drainage pumping equipment in Europe

  • Premium

    Vertical Pumping Station

    Our vertical Pumpstor Commercial pumping stations are ideal for developments and premises where drainage by gravity isn't an option.

    By Kingspan Water & Energy based in Co. Armagh, NORTHERN IRELAND. from Vertical Pumping Station Product line

  • Premium

    BBA Pumps - Model BA500G D675 - High Flow Flood Relief Pump

    The 20' diesel set is often the first choice from our large volume pumps series. This is because the BA500G produces a relatively high pressure, allowing the pump to discharge water over considerable distances and through extended drainage lines. This is especially suitable for dredging and land reclamation. In addition, the favorable ...

    By BBA Pumps North America Office in Doetinchem, NETHERLANDS. from High Flow Flood Relief Pump Product line

  • Model MB 110 - Resin-Encased Horizontal Centrifugal Pumps

    MB 110 resin-encased horizontal centrifugal pumps are pumps operated by a direct-drive motor (max 3000 rpm) for fast fluid transfer and/or drainage with flow rates ranging from 6 to 75 m3/hour. Their special open-impeller design allows pumping even with very dirty liquids having apparent viscosity up to 500 cps (at 20°C) and small suspended ...

    By DEBEM s.r.l. based in Busto Arsizio (Va), ITALY. from Resin-Encased Horizontal Centrifugal Pumps Product line

  • DEBEM - Model MB 80 - Horizontal Centrifugal Pumps

    MB 80 resin-encased horizontal centrifugal pumps are pumps operated by a direct-drive motor (max 3000 rpm) for fast fluid transfer and/or drainage with flow rates ranging from 6 to 75 m3/hour. Their special open-impeller design allows pumping even with very dirty liquids having apparent viscosity up to 500 cps (at 20°C) and small suspended ...

    By DEBEM s.r.l. based in Busto Arsizio (Va), ITALY. from Horizontal Centrifugal Pumps Product line

  • MultiCut - Model PKS-D 1000 - Plastic Pumping Stations

    Plastic pumping stations for sewage pumps, suitable for areas with motor vehicle traffic.Pumps for pressure drainage systems for urban areas or individual dwellings

    By Jung Pumpen GmbH based in Steinhagen, GERMANY. from Plastic Pumping Stations Product line

  • Model DSO Max1 Series - Dual Macerator Pumping Station

    Dual macerator sewage pumping station is a complete 'job ready - fully assembled'product for use in areas where gravity flow is not available. It is used for various drainage applications, with the DSO-max 1 system also used for the transfer of sewage or grey/waste water, all specially designed for easy installation. Complete with high water ...

    By Drainage Systems Online based in Warrington, UNITED KINGDOM. from Dual Macerator Pumping Station Product line

  • LKT - Model VARIO - Shaft Systems

    The 'LKT-VARIO' pumping stations are specially designed for pressure drainage. A variety of models with differing shaft designs are available. These systems can be set up according to the intended application.

    By Lausitzer Klärtechnik GmbH based in Luckau-Duben, GERMANY. from Shaft Systems Product line

  • High Volume Vehicle Drainage

    A quick and simple system for effective de-polluting of End of Life Vehicles(ELV). The Vehicle De-pollution Unit (VDU) provides a packaged solution for removing all the required fluids from an ELV and pumping them to a fluid storage facility. The unit integrates a 3T scissor lift to access the underside of the vehicle, although it can be used with ...

    By Crow Environmental Ltd based in Ipswich, UNITED KINGDOM.

  • FlexJet - Model 20053000000 - Trailer Jetters

    The FlexJet is a super compact trailer with a powerful pump, suitable for professional unblocking and cleaning of drains and sewers up to 300 mm. The trailer is suitable for drainage companies, water authorities, councils, building contractors and civil engeineers. Due to the streamlined and modern design the FlexJet has a low air resistance. ...

    By Rior B.V./Rioned based in Tilburg, NETHERLANDS. from Trailer Jetters Product line

  • Chromatography Spares - Bath Cryostat

    Refrigerated bath with recirculation controlled by microprocessor, with integrated high precision Pt100 sensor.  Inner tank made of stainless steel AISI 304 and metallic housing protected with an Epoxi paint of great resistance to orrosion. Digital display LCD backlighted with indication of the selected and real value of temperature. CFC free ...

    By Chromatography Spares based in Thessaloniki, GREECE. from Bath Cryostat Product line

  • Model KWS - Archimedean Screw Pumps

    KUHN KWS archimedean screw pumps are lifting devices, which are extremely well-suited for sewage transport and as drainage pumps and are unsurpassed by any other type of pump in terms of technology and efficiency. They are mainly used as intermediate lifting stations in sewer networks, as draw and polder pumping stations, as inlet pumps for sewage ...

    By Kuhn Technische Anlagen GmbH based in Höpfingen, GERMANY. from Archimedean Screw Pumps Product line

  • Model T-T100 - Submersible Drainage Pumps

    The T-T100 is a submersible drainage pump for clean water suitable for domestic and industrial use, tank filling and many other applications. 0.37-0.9kW, 8m maximum head and 160l/min maximum capacity. The T-T100 is a submersible drainage pump for clean water, with non-abrasive particles (max. solids bodies: 5mm). It has a stainless steel body, ...

    By T-T Pumps Ltd. based in Woore, UNITED KINGDOM. from Submersible Drainage Pumps Product line

  • ESPA - Model Drain 100 - Submersible Pumps

    Submersible pumps for the drainage of water without solids in suspension. Materials: Discharge body and upper mounting in cast iron. Impeller in tecnopolomer. Double mechanical seal in ceramic/grafito/NBR. Filter in rigid plastic. Motor housing and transport handle in stainless steel AISI 304.

    By Espa Pumps (UK) Ltd based in Essex, UNITED KINGDOM. from Submersible Pumps Product line

  • Weda Pump - Model RL 4060 - Submersible Drainage Pump

    The RL4060 is one of Weda Pump heavy-duty best sellers, especially in medium head versions. Many of our customers in the navy worldwide have selected thismodel with an epoxy coatingfor its high capacity (3400 Ltr./min). This model is also particularly recommended for mining applications and big constuction sites as it is really versatile owing to ...

    By WEDA Pump based in Groningen, NETHERLANDS.

  • Weda Pump - Model RL 4150 - Submersible Drainage Pump

    The RL4150 is designed for heavy-duty applications. It combines high capacity (3.000 Ltr./min) and flexibility owing to the various impeller versions that can be adapted on the pump for each site configuration. It is a genuine 'plug-and-play' model, very easy to install and featuring unattended operation as it can be equipped with a build-in NVB ...

    By WEDA Pump based in Groningen, NETHERLANDS.

  • Flutbox

    The water level is rising. Flutbox Flood Helpers keep their cool. Thanks to the original Flutbox emergency flood kit from Jung Pumpen you can drain your basement in record time. The powerful submersible pump can drain the equivalent of three full bathtubs in just 60 minutes. The unit’s sturdy fire hose can handle up to five times as much ...

    By Beaver Schutzsysteme AG based in Grosswangen, SWITZERLAND. from Flutbox Product line

  • Hidrostal - Axial Flow Submersible Pumps

    Pumps made for low head applications. The Hidrostal axial flow pump is designed for low head applications up to 15m, and flows from 30 to 1400 l/s. It is commonly used when large volumes of liquid have to be transferred at relatively low lift conditions for applications such as Land Drainage Pumping Stations. An axial-flow pump is simple in ...

    By Hidrostal Holding AG based in Neunkirch, SWITZERLAND. from Axial Flow Submersible Pumps Product line

  • Model RE-SS Ex - Drum Pump for Complete Drum Drainage

    Liquid examples: Gasoline, solvents, alcohols, amines, benzene, toluene, xylene, perfume oils, paints and lacquers, etc.

    By Lutz Pumpen GmbH based in Wertheim, GERMANY. from Drum Pump for Complete Drum Drainage Product line

  • SEDA - Easy Drainage System

    The SEDA EasyDrain is an ideal solution to drain End of life vehicles (ELV) of all liquids. Individual pumps and specialist draining tools remove virtually all liquids in a safe and efficient manor.

    By SEDA Umwelttechnik GmbH based in Kössen/Tirol, AUSTRIA. from Easy Drainage System Product line

  • Tsurumi - Model LSC4 - Drainage Pump

    The LSC1.4S or “puddle sucker” is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position 50mm(1”) outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid ...

    By Tsurumi Pumps Office in GERMANY. from Drainage Pump Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you