Only show results available in Virginia? Ok

Dioxin Emissions equipment

  • Premium

    Environnement S.A. - ENVEA - Model AMESA - Continuous Dioxin/Furan Emission Monitoring System by Long-Term Sampling

    The only long-term sampling system for dioxins with TÜV, MCERT and ETV EPA approvals.

  • Premium

    AMESA - Long Term Dioxin and Furan Sampling System

    Continuous dioxin/furan emission monitoring by long-term sampling. The only long-term sampling system for dioxins with TÜV, MCERT and ETV EPA approvals.

    By Norditech Pty Ltd based in Arndell Park, AUSTRALIA. from Emission Monitoring Product line

  • Premium

    Environnement S.A. - ENVEA - Model AMESA - Dioxin Monitoring System

    Traditionally, the monitoring of pcdd/fs is achieved by taking 1–3 short-term samples per year (each of 6 hours). However, over the past 10 years it was discovered that especially during start-up and shut-down periods of (state of the art) incinerators the dioxin emissions in the flue-gas can increase compared to normal operation up to ...

    By Environnement S.A Group - envea based in Poissy, FRANCE. from Dioxin Monitoring Product line

  • Dioxin Monitoring System

    The Dioxin Monitoring System is a device, which has been developed for continuous monitoring of dioxin emissions. The design furter offers versatile application for the sampling of other pollutants, like e.g. PCBs, metals, HCB, etc.

    By Monitoring Systems GmbH based in Pressbaum, AUSTRIA.

  • Ιsokinetic Stack Sampling

    ENCO offers a complete range of off-line sampling equipment for dust and gaseous emissions. They are all instruments operating with standard reference methods (EN, ISO and US EPA methods) and are used for periodic measurements according to the environmental legislation, spot measurements or for calibration of continuous emission analysers  ...

    By ENCO LTD based in Athens, GREECE. from Industrial Emissions Product line

  • GEA Bischoff - Dioxin and Furan Separation

    Polychlorinated dibenzodioxin and dibenzofuran (PCDD/F) occur in very small concentrations in the off gases of several industrial combustion processes in a temperature range of 200 to 400 °C. A typical dimension of the concentration of these substances within the off-gases is 2 to 4 n/gm³ TE*. This organic contamination is extremely ...

    By GEA Bischoff GmbH based in Essen, GERMANY. from Gas Cleaning in Process Industries Product line

  • XDS-CALUX - Model Assay - Rapid, Accurate and Affordable Dioxin/Furan and PCB Analysis

    The XDS-CALUX system is a reporter gene-based screening bioassay for dioxin and related dioxin-like chemicals. It can measure dioxin faster and less expensively than traditional GC/HRMS instrumental methods. Among many other approvals, it is validated as method 4435 by the U.S. EPA to be used for measuring emissions gas, dust, ashes and other ...

    By Xenobiotic Detections Systems, Inc. based in Durham, NORTH CAROLINA (USA).

  • Air Contamination & Emissions Monitoring

    At SAL we have extensive experience in emmissions and ambient air analytics. Typical analyses are: dioxin and furan analysis, polychlorinated biphenyls (pcb), polyaromatic hydrocarbons (pah), heavy metals, particulates, acid gases, combustible gases.

    By Scientific Analysis Laboratories Ltd based in Manchester, UNITED KINGDOM.

  • Genius5 - Model 5 PCDD - Isokinetic sampling of POP´s

    The Genius 5 PCDD samples dioxin emissions and other pollutants from 1 to 8 hours, fulfilling all the requirements of the dioxin measurement standard EN 1948-1, released 2006. Intuitive sampling pages guide the user to have reliable, representative and accurate sampling. Report is stored on USB memory stick.

    By Genius5-Instruments GmbH based in Kottingbrunn, AUSTRIA.

  • GORE REMEDIA - Catalytic Filtration Systems

    W. L. Gore & Associates, Inc., the worldwide leader in filtration technologies, is proud to offer the most cost-effective way to meet dioxin and furan emission regulations. A simple replacement of your existing filters allows you to destroy dioxins and furans right in your baghouse. This award winning system, proven in over 30 applications ...

    By W. L. Gore & Associates based in Newark, DELAWARE (USA). from Filtration Product line

  • Lodge Cottrell - Fabric Filters

    Lodge Cottrell supply fabric filters to a wide variety of industries and have done so for several decades. Our fabric filters are designed in-house to meet the most stringent emission regulations covering particulate, SO2, heavy metals and dioxin levels.

    By Lodge Cottrell Ltd based in Halesowen, UNITED KINGDOM.

  • Local Environmental Impacts

    Atmospheric Pollutants: In addition to dust and noise, the emission of airborne pollutants is a major challenge in our cement business. While dust and noise are produced at many stages in the production process, airborne pollutants such as carbon monoxide, sulfuric oxide, heavy metals, dioxin, and furan are produced only during pyroprocessing. The ...

    By HeidelbergCement based in Heidelberg, GERMANY. from Environment Product line

  • Flue Gas Treatment Systems

    Typically flue gas treatment systems are required when particulates and other gaseous pollutants are required to be removed from exhausts.Such pollutants include acid gases (such as SO2, HCl, etc.), heavy metals (such as mercury) and dioxins. Typically such pollutants are created by the conversion of waste or biomass into energy.

    By Lodge Cottrell Ltd based in Halesowen, UNITED KINGDOM.

  • Powdered Activated Carbon

    Powdered Activated Carbon (PAC) injection is widely used method to control heavy metals and dioxins emissions. The porous structure of carbon makes it an ideal solution for absorption and it can be injected directly into the flue gas stream or laid in beds for the flue gas to pass through. The injection temperatures, feed rate, material porosity ...

    By Addfield Environmental Systems Ltd. based in Burntwood, UNITED KINGDOM. from Filtration Product line

  • DARCO - Model FGD - Powdered Activated Carbon

    DARCO FGD is a steam activated carbon manufactured specifically for the removal of heavy metals and other contaminants typically found in incinerator flue gas emission streams. It has been proven in numerous full scale operating facilities to be highly effective for the removal of gaseous mercury, dioxins (PCDD) and furans (PCDF). Its open pore ...

    By J Carpenter Environmental LLC (JCE) based in Mequon, MICHIGAN (USA). from Air Pollution Control Products & Equipment Product line

  • Westech - Model MST - Manual Stack Sampling Train

    Westech Scientific Instruments (Westech) provides a complete range of Manual Stack Trains for isokinetic and gas sampling of emissions to determine all major emitted pollutants. The standard equipment is modified to meet all current European legislation and requirements and will still comply with existing USEPA methods. A complete range of ...

    By Westech Scientific Instruments (Westech) based in Upper Stondon, UNITED KINGDOM. from Environmental Instruments Product line

  • Flue Gas Treatment systems

    Typically flue gas treatment systems are required when particulates and other gaseous pollutants are required to be removed from exhausts. Such pollutants include acid gases (such as SO2, HCl, etc.), heavy metals (such as mercury) and dioxins. Typically such pollutants are created by the conversion of waste or biomass into energy. Under such cir

    By Lodge Cottrell Ltd based in Halesowen, UNITED KINGDOM.

  • Cleeve - Carbon / Lime Injection System

    The problem of controlling acid gases and the removal of gaseous heavy metals and dioxins from emissions are typical in flue gas cleaning. The problem is overcome with introduction of Powder Activated Carbon (PAC) and Hydrated Lime into the system. Benefiting from over 40 years experience in the industry, Cleeve relies on expertise in the storage ...

    By Cleeve Materials Handling Limited based in Gloucestershire, UNITED KINGDOM.

  • Tenmat Firefly - Hot Gas Filters

    Tenmat Firefly Hot Gas Filters are designed to remove particles, acids, heavy metals and dioxins from the flue gases at temperatures higher than those achievable with any conventional system. The filter elements are manufactured from unique refractory materials and inorganic bonds, enabling them to be used at temperatures in excess of 1,000°C. ...

    By Tenmat ltd based in Manchester, UNITED KINGDOM.

  • Clean Air Technology: Wet Gas Cleaning

    According to the local emission regulations particles or gaseous pollutants have to be removed from the flue gas.

    By Michaelis GmbH & Co. KG based in Veitshöchheim, GERMANY. from Clean Air Technology Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you