distributed temperature equipment in Spain

  • Polymer Char - Model TREF - Temperature Rising Elution Fractionation

    Temperature Rising Elution Fractionation is the most comprehensive technique for the characterization of the Chemical Composition Distribution (CCD) in Polyolefins and Polymer Char’s TREF is the first fully automated analytical instrument that performs this technique.

    By Polymer Characterization, S.A based in Valencia, SPAIN. from Temperature Rising Elution Fractionation Product line

  • ThermoHook - Thermometer

    This thermometer is a unique tool able to measure the outside and inside temperature of the pipe at the same time. This enables the operator to have exhaustive, individual control of the efficiency of each module, collector and bow, observing possible flaws or any emptiness losses in the receiver pipes as well as inconsistencies in the ...

    By Abengoa Solar based in Sevilla, SPAIN.

  • Manifold - Model MBT-2.3 - 2-Way 3-Valve

    TECVAL MBT-2.3 manifolds are designed to work with fluids under high pressure and/or high temperature service. Their distribution diagram consists of three valves commanding three lines: high pressure, low pressure and a by-pass line to restart the instrument.

    By Tecval based in VACARISSES, SPAIN. from 2-Way 3-Valve Product line

  • Manifold - Model MB-1.2 - 1-Way 2 Valve

    TECVAL MB-1.2 manifolds are designed to work with fluid under high pressure and/or high temperature service. Their distribution diagram consists of two valves commanding the main line, where inlet and outlet are at 180º, and a discharge or testing line outlet at 90º outflow.

    By Tecval based in VACARISSES, SPAIN. from 1-Way 2 Valve Product line

  • TECVAL - Model MBT-2.5 - 2-Way 5-Valve Manifold

    TECVAL MBT-2.5 manifolds are designed to work with fluids under high pressure and/or high temperature service. You can select among three different distribution diagrams where five valves command two pressure lines, a by-pass and two purge lines with 1/4” NPT female outflow.

    By Tecval based in VACARISSES, SPAIN. from 2-Way 5-Valve Manifold Product line

  • Polymer Char - Model CRYSTAF - Fully Automated Instrument

    CRYSTAF is a fully automated instrument intended for the fast measurement of the Chemical Composition Distribution (CCD) in Polyolefins. CRYSTAF instrument performs the Crystallization Analysis Fractionation technique to separate the polymer by its comonomer content. The process is done in a single temperature ramp (crystallization step), while ...

    By Polymer Characterization, S.A based in Valencia, SPAIN. from Fully Automated Instrument Product line

  • TECVAL - Model MBT-2.3DT - 2-Way 3-Valve Transmitter Direct Coupling Manifold

    TECVAL MBT-2.3DT manifolds are designed to work with fluids under high pressure and/or high temperature service. Their distribution diagram consists of three valves commanding three lines: high pressure, low pressure and a by-pass line to restart the instrument. The coupling is manufactured according to DIN 19213. Four screw 7/16” UNF and ...

    By Tecval based in VACARISSES, SPAIN. from 2-Way 3-Valve Transmitter Direct Coupling Manifold Product line

  • TECVAL - Model MBT-2.3DA - 2-Way 3-Valve Transmitter Direct Coupling Manifold

    TECVAL MBT-2.3DA manifolds are designed to work with fluids under high pressure and/or high temperature service. Their distribution diagram consists of three valves commanding three lines: high pressure, low pressure and a by-pass line to restart the instrument. The coupling is manufactured according to DIN 19213. Four screw 7/16” UNF and ...

    By Tecval based in VACARISSES, SPAIN. from 2-Way 3-Valve Transmitter Direct Coupling Manifold Product line

  • TECVAL - Model MB-2.5DT - 2-Way 5-Valve Transmitter Direct Coupling Manifold

    TECVAL MB-2.5DT manifolds are designed to work with fluids under high pressure and/or high temperature service. You can select among three different distribution diagrams where five valves command two pressure lines, a by-pass and two purge lines with 1/4” NPT female outflow. The coupling is manufactured according to DIN 19213. Four screw ...

    By Tecval based in VACARISSES, SPAIN. from 2-Way 5-Valve Transmitter Direct Coupling Manifold Product line

  • Model AL - Water Baths Aqualine

    The LAUDA Aqualine water baths offer an affordable entry into laboratory thermostating. The equipment range for basic applications in the laboratory stands out for its simple operation with digital LED display and high reliability. The devices have no circulating pumps and no fittings within the bath. Consequently, they are corrosion-resistant, ...

    By LAUDA Dr. R. Wobser GmbH & Co. KG Office in Terrassa (Barcelona), SPAIN. from Water Baths Aqualine Product line

  • CPVC Fittings

    Cepex has developed a range of CPVC fittings to complement its valves made in the same material and to increase the possibilities of installations with its products, achieveing with this to increase the temperature range of its installations up to 90ºC. For applications in: water transport: building technology, electronics, shipping engineer, ...

    By Cepex based in polinyá (Barcelona), SPAIN. from CPVC Fittings Product line

  • Dekati - Model HT- ELPI+ - High Temperature ELPI+

    Dekati® High Temperature ELPI®+­ (HT-ELPI®+) is a new version of the Dekati® ELPI®+ that enables real-time measurement of particle size distribution from 6 nm up to 10 µm with 10 Hz sampling rate. The High Temperature ELPI®+ allows direct measurement of up to 180 °C aerosol sample without the need to cool the sample, which makes the HT-ELPI®+ a ...

    By Dekati Ltd. Distributor in Fuente el Saz de Jarama, SPAIN. from High Temperature ELPI+ Product line

  • Dekati - Model DLPI+ - Low Pressure Impactor

    DLPI+ (Dekati® Low Pressure Impactor) is a 14-stage cascade impactor to measure airborne particle mass size distribution. The DLPI+ classifies particles into 14 size fractions in the range of 16nm-10µm. In each size fraction the particles are collected on 25 mm collection substrates that are weighed before and after the measurement to ...

    By Dekati Ltd. Distributor in Fuente el Saz de Jarama, SPAIN. from Low Pressure Impactor Product line

  • Dekati - Model PM10 - Impactor

    Dekati® PM10 impactor is a three stage cascade impactor for determining particle gravimetric mass size distribution. This impactor has cutpoints of 10, 2.5 and 1 µm and if needed some of the stages can be removed from the assembly to make a simpler setup. The Dekati® PM10 impactor is an ideal choice for applications where some ...

    By Dekati Ltd. Distributor in Fuente el Saz de Jarama, SPAIN. from Impactor Product line

  • Aquarius - Ceramic Disc Diffuser

    The Aquarius Ceramic Disc Diffuser is constructed of high temperature composite alumina oxide ceramic that is thermally bonded at high temperatures.The ceramic disc is highly resistant to harsh chemicals often found in industrial wastewater.The density of the ceramic disc across the diffuser varies with the contour profile and peripheral channel, ...

    By Aquarius Technologies, LLC Distributor in SPAIN. from Ceramic Disc Diffuser Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you