Drainage Piping Equipment Near Georgia (US)
-
Manufactured by Environmental Composites Inc.based in USA
ECI manufactures Mitered End Section (MES) galvanized steel pipe grates for round or elliptical concrete (RCP) and corrugated metal (CMP) mitered drainage pipes as specified in FL DOT Design Standards Index 273. Rebar frames are also available. The standard lead time for MES pipe grates is 2 - 3 ...
-
Manufactured by Environmental Composites Inc.based in USA
ECI manufactures Mitered End Section (MES) galvanized steel pipe grates for round or elliptical concrete (RCP) and corrugated metal (CMP) mitered drainage pipes as specified in FL DOT Design Standards Index 273. Rebar frames are also available. The standard lead time for MES pipe grates is 2 – 3 ...
-
Manufactured by Presto Geosystemsbased in USA
High-Performance Transition Mats Stop Scour. Protect areas subjected to concentrated flows from scour and surface erosion with Georunner Mats. Fully interconnected mats protect underlying TRMs or erosion control blankets, allowing low-maintenance vegetation at pipe outfalls, drainage ditches and swales instead of costly, higher maintenance rip ...
-
Manufactured by Torishima Pump Mfg. Co., LTDbased in JAPAN
: Irrigation, Drainage. Others : Pipe-Line Boosting, ...
-
Manufactured by YSI Incorporated - a Xylem brandbased in USA
and drainage pipes, as well as other open channel applications like flumes, weirs and square channels. The specially engineered, non-fouling water level sensor works in depths as little as ½ inch and allows for deployment in manholes and other difficult to access areas without the need to enter the confined ...
-
Manufactured by Hancor - a division of Advanced Drainage Systems, Inc. (ADS)based in USA
Single Wall Highway Pipe delivers superior value while providing physical strength and structural design that just cannot be matched by metal or concrete. Each pipe is backed by more than 50 years of pipe and drainage innovation. It is lightweight, which translates into easy handling for faster, less costly ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
Featuring advanced polypropylene resin technology, SaniTite HP Dual Wall Pipe (12”- 30”) is the logical choice for gravity flow sanitary sewer pipe. It offers superior joint performance, chemical abrasion, impact resistance, and additional redundancies and factors of safety not received by comparable ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
PolyFlex Pressure Pipe leads today's markets for water service, agricultural, landscape irrigation, and potable water service applications. Its light weight and chemically resistant composition makes it ideal for a variety of applications. ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
Septic Stack units allow for exceptional soil contact without the use of gravel. The Septic Stack units disperse effluent into the voids in and around the specially-banded ADS pipe. This pipe is engineered with holes and slots, allowing it to disperse the effluent as it passes over the corrugations in the pipe. ...
-
Manufactured by Hancor - a division of Advanced Drainage Systems, Inc. (ADS)based in USA
The Single Wall Muck Pipe is the ideal drainage pipe solution for boggy soil conditions. Designed for soils containing peat or muck, the Single Wall pipe is extruded with larger holes or oblong perforations located in three rows. Additionally, the pipe is encased in a sock to prevent infiltration of the ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
Offering a minimum recycled content of 60 percent, Mega Green HDPE pipe is the ideal choice for sustainable infrastructure projects. Friendly to the environment and structurally sound, this Dual Wall corrugated HDPE pipe meets ASTM F2648 and provides a smooth interior (for hydraulic efficiency) and annular exterior ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
SaniTite HP (High Performance) Triple Wall Pipe couples advanced polypropylene resin technology with a proven and exclusive triple wall (30” - 60”) profile design for superior performance and durability. SaniTite HP meets and exceeds typical standards for pipe stiffness and joint integrity. When specifying pipe per ASTM ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
The Single Wall corrugated HDPE pipe is ideal for drainage projects where flexibility, light weight and low cost are important. Homeowners find that this corrugated pipe is an economical, easy–to–install solution to common residential storm water drainage problems. These may include downspouts run off, foundation and ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
The Dual Wall N-12 pipe, with its smooth interior wall and corrugated exterior, offers exceptional hydraulics and strength. Built using application-specific high-density polyethylene, Dual Wall N-12 corrugated pipe also provides superior corrosion and abrasion resistance. This makes it an excellent alternative to reinforced concrete ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
This high-performance polypropylene (PP) pipe is the perfect choice for gravity-flow storm drainage applications and when premium joint performance and/or greater pipe stiffness is required. It couples advanced polypropylene resin technology with a proven, dual wall profile design for superior performance and durability. The smooth interior ...
-
Distributed by Irrigation-Martbased in USA
4 SDR35 10 FT Perf Bell End ...
-
Manufactured by J.C. Whitlam Manufacturing Companybased in USA
TALON HDPE Drainpipe Adhesive is excellent for bonding high density polyethylene (HDPE) drainage pipe, perforated sewer drainpipe, smoothwall HDPE sewer and drainpipe, standard and heavy-duty smooth wall polyethylene (PE) drainage pipe, triplewall solid HDPE pipe, triplewall perforated HDPE pipe, ...
-
Manufactured by Haviland Drainage Products Cobased in USA
Haviland Drainage’s flexible corrugated pipe is flexible enough to meet the needs of both the Heavy Duty pipe & Tubing market as well as the Agricultural ...
-
Manufactured by Aetna Plastics Corp.based in USA
LabWaste CPVC Corrosive Waste Drainage System is a complete system of pipe, fittings & adapters specifically designed for waste chemical use. One of the key advantages of this system is its excellent resistance to a broad range of corrosive environments. CPVC is inert to most mineral acids, bases, salts and aliphatic hydrocarbons, and ...
-
Manufactured by Springfield Plastics, Inc.based in USA
Springfield Plastics, Inc. is recognized as a leader in the production of quality corrugated plastic pipe drainage fittings for single wall pipe. The single wall pipe fittings are manufactured from plastic pipe, eliminating the need for special adapters to be used to fit the pipe. A full line of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you