Drainage Piping Equipment Near Nevada
-
Manufactured by American Pneumatic Tools (APT)based in USA
Need to work in confined areas? The APT hydraulic core drill is the answer. It’s so compact, you can drill holes of up to 8 inches freehand. This drill is ideal for installing drainage, sewer, and water pipes, as well as cable and ventilation ducts where large, deep holes are ...
-
Manufactured by Andrew J. Foss, Inc.based in USA
requirements of ASTM C 1227 & NPCA. Plumbing pipes and drains that service a home can be run to either side of this mid-seam septic tank or the center inlets. The same drains option is also available on the outlet of the tank, extending out to the leach field from its side or middle outlet drainage pipe. Outlet pipes ...
-
Manufactured by Titan Industries Inc.based in USA
Titan's SURE-DRAIN round hole perforated drainage pipe is available in a broad range of diameters, schedules and classes. Sizes from 1/2' to 24' can be readily produced in wall thichnesses ranging from SDR 35 to SCH 80. A variety of thermoplastic pipe compounds can be used including PVC type I and II, ABS, CPVC, PTFE AND ...
-
Manufactured by Mainline Backflow Products (Can) Inc.based in CANADA
The Pipe Plug is a safe and economical way to pressure test DWV drainage systems. Pipe Plugs can be used for horizontal or vertical testing applications. They simply slide into the cleanout and once pressure testing is complete, they ‘tear’ out of the system by pulling on the cord attached to the pull tab. Quick and efficient as ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
Offering a minimum recycled content of 60 percent, Mega Green HDPE pipe is the ideal choice for sustainable infrastructure projects. Friendly to the environment and structurally sound, this Dual Wall corrugated HDPE pipe meets ASTM F2648 and provides a smooth interior (for hydraulic efficiency) and annular exterior ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
SaniTite HP (High Performance) Triple Wall Pipe couples advanced polypropylene resin technology with a proven and exclusive triple wall (30” - 60”) profile design for superior performance and durability. SaniTite HP meets and exceeds typical standards for pipe stiffness and joint integrity. When specifying pipe per ASTM ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
The Single Wall corrugated HDPE pipe is ideal for drainage projects where flexibility, light weight and low cost are important. Homeowners find that this corrugated pipe is an economical, easy–to–install solution to common residential storm water drainage problems. These may include downspouts run off, foundation and ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
This high-performance polypropylene (PP) pipe is the perfect choice for gravity-flow storm drainage applications and when premium joint performance and/or greater pipe stiffness is required. It couples advanced polypropylene resin technology with a proven, dual wall profile design for superior performance and durability. The smooth interior ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
The Dual Wall N-12 pipe, with its smooth interior wall and corrugated exterior, offers exceptional hydraulics and strength. Built using application-specific high-density polyethylene, Dual Wall N-12 corrugated pipe also provides superior corrosion and abrasion resistance. This makes it an excellent alternative to reinforced concrete ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
Septic Stack units allow for exceptional soil contact without the use of gravel. The Septic Stack units disperse effluent into the voids in and around the specially-banded ADS pipe. This pipe is engineered with holes and slots, allowing it to disperse the effluent as it passes over the corrugations in the pipe. ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
Featuring advanced polypropylene resin technology, SaniTite HP Dual Wall Pipe (12”- 30”) is the logical choice for gravity flow sanitary sewer pipe. It offers superior joint performance, chemical abrasion, impact resistance, and additional redundancies and factors of safety not received by comparable ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
PolyFlex Pressure Pipe leads today's markets for water service, agricultural, landscape irrigation, and potable water service applications. Its light weight and chemically resistant composition makes it ideal for a variety of applications. ...
-
Manufactured by ADS Pipe Canadabased in CANADA
N-12® pipe is the world standard for corrugated polyethylene drainage pipe. Introduced in 1987, N-12 dual wall pipe with its smooth interior wall and corrugated exterior wall, offers exceptional hydraulics and strength. Built using application specific high-density polyethylene, N-12 corrugated pipe also ...
-
Manufactured by Northern Plains Drainage Systems Ltdbased in CANADA
We supply single wall pipe in maxi rolls in sizes from 3″ up to 15″ diameter. Pipe is available in a variety of perforations, as well as with sock barrier, and non-perforated configuration. Please contact us for more information regarding roll lengths and the most suitable form for your soil and project ...
-
Manufactured by Northern Plains Drainage Systems Ltdbased in CANADA
Dual wall pipe is supplied in 20′ lengths. The smooth interior offers superior flow capacity over single-wall pipe, and the rigid structure is a lot more durable, making it the best choice where pipes will be laid into trenches. Contact us with any questions and for pricing and delivery timelines for your ...
-
Manufactured by Optronic GmbHbased in GERMANY
Video camera system for inspecting DN 50 to DN 250 pipes in and around the house The San-Scope 6.0 is a rugged camera system, designed specially for inspecting drainage pipes. With advanced m-LED technology, the camera heads illuminate up to DN 250 pipes. The 50 m fiberglass pushrod can negotiate around several 90° bends in a ...
-
Distributed by Irrigation-Martbased in USA
4 SDR35 10 FT Perf Bell End ...
-
Manufactured by Springfield Plastics, Inc.based in USA
Springfield Plastics, Inc. is recognized as a leader in the production of quality corrugated plastic pipe drainage fittings for single wall pipe. The single wall pipe fittings are manufactured from plastic pipe, eliminating the need for special adapters to be used to fit the pipe. A full line of ...
-
Manufactured by Presto Geosystemsbased in USA
High-Performance Transition Mats Stop Scour. Protect areas subjected to concentrated flows from scour and surface erosion with Georunner Mats. Fully interconnected mats protect underlying TRMs or erosion control blankets, allowing low-maintenance vegetation at pipe outfalls, drainage ditches and swales instead of costly, higher maintenance rip ...
-
Manufactured by Torishima Pump Mfg. Co., LTDbased in JAPAN
: Irrigation, Drainage. Others : Pipe-Line Boosting, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you