformity to the European standards EN1948-1 and EN15267. The system represents the cutting-edge technology for dioxin sampling and fulfills all the requirements of the dioxin measurement ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous dioxin and furan emission monitoring by long-term sampling. TÜV and MCERTs certified, ETV EPA approved. The AMESA-D utilizes the water cooled probe method with Isokinetic sampling system coupled with XAD-II adsorbent cartridge for Long-term sampling of dioxins (PCDD), furans (PCDF) and other persistent organic contaminant ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
L × I.D. 60 m × 0.32 mm, df 0.20 μm Application: A highly polar cyanosiloxane column specially tested for analyses of dioxins, specifically tetrachlorodibenzodioxin (TCDD) isomers. Because the phase is stabilized, it has a maximum temperature slightly higher than non-bonded cyanosiloxane columns USP Code: none ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
L × I.D. 30 m × 0.25 mm, df 0.20 μm (Supelco) Application: A highly polar cyanosiloxane column specially tested for analyses of dioxins, specifically tetrachlorodibenzodioxin (TCDD) isomers. Because the phase is stabilized, it has a maximum temperature slightly higher than non-bonded cyanosiloxane columns USP Code: none ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
L × I.D. 60 m × 0.25 mm, df 0.20 μm Application: A highly polar cyanosiloxane column specially tested for analyses of dioxins, specifically tetrachlorodibenzodioxin (TCDD) isomers. Because the phase is stabilized, it has a maximum temperature slightly higher than non-bonded cyanosiloxane columns USP Code: none ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was designed to capture all the gases, soot and entrained solids emitted by the incinerator while burning a low plastic content RDF mix and process it to meet the European regulations, which are set out in directive 2000/76/EC, dated 4th Dec 2000. Suitable for most small scale industrial ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This is one of the largest PCS systems we have developed. Capable of handling in excess of 1000kg per hour (FLOW RATE INSTEAD???), this unit features a large filter array and additional heat exchanger to reduce gas temperatures to the required levels for ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was built to capture and clean the gases generated from burning a mixture of medical waste (primarily soiled bandages). Suitable solution for most most medical processes (dependent on waste stream and ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
For a less demanding, lower throughput gas cleaning system, the venturi scrubber is a well tested and respected design used by many industrial processes. It uses a combination of vortex technology and high pressure water misting to remove harmful elements from the exhaust ...
-
Manufactured by Henan Doing Machinery Equipment Co., Ltd.based in CHINA
for automatic and continuous feeding; 2) Preheating to remove Dioxin As we all know that Dioxin is very easy to be produced from many kinds of waste burning process, especially chlorine substance, like PVC plastics, paper-mill waste, household garbage, etc. 3) Pyrolysis After remove the Dioxin, the input materials will go to the ...
-
Manufactured by Addfield Environmental Systems Limitedbased in UNITED KINGDOM
Powdered Activated Carbon (PAC) injection is widely used method to control heavy metals and dioxins emissions. The porous structure of carbon makes it an ideal solution for absorption and it can be injected directly into the flue gas stream or laid in beds for the flue gas to pass through. The injection temperatures, feed rate, material ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
; this also allows it to be easy to move it with just two fingers. Built in accordance with the main international methods such as: EN UNI 16911 velocity and flowrate in ducts, EN ISO 13284-1 particulate matter in low concentrations, EN ISO 1948-1 Dioxins/Furans and PCB, EN UNI 13211 Total Mercury, EN 14385 Heavy Metals and US EPA Method 1-2-5. ...
-
based in AUSTRIA
For high cleaning efficiency, the RecuKAT's attractive economic performance is due to the low reaction temperature of the CTP catalysts. CTP can refer to more than 30 years of experience with catalysts in industrial applications. The RecuKAT is suitable for small to medium gas flows with low or high ...
-
Manufactured by Bioplastics Internationalbased in USA
The decomposition process of petroleum plastics in landfills emits methane gas into our atmosphere for approximately one thousand years. Methane gas is four times more toxic than what comes out of the exhaust pipe of an automobile. Once in our atmosphere methane gas oxidizes to carbon dioxide gas. Carbon dioxide gas has a half life of seven years, which means it will remain for many years ...
-
Manufactured by Addfield Environmental Systems Limitedbased in UNITED KINGDOM
The ceramic filter consists of a series of pollution control systems for specifically dealing with the off gas from an incinerator. Typically installed on a high capacity incinerator plant this pollution control system will capture all the gases, soot and entrained solids emitted to meet the European regulations, which are set out in directive 2000/76/EC. Such a filtration system typically has a ...
-
Manufactured by Saubatech (Pty) Limitedbased in SOUTH AFRICA
Multiple industrial processes produce emissions, containing products which are hazardous to people’s health, or pollute the environment. Most countries have instituted regulations that limit these emissions, requiring these gasses to be ...
-
Manufactured by Dürr Systems, Inc.based in USA
Sorpt.X SQ cross-flow packed bed filter systems are based on the sorptive process and are especially suitable for purifying hot exhaust gas flows. The adsorbent used is a bulk material. This is generally limestone, which is an inexpensive but highly effective adsorbent for Air Pollution ...
-
Manufactured by Addfield Environmental Systems Limitedbased in UNITED KINGDOM
The Addfield wet scrubber system is primarily designed as particle suppressant system, ideally suited to high capacity incineration machines. Heavy particulates are removed from the exhaust gas using water injected from the roof of the scrubber system. This bolt on system can be added to any incineration machine in the Addfield range and is scaled according to the specific application. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you