Direct Fired Thermal Oxidizer Equipment Available In Prince Edward Island
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Direct Fired Thermal Oxidizer (DFTO) thermally destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions often discharged from industrial exhaust stacks or chemical processes. It is an ideal abatement technology for process streams heavily laden with pollutants ...
-
Manufactured by TKS Control Systems, Inc.based in USA
The TKS Direct Fired Thermal Oxidizers are often used when High VOC Concentrations exist in a given waste ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's FIRECAT Thermal Oxidizers are simplest combustion devices that uses natural draft or forced draft burners and designed to maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98-99.99%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to ...
-
Manufactured by NESTEC, Inc.based in USA
For manufacturers that produce high-VOC emissions, it can be difficult to find the right thermal oxidation system to ensure compliance with the regulations of the EPA or other governing bodies. Many thermal oxidation solutions aren’t equipped to handle high concentrations of VOCs and HAPs over long periods of time and may ...
-
Manufactured by Process Combustion Corporation (PCC)based in USA
The simplest type of thermal oxidizer, it does not include any type of heat recovery system to recover a portion of the waste heat generated by the combustion ...
-
Manufactured by Air-Clear LLCbased in USA
Thermal Oxidizers can be applied to a wide variety of processes. They are often the technology of choice because of durability and adaptability over a wide range of operating conditions. Today’s Air Pollution Control applications require the world’s most advanced thermal oxidizer systems to destroy hazardous air ...
-
Manufactured by Nacah Tech LLCbased in USA
Nacah Tech provides the process design, mechanical design, BMS (control system) design, material procurement and fabrication, installation supervision and commissioning of Thermal Oxidizer Systems with many available accessories such as LEL analyzer, flow meters, controls, waste heat recovery, preheaters, flame arrestor, id fan, and stack. ...
-
Manufactured by Turner EnviroLogic, Inc.based in USA
Turner EnviroLogic designs and manufactures direct fired thermal VOC oxidizers for applications with high VOC concentrations where the level of VOC's themselves can support combustion without the use of fuel. Such applications include pipeline venting, tank venting, solvent cleaning station venting and chemical sterilization ...
-
Manufactured by Nacah Tech LLCbased in USA
Recuperative thermal oxidizers best suit VOC laden air streams with sufficient loading that provides more heat than for sound RTO’s operation but insufficient normal loading for DFTO (direct fired thermal oxidizer). Recups reduce the operating costs to an optimum level while not overheating ...
-
Manufactured by Process Combustion Corporation (PCC)based in USA
This system is a direct fired thermal oxidizer with heat recovery added at the discharge end of the combustion ...
-
Manufactured by NESTEC, Inc.based in USA
For manufacturers that need to maximize their space, some thermal oxidation systems can be a heavy burden. Depending on the needs of individual businesses, a regenerative thermal oxidizer or direct-fired thermal oxidizer may be a difficult system to integrate due ...
-
Manufactured by Dürr Systems, Inc.based in USA
SCR Air Pollution Control Systems used for the selective catalytic reduction of nitrogen oxides (NOx) in flue gases and process exhaust gases when high nitrogen oxide conversion rates needed. They can be installed in Oxi.X DF (direct-fired thermal oxidizer) systems for flue gas purification or ...
-
Manufactured by Lundberg, LLCbased in USA
The Lundberg dedicated thermal oxidizer systems have been developed over the years for harsh industrial environments. Our designs include direct fired oxidizers, regenerative thermal oxidizers, and regenerative catalytic oxidizers. These systems are designed to ...
-
Manufactured by econ industries services GmbHbased in GERMANY
The econ High Temperature Treatment Unit is a continuous process designed for the treatment of catalysts and activated carbon contaminated with mercury, mercury sulphide (HgS), sulphur, and hydrocarbons. The HTTU uses a direct fired thermal oxidation technology for the high temperature (700 - 1000 °C) destruction of mercury ...
-
Manufactured by Puti Energybased in INDIA
and Direct Thermal Oxidizer we make depending upon clients requirement.If you have a Thermal Oxidizer already and need servicing/refurbish then we will do that with our ...
-
Manufactured by Airprotech - Deurotech Groupbased in ITALY
BACKDIRECT THERMAL OXIDIZERSDirect thermal oxidizers destroy the pollutants through thermal oxidation at high temperature, process gas and/or waste organic liquids are directly injected in the combustion chamber. airprotech delivers direct thermal oxidizers in ...
-
Manufactured by NESTEC, Inc.based in USA
Though new designs and technologies in thermal oxidation have been discovered since the turn of the century, the core process has existed for decades. Regenerative thermal oxidizers (RTOs) have remained popular for many types of manufacturers due to their longevity, simplicity and immense efficiency. RTOs work by drawing in ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
RTOs or Regenerative Thermal Oxidizers are the most energy efficient oxidizer designs. Catalytic Combustion Corporation manufactures RTOs and other thermal oxidizers at the CCC facility in Bloomer, WI. Thermal oxidizers can be direct thermal ...
-
Manufactured by Branch Environmental Corporationsbased in USA
Thermal Oxidation if the VOC is very low in concentration. Branch can help you evaluate the best ...
-
based in AUSTRIA
The perfect CTP-solution for combined cleaning of low laden organic waste gas flows and high caloric off gas and/or liquids even without LEL protection. The Hybrid-RTO is especially suitable for small flows at concentrations > LEL, which occur continuously or discontinuously. Design of the raw gas injection is possible in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you