Only show results available in Massachusetts? Ok

drainage chamber equipment

  • ROMOLD - Model DN 600 - Drainage Chamber

    PE – Chamber DN 600 for drainage, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), straight and trapezoidal channel DN/OD 250, berm ≤ 1/2 D, connection sleeve on the inlet and outlet spigot, for connection of multifunctional pipe according to DIN 4262-1 type C2, horizontal ...

    By ROMOLD GmbH based in Surheim, GERMANY. from Discharge Systems Product line

  • Premium

    WesTech - Filter Presses

    An excellent choice for achieving optimum solution recovery and maximum solids dryness, the WesTech Filter Press is available from 1m2 to 500m2 at operating pressures up to 25 bar. The press comprises a steel framework with a hydraulic closing cylinder which locks a pack of filter plates in place. The filter plates have an internal recess, with a ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Dewatering Product line

  • Premium

    Slamex - Model SD - Sand Dewatering Unit

    The Slamex SD sand separator with a screw conveyor is designed for sand removal in fully automated mode, and can be used for both sand and other impurities of wastewater provided that the sediment velocity is sufficient. Slimex SD sand separator consists of a steel chamber in which sand is filtered. At the bottom of the chamber there is an ...

    By Econet group Ltd. based in Helsinki, FINLAND. from Water & Wastewater Product line

  • Premium

    ProMinent Ultromat - Model ULFa - Metering Systems

    Extraction rates of up to 8,000 l/h. Polymer batching station Ultromat ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

    By ProMinent GmbH based in Heidelberg, GERMANY. from Metering Systems for Polymers Product line

  • Hofit - Model 600mm- 7205-BZ - Chamber

    600 dia. Chamber, h.400, 5 in. 110/160, zero level, injected, 60 ton

  • Model 62 Series - 3-15 Stack Round Cartridge Housings

    The 62 Series Multi cartridge housing range is designed to accommodate 3, 5, 10, 15, 19, 24, 30 or 40 stacks of filter cartridges up to 40” long. The top opening style is equipped with a Cast Vee clamp as standard for pressures up to 10 bar g. Leg mounted and equipped with the more conventional dished end, these housings suit processes where ...

    By Amazon Filters Ltd based in Camberley, UNITED KINGDOM. from Filter Housings - Multi Cartridge Housings Product line

  • Model 62 Series - 19-40 Stack Round Cartridge Housings

    The 62 Series Multi cartridge housing is designed to accommodate 3, 5, 10, 15, 19, 24, 30 or 40 stacks of filter cartridges up to 40” long. The top opening style is equipped with Rathmann style bolted closures as standard for pressures ranging from 6 - 10 bar g. Leg mounted and equipped with the more conventional dished end, these housings ...

    By Amazon Filters Ltd based in Camberley, UNITED KINGDOM. from Filter Housings - Multi Cartridge Housings Product line

  • Vacuum Membrane Filter Plates

    Vacuum membrane filter plates have a chamber below the drainage surface that is inflated after the filter cake is formed. Heated water 175F°-230F° (higher temperatures may be used with metal cores) is pumped through this cavity, both inflating the membrane against and transferring heat into the filter cake. 

    By Micronics Inc. based in Portsmouth, NEW HAMPSHIRE (USA). from Filter Plates Product line

  • Model DN 315 - Sewage Chambers

    These chambers are built with the following parts: Bottom chamber (straight or connection) to join 160mm or 200mm sewage pipes, PP Single Wall Raising Pipe SN2 available in 1.25, 2, 3 and 6 meter lengths, Telescope with cast iron grid or solid cover (class A15, B125 or D400), Rubber sealing ring between the raising pipe and the telescope, Concrete ...

    By InstalPlast Lask Co.Ltd based in Lask, POLAND.

  • MiniDos - Model A - Smallest Motor Driven Diaphragm Dosing Pump

    The MINIDOS A series is the result of a consistent, ongoing development of proven technology and the use of modern plastics. With dosing rates of 3 l/h up to 39 l/h the MINIDOS leak-proof diaphragm dosing pump has a wide range of application. The MINIDOS A is available as single dosing pump with the dosing head mounted on the right-handside.

    By Lutz-Jesco GmbH based in Wedemark, GERMANY. from Motor Driven Diaphragm Dosing Pumps Product line

  • Nophadrain - Model ND RS-8 - Inspection Chamber

    Inspection chamber with an insulated cap made of galvanised steel, for monitoring the working of the ND Drainage System on extensive green roofs. The inspection chamber is equipped with apertures for the ND Strip 150 Drainage System for use as a linear drainage system for single-layer extensive green roofs.

    By Nophadrain BV based in Kerkrade, NETHERLANDS. from Inspection Chambers Product line

  • Chamber Plate

    The recessed area of the chamber filter plate is molded with conical pips. The surface of the pips provides support for the filter cloths and provides a drain path for the filtrate to exit to the filtrate discharge port. The chamber filter plate can be supplied with customer requested feed eye arrangement. The sealing surface of the chamber filter ...

    By Zhongda Bright Filer Press Co., Ltd. based in Dezhou, CHINA. from Filter Plate Product line

  • SEL - Silt Catchpit

    Purpose-built high density polyethylene (HDPE) pre-fabricated catchpit chambers are ideal for stormwater drainage systems. WASP Catchpit chambers are designed to separate silt and other particles, helping to improve the quality of water before it is reintroduced into the environment. They can be integrated into any drainage system requiring ...

    By SEL Environmental Ltd based in Blackburn, UNITED KINGDOM. from Integrated Water Management Product line

  • JVK - Temperature Controlled Chamber Plate

    The drying of a filter cake in filter press takes places instantenously with heated membrane filter plates (TCM). The specially developed elastic membrane material (e.g. EPDM or FKM) features a very  good heat conductivity. Cake dryness of close to 100% can be achieved by vacuum-assisted removal of  the generated vapour. The ...

    By JVK Filtration Systems GmbH based in Georgensgmünd, GERMANY.

  • Minidos - Model A - Motor-Driven Diaphragm Pumps

    PVC, PVDF and stainless steel dosing head. Double ball valves (standard) or spring loaded single ball valves. Separation chamber between dosing head and gearbox, with drainage pipe. AC motor (standard) or AC motor. Compact design. Gearbox parts as well as bearings are lubricated for life. Manual or manual stroke adjustment (ATE). Stroke counting ...

    By WaterPRO based in Beckenham, NEW ZEALAND. from Motor-Driven Diaphragm Pumps Product line

  • SKE Klearline - Model HCP - Hydraulic Compactor

    SKE hydraulic compactors consist of a stainless steel hopper and chute with a hydraulic compactor to compact screenings.

    By SKE Solutions Ltd based in Co Tyrone, UNITED KINGDOM. from Screens, Strainers & Compactors Product line

  • WaStop - Model HD - Heavy Duty Access Chamber Valve

    The WaAccess Chamber is a complete inspection chamber Ø425 with DN110 – 160mm connections.  Inside the chamber is a WaStop check valve to prevent back-flow.  The ‘easy-remove’ check valve makes the chamber easy to rinse.  The check valve can be removed from ground level.  WaAccess Chamber can be ...

    By WaStop International AB based in Karlshamn, SWEDEN.

  • Global Water - Model 1000L/hr - Grease Muncher

    The Global Water Grease Muncher combines a conventional underflow grease arrestor design with a special bio-filter to dramatically reduce the grease content of the discharge through microbiological activity.

    By Global Water Group based in Tonsley, AUSTRALIA. from Wastewater Treatment Product line

  • Incinerators for Waste Containing Salt

    During incineration of salt-containing wastes, some of the salt will accumulate on the incinerator wall whilst the other part is carried as gas in the flue gas. The arrangement of the combustion chamber must therefore allow for drainage of the salt slag. In the quench system with immersion tube, the slag will be dissolved.

    By Caloric Anlagenbau GmbH based in Graefelfing, GERMANY. from Incinerators & Thermal Oxidisers Product line

  • Membrane Filter Plates and Filter Membranes

    Membrane Filter Press Plates have a chamber below the drainage surface that may be inflated. The common method used is water pressure, which is generated by pumping into the squeeze cavity to inflate the face of the plate against the filter cake. Air may also be used. Membrane Plates are used to reduce the cake moisture content or shorten the ...

    By Micronics Inc. based in Portsmouth, NEW HAMPSHIRE (USA). from Filter Plates Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you