Drainage Pipe Equipment Available In Vatican City
-
Manufactured by Sireg Geotech S.r.lbased in ITALY
Drainage slotted pipes are used to eliminate excess water causing softening or degradation of the soil's mechanical characteristics. Drainage pipes are made of rigid PVC, able to stand all kind of underground water as well as seawater and acid or alkaline diluted solutions. Durvinil® RFS pipes can be ...
-
Manufactured by Geochem Engineering SAbased in GREECE
GEOCHEM ENGINEERING offers special corrugated, double walled and perforated Drainage pipes, suitable for both Civil Engineering and agricultural applications. The offered types come in different outer diameters and optionally in rigid form and wrapped with filter ...
-
Manufactured by Kuzeyborubased in TURKEY
Kuzeyboru Drainage pipe are produced as self-muffed corrugated pipes from 100 mm to 1000 mm. Drainage pipes are also produced as spirally wound from 800 mm to 2400 mm in accordance with TS EN 13476-3 and DIN 16961-16566 international standards. Also we are able to produce in desired diameters and lenghts as per ...
-
Manufactured by Vhm Groupbased in FRANCE
Our range of drainage pipes offers an alternative for each type of effluent (sewage, rainwater, industrial water) suited to the requirements of the ...
-
Manufactured by Bosta BV - part of MegaGroup Export B.V.based in NETHERLANDS
Sewage pipe PVC-U 75 mm x 1,8 mm SN1 plain grey 5m ...
-
Manufactured by JFC Civilsbased in IRELAND
JFC CorriPipe™ is a twinwall drainage pipe manufactured from recycled HDPE. Utilising a twin extrusion process, the two layers are simultaneously extruded one inside the other and heat welded together in one continuous step. The outer wall is corrugated providing excellent structural strength which reduces the possibility of on-site ...
-
Manufactured by MegaGroup Export b.v.based in NETHERLANDS
Sewage pipe PVC-U 75 mm x 1,8 mm SN1 plain grey ...
-
Manufactured by Jilin Tianze Pipe Industry Co., Ltdbased in CHINA
The conventional specifications of commonly used PVC pipe fittings are as follows: nominal outer diameter are: 32mm, 40mm, 50mm, 75mm, 90mm, 110mm, 125mm, 160mm, 180, 200mm, 250mm, 315mm, 400mm, 500mm, ...
-
Distributed by Irrigation-Martbased in USA
4 SDR35 10 FT Perf Bell End ...
-
Manufactured by Aplast d.o.o.based in SLOVENIA
PVC drainage pipes Adren are produced in dimensions of ? 50, 65, 80, 100 and 125 mm, rolled up into rolls at a length of 50 m (up to 200 m per individual ...
-
Manufactured by Düker GmbH & Co. KGaAbased in GERMANY
MLK drainage pipes and fittings by Düker - also known as KML in the market - have been delivered for years with a superior protection and are typically used for grease-containing waste ...
-
Manufactured by Idroter di Martinelli Francescobased in ITALY
IDROSAC PIPE 500 2 x 0.5 x 0.3 m is a certified drainage module consisting of a fabric bag non-woven filled with expanded polystyrene chips, with tubular sock at the base for piping housing; use it in the drainage trenches in landslide, in the vineyards, behind the retaining walls, very light, safe from pose, harmless to the ...
-
Manufactured by LA.RE.TER. SPAbased in ITALY
PVC and HDPE pipes, slotted and micro- slotted, for systems of drainage and/or irrigation under ground. This range is completed by PVC pipes for piezometric research and valved pipes for consolidation. We are able to reply to whatever requirement regarding the width of the slots, the number of matrixes and the height of the ...
-
Manufactured by Armtecbased in CANADA
BOSS 2000 is a dual-wall corrugated HDPE drainage pipe with a smooth inner wall to offer superior hydraulic performance for both storm sewers and culvert applications, ranging from diameters of 100mm to ...
-
Manufactured by Industrie Polieco-Mpb srlbased in ITALY
POLIDREN is a slotted polyethylene pipe, with a corrugated external wall and a smooth internal wall. It is available in coils for the diameters range between OD.63 and OD.200.It has a resistance to compression higher than 300N, with a deformation of the external diameter equal to 5%.Slots are disposed on the whole circumference, every ...
-
Distributed by Funke Kunststoffe GmbHbased in GERMANY
The HS-Underground Drainage Pipe System ≥ 12 kN/m² DN/OD 110 - 800, including a complete wall-reinforced drainage fittings programme (SDR 34) in nominal widths DN/OD 110 - 200 was specially designed for the house connection sector. Among its advantages: high stability, high safety and easy installation. Pipes of such ...
-
Distributed by Funke Kunststoffe GmbHbased in GERMANY
COEX 2000 underground pipes, Funke system, produced by a coextrusion process are suitable for the drainage of domestic and industrial waste waters outside buildings from DN/OD 110 to DN/OD 500 incl. all underground fitting ...
-
Manufactured by Tehnoplast Inzeneringbased in MACEDONIA
Production of water supply and drainage pipes with dimensions: from Ф PN20 to Ф PN250 with 6, 8, 10, 16, 25 and 32 ...
-
Manufactured by Wuhan Kingbull Economic Development Co, Ltdbased in CHINA
PVC-U drainage pipes and fittings for buildings are produced in strict accordance with ISO 3633, AS NZS1260 and GB/T5836.1-2006 and GB/T5836.2-2006 and the product performance and indicators are in line with the requirements of such standards.In the manufacturing of all pipes, high quality raw PVC materials and processing agents as ...
-
Manufactured by Industrie Polieco-Mpb srlbased in ITALY
DRENOSEWER a slotted polyethylene pipe, with a corrugated external wall and a smooth internal wall. It is available in coils of the diameters range between OD.110 and OD.200. It has a resistance to compression higher than 450N, with a deformation of the external diameter equal to 5%. If is offered in two slotting versions: 360° ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you