Only show results in Connecticut? Ok

drainage plate equipment

  • Geoplas - Drainage Plate

    The drainage plate is a high density polyethylene (HDPE) based insulation protection and drainage material. It creates air gap between the soil and the building element, allowing the building to breathe, the water to be flowed safely thanks to its blistered structure, high mechanical properties and durability against loads and crushing during ...

    By Geoplas based in Ankara, TURKEY.

  • Premium

    WesTech - Filter Presses

    An excellent choice for achieving optimum solution recovery and maximum solids dryness, the WesTech Filter Press is available from 1m2 to 500m2 at operating pressures up to 25 bar. The press comprises a steel framework with a hydraulic closing cylinder which locks a pack of filter plates in place. The filter plates have an internal recess, with a ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Dewatering Product line

  • Multi-Plate - Drainage Solutions And Water Treatment

    Multi-Plate is a versatile and economical pipe and bridge product with a proven history of performance dating back to 1932. It is a component system, made of curved, corrugated galvanized steel plates, fasteners and, where applicable, footing channels. Structures are assembled in the field using plates curved specifically for the particular shape ...

    By Armtec based in Concord, ONTARIO (CANADA). from Drainage Solutions And Water Treatment Product line

  • Premium

    Aquaburg - Resistant and Resilient Flood Products

    A Germany product that we discovered which has which is similar in principle to our own Rapidam product but with different attributes and benefits, that fits into our product range. This barrier needs to be pre-installed into a purpose built trough with in-built water management to protect the barrier’s fabric. Cost effective, easy to ...

    By Aquobex Ltd. based in Didcot, UNITED KINGDOM. from Commercial Flood Products Product line

  • Geoser - Drainage Board

    Drainage Plate is insulation protection and drainage material produced from high-density polyethene (HDPE) raw materials. Between the floor and the structure, due to its protruding structure, creates air gaps, allowing the building to breathe and drain the water around the structure at the desired location. Provides protection against load and ...

    By Geoser based in Yenimahalle/Ankara, TURKEY.

  • Driptray Base

    Stainless steel, gold-plated, with drainage, with glassfountain.

    By CELLI S.p.A. based in Rimini, ITALY. from Driptrays and Sinks Product line

  • Geosky - Drainage Board

    There are two series of drainage board: roller material & sheet material. The roller material includes three types: thermal melting, lapping & self-adhered. The molding process adopts special technology to press the plastic sheet material out of the closed convex columnar shell to form concave-convex film. The shell is continuous and has ...

    By Shandong Geosky Technology Co., Ltd based in Daiyue District, Taian, CHINA. from Drain Product line

  • Filter Presses with Frames and Plates

    The filtration chambers of the filter presses with frames consist of two types of plates: frame and filtrating. The frame defines a filtration chamber and it is closed on both sides by the adjacent filtration plates with drainage draining filtrate. The thickness of the frame plate determines the thickness of the filtration cake – it usually ...

    By ENVITES, spol. s r.o. based in Brno, CZECH REPUBLIC. from Filter Presses Product line

  • Envites - Filter Presses with Frames and Plates

    This is the most commonly used type of filer presses. The working area consists of a filtration chamber created by mutual shifting of two adjacent filtration plates to each other. In the flat parts of the plates there are recesses with a drainage system. The total depth of recesses in both the adjacent plates determines the thickness of the final ...

    By ENVITES, spol. s r.o. based in Brno, CZECH REPUBLIC. from Filter Presses Product line

  • ErtelAlsop - Model EFS Series - Plate and Frame Filter Press

    The EFS Series plate and frame filter press is internally ported, and is the most economical 12-inch square plate and frame filter press ErtelAlsop manufactures. The standard model EFS ships cart mounted with our BioClean Plates, and a hand wheel closure with 5 ton hand hydraulic assist. Options for the EFS 12' plate and frame filter include the ...

    By ErtelAlsop based in Kingston, NEW YORK (USA). from Plate & Frame Filter Presses Product line

  • Filter Presses with Membrane Plates

    The working room of the membrane filter press consists of chambers, limited by two adjacent plates with recesses in the central part. Unlike the chamber plates, the drainage draining the filtrate is located on movable membranes serving for pressing and „wringing“ of the filtrated cake.

    By ENVITES, spol. s r.o. based in Brno, CZECH REPUBLIC. from Filter Presses Product line

  • Model REL / FEL - Enclosed Skips

    Standard Specification on All Sizes Includes. Fork Pockets Sides and Bottom. Front Bump Plates. Goalpost. Double 76 X 38mm Rail. Rope Hooks. Full Length gussets. Fully Forged Lugs With Backing Plates. Fully Welded All Over. Drainage Holes. Welded Numbers Upon Request. Heavy Duty Hot Rolled Steel 5mm Base and 4mm Sides And Roof. Lockable Steel ...

    By The Skip Factory Ltd based in Christchurch, UNITED KINGDOM.

  • Enclosed Skips Container

    Standard Specification on All Sizes Includes. Double or Single Tip. Double 76 X 38mm Rail. Rope Hooks. Full Length Gussets. Fully Forged Lugs With Backing Plates. Fully Welded All Over. Drainage Holes. Welded Numbers Upon Request. Heavy Duty Hot Rolled Steel 5mm Base and 4mm Sides And Roof. Lockable Steel Lids. Anti-Corrosive High Yield Paint.

    By The Skip Factory Ltd based in Christchurch, UNITED KINGDOM.

  • Storage Container

    Standard Specification on All Sizes includes Double 76 x 38mm rail, Inside Support, rope hooks, single or double door, lockable, full length gussets, fully forged lugs with sacking plates, fully welded all over, drainage holes, welded numbers upon request.

    By The Skip Factory Ltd based in Christchurch, UNITED KINGDOM.

  • Standard Skips Container

    Standard Specification on All Sizes includes: Flat Top or Boat Shape. Double or Single Tip. Double 76 X 38mm Rail. Rope Hooks. Full Length Gussets. Fully Forged Lugs With Backing Plates. Fully Welded All Over. Drainage Holes. Welded Numbers Upon Request. Heavy Duty Hot Rolled Steel 5mm Base and 4mm Sides and Roof. Anti-Corrosive High Yield Paint.

    By The Skip Factory Ltd based in Christchurch, UNITED KINGDOM.

  • Padovan - Horizontal Plates D.E. Filter

    Thanks to the original patented Padovon design, the filter plates: Are plain and indeformable; Assure an elevated drainage flow during filtration and precoating, besides a complete and accurate washing, even under the filtering cloth; Are made of stainless steel AISI 304 sheet provided with drawn reliefs, against which is placed the filtering ...

    By TMCI PADOVAN S.p.A based in Vittorio Veneto (TV), ITALY. from Carbohydrates Product line

  • Padovan - Horizontal Plates D.E. Filter

    Thanks to the original patented Padovon design, the filter plates: Are plain and indeformable; Assure an elevated drainage flow during filtration and precoating, besides a complete and accurate washing, even under the filtering cloth; Are made of stainless steel AISI 304 sheet provided with drawn reliefs, against which is placed the filtering ...

    By TMCI PADOVAN S.p.A based in Vittorio Veneto (TV), ITALY. from Oil Product line

  • BIRCOcanal - Supply Channel

    BIRCOcanal is an economically sound solution for safely laying lines and pipes in production halls, trade fair centres and public buildings, as well as internal and external industrial areas.

    By BIRCO GmbH based in Baden-Baden, GERMANY. from Heavy Duty Product line

  • Padovan - Horizontal Plates D.E. Filter

    Thanks to the original patented Padovon design, the filter plates: Are plain and indeformable; Assure an elevated drainage flow during filtration and precoating, besides a complete and accurate washing, even under the filtering cloth; Are made of stainless steel AISI 304 sheet provided with drawn reliefs, against which is placed the filtering ...

    By TMCI PADOVAN S.p.A based in Vittorio Veneto (TV), ITALY. from Milk and Derivatives Product line

  • Recessed Filter Plates for Any Brand of Filter

    Recessed filter plates are designed for 7, 15, and 20 bar operation (100/225/300psi) in a recessed plate filter press. They are available for sidebar or overhead press designs. Mounting hangers or side handles can accommodate any brand of filter.

    By Micronics Inc. based in Portsmouth, NEW HAMPSHIRE (USA). from Filter Plates Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you