Dispersant System Equipment Available In Dominica
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita´s broad range of hardness stabilizers and dispersants for open cooling ...
-
Manufactured by Miccra GmbHbased in GERMANY
The economy drive MICCRA D-1 is a small hand-held dispersing and homogenizing device for volumes from 0.1 up to 1500 ml. It was especially developed for volumes treated ind the bio- and gene technology. It’s an economic drive for a small price with a “soft-touch” housing. More powerful and high-speed than comparable ...
-
Manufactured by Cellwood Machinery ABbased in SWEDEN
As the most advanced system the HDS produces the best dispersing results. It is also the most flexible system, with optional features such as in-line bleaching. The key feature of hot dispersing is treatment with high temperature at high pulp consistency. This leads to many advantages: improvement of fiber properties, reduction ...
-
Manufactured by Cellwood Machinery ABbased in SWEDEN
equipment to be used. Retention time is 20-30 seconds at a temperature of up to 95°C (203°F). The system is further described below – with treatment steps for dewatering, heating and ...
-
Manufactured by Statiflo International Ltd.based in UNITED KINGDOM
Custom Designed, Engineered and Built. The Statiflo Gas Dispersion System (GDS) is a new concept for simultaneous mixing and mass ...
-
Manufactured by Ytron Process Technology GmbH & Co. KGbased in GERMANY
YTRON VacuPlant® is a universally applicable system for mixing and dispersion of powders and liquids. Using vacuum to draw in powder, the VacuPlant will disperse, dissolve, deaerate and emulsify with ability to heat and cool as required. Optimised process configuration. We work in partnership with our customers to develop tailor-made ...
-
Manufactured by Entec International BVbased in NETHERLANDS
, it is necessary to constantly innovate in this sector. The unique thing about the ODS system is that it combines two static mixers. For drinking water, waste water and process ...
-
Manufactured by Leachator Pumping Systems, Inc.based in USA
The Leach-Rite system is a unique approach to leachate recirculation. Since we have a lot of experience in pumping systems, when recirculation became a hot topic, we started looking at how it was being done, what the problems were and how me might do it ...
-
Manufactured by Cellwood Machinery ABbased in SWEDEN
The UCD system consists of only three machines: screw press, infeeder/steamheater, and disperser. This solution offers the most compact design possible, something that saves both plant space and investment cost. Retention time is 5–10 seconds at a temperature of up to 110°C (230°F). The system is further described below ...
-
by AMPOLbased in USA
The DSD-3010 Spray System is designed to spray seawater or diluted dispersant chemical. The diesel engine powered pump package utilizes the metered education concept of blending and dispensing dispersant solutions. The system consists of pump unit mounted on aluminum frame. The pump is driven by a 10 H.P. (7.5kW), single ...
-
Manufactured by Megator - Pumps 2000based in USA
Megator oil spill dispersant spray systems are portable light weight sets that can be quickly and easily mounted on tugs, offshore supply vessels and other pollution control craft responding to marine emergency oil spills situations. ...
-
Manufactured by Vikoma International Limitedbased in UNITED KINGDOM
The TC3 system is a dispersant system, which is designed to be slung beneath a helicopter. It consists of a 910 litre (240 gallon) dispersant hopper, pump, spray arms, sling assembly and spreader bar and control module. During operation, the unit can be flown at speeds of up to 85 knots, increasing to 120 knots during transit. ...
-
Manufactured by Potential Engineeringbased in INDIA
Our neat and diluted oil spill dispersant solution effectively removes very thin oil slicks which cannot be recovered by mechanical method. It operates on diesel engine comprising PD pump, dispersant flow meter, recirculation valve, pressure gauge, interconnecting piping and valves, vessel mounted spray arms and nozzles. Dispersant spray ...
-
Manufactured by KEE Process Limitedbased in UNITED KINGDOM
The KEE dispersed air floatation system is specifically designed for physical/chemical pre-treatment of wastewater. The Microfloat removes fats, oil and grease in the pre-treatment process and therefore biological wastewater treatment greatly reduces the load for the downstream biological treatment facilities. Using a low-power ...
-
Manufactured by Newterra, Ltd.based in CANADA
The Aire-O2 Microfloat Dispersed Air Flotation System (DAF) is a water treatment process that clarifies wastewaters by the removal of suspended matter, such as oil or solids. Ideal for industrial applications, our Aire-O2 Microfloat Dispersed Air Flotation System is an effective, affordable, and reliable physical/chemical ...
-
Manufactured by OMI Industries (OMI)based in USA
Throughout the atomization process, Ecosorb odor eliminator is mixed with water, pumped through pipes/hoses and delivered via nozzles or fans to areas affected by odor. After the Ecosorb droplets are dispersed into the air they neutralize odors on contact. The major advantage of atomization nozzle systems is the level of control they ...
-
Manufactured by Vikoma International Limitedbased in UNITED KINGDOM
The Vikospray 1000 unit is designed for use as a portable, lightweight oil dispersant sprayer. The system consists of a diesel engine, a self priming pump, a liquid jet pump and a manifold, all mounted on a skid frame. The system is also supplied with four lances and ...
-
Manufactured by Vikoma International Limitedbased in UNITED KINGDOM
The Vikospray 2000 system is a medium size spray unit designed for use on response vessels and vessels of opportunity. The system comprises of a diesel engine, a self priming main pump and chemical pump, a manifold and two six meter spray arms. The complete system is mounted on a frame but the spray arms can be detached and mounted to the ...
-
Manufactured by Nixalite of America Inc.based in USA
Long range, high power acoustic hailing device is perfect for communications, crowd control, animal and bird dispersal over extremely long distances. The loudest Acoustic Hailing Device in production, HyperSpike 40 is used for the transmission of clear, intelligible messages, commands and alter tones over extremely long distances. HyperSpike ...
-
Manufactured by Nixalite of America Inc.based in USA
Long range, higher frequency acoustic hailing device is perfect for communications, crowd control, animal and bird dispersal. A self-contained, portable and powerful acoustic hailing device used for the transmission of clear, intelligible messages and high frequency alert/warning tones. HyperSpike 24 packs a peak acoustic output of 153 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you