We couldn't find any drill cuttings equipment suppliers or service providers located in Lebanon

Here is a list of equipment results with suppliers serving Lebanon

drill cuttings equipment available in Lebanon

  • Premium

    VacuDry - Vacuum Distillation Unit For Refinery And Drilling Waste

    Applications and design, Process: Indirect Heated Vacuum Thermal Desorption / Vacuum Distillation. Source: Tank cleaning sludge from crude oil tanks. Oil lagoons, oil pits, sedimentation ponds. Solid phase from centrifugation. Drill cuttings, oil based mud (OBM). Contaminated materials from pipeline leakage. Input Material: Sludges with varying ...

  • Premium

    Hoover Ferguson - Offshore Mud Skips & Cutting Boxes

    Hoover Ferguson offshore skips are used for transportation and safe handling of hydrocarbon contaminated drill cuttings to and from offshore platforms. These units provide a safe and efficient means of containment of drilling waste for transport to treatment and disposal sites.

    By Hoover Ferguson based in Houston, TEXAS (USA). from Offshore Mud Skips & Cutting Boxes Product line

  • Premium

    Cutting & Tapping Fluid Spray - 12 Cans/Case

    This thick clinging aerosol lubricant enhances the production capabilities of cutting a drilling bits and prevents friction damage. This product was designed to withstand rigorous operating conditions and extreme pressure to make cutting and drilling bits perform better at lower operating temperatures. It adheres to blades and bits with no fly off ...

    By Interstate Products Inc based in Sarasota, FLORIDA (USA). from Cutting & Tapping Fluid Spray - 12 Cans/Case Product line

  • SAS - Model MIST 103 - Drill Cuttings Cleaning System

    The SAS MIST 103 System is capable of cleaning drill cuttings at a rate of 5 - 40 tons per hour and achieve 0.2% - 3% oil cuttings. A very robust system that is easily moved and has low upfront investment costs, high throughout and is very versatile. The MIST 103 system will treat a range of solid waste types and heavy oil sludge. When combined ...

    By SAS Environmental Services Ltd. based in Livingston, UNITED KINGDOM. from Drill Cuttings Cleaning System Product line

  • Premium

    Hoover Ferguson - Mud Skip / Cutting Boxes - Roll Back Lid

    Hoover Ferguson offers a 9,000 gallon offshore mud skip/cutting box to safely handle and transport hydrocarbon contaminated drill cuttings to and from offshore platforms. These units provide a safe and efficient means of containment of drilling waste for transport to treatment and disposal sites. This unit is DNV 2.7-1 approved and DOT 49CFR ...

    By Hoover Ferguson based in Houston, TEXAS (USA). from Mud Skip / Cutting Boxes - Roll Back Lid Product line

  • Premium

    DRILL-TERGE - Drilling Detergent/Wetting Agent

    DRILL-TERGE is a liquid solution of non-ionic surfactants formulated to increase wetting properties of drilling fluids. DRILL-TERGE coats the cuttings created in the drilling process and allows for easier lifting and removal. DRILL-TERGE also coats the drill pipe and drilling tools which prevents clays from sticking to the metal surfaces.

    By Colloid Environmental Technologies Company (CETCO) based in Hoffman Estates, UNITED KINGDOM. from Drilling Detergent/Wetting Agent Product line

  • Showcase

    Model 04.15.SB - Hard Soils 7m Liner Sampler Stand Set

    With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Hard Soils 7m Liner Sampler Stand Set Product line

  • Supermill - Model 4.625 - PDC Bit

    Our 4-5/8” SUPERMILL is the best PDC BIT on the planet for drilling out composite frac plugs in 5-1/2” 20 LB/FT Casing. Our new SUPERMILL represents a completely new design featuring multiple blades and far more PDC cutters than any comparable tool on the market. We designed the SUPERMILL specifically for long range frac plug milling.

    By Torquato Drilling Accessories, Inc. based in Old Forge, PENNSYLVANIA (USA).

  • Vertical Cuttings Dryer

    The GNCD930 Cuttings Dryer is a vertical type centrifuge has has been proven to be one of the most effective waste management equipment for oil- or synthetic- based drilling operations. The cuttings dryer can effectively clean the drilled cuttings, recover the maximal drilling fluids and reduce the volumes of drilling wastes that has to be ...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Cuttings Treatment Technology

    Drill cuttings are the broken bits of solid material removed from a borehole drilled. Boreholes drilled in this way include oil or gas wells, water wells, and holes drilled for geotechnical investigations or mineral exploration. Drill cuttings are produced as the rock is broken by the drill bit advancing through the rock or soil; the cuttings are ...

    By SoilTech AS based in Tananger, NORWAY.

  • Elgin - Model CSI-03 & CSI-04 - Water-Based Vertical Cuttings Dryers

    As our industry evolves, we are faced with increasing responsibility to protect the environment in which we operate. Concurrently, government agencies continue to increase pressure toward achieving these goals by placing stringent effluent limitations on the discharge of contaminated drill cuttings to the environment.  Elgin has become the ...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Water-Based Vertical Cuttings Dryers Product line

  • Horizontal Direction Drilling (HDD) bits

    Sandvik HDD roller-cone rock bits and reamers are specifically designed to meet the rigorous demands of horizontal directional drilling. The cutting structures and bearing designs lower torque requirements, resulting in higher penetration rates and longer operating hours. Sandvik HDD products enable contractors to drill and ream more and longer ...

    By Sandvik Mining and Construction B.V based in Amsterdam, NETHERLANDS. from Horizontal Direction Drilling (HDD) bits Product line

  • Cutting Tool

    The Ruhrpumpen Coke Drilling / Cutting Tool offers significant design advantages in operation and safety. It is designed for minimum torque and requires minimal lift force due to its reduced cross-sectional area. The Ruhrpumpen Manual Switching Tool has been available since 2001, and the AutoSwitch version has been available since 2006.

    By RUHRPUMPEN GmbH based in Witten, GERMANY. from Cutting Tool Product line

  • Thermomechanical Cuttings Cleaner Unit (TCC)

    The TCC technology converts kinetic energy to thermal energy in a thermal desorption process that efficiently separates and recovers the components of drilling waste whilst preserving the original quality of the components prior to treatment. As a result the recovered base oil can for example be re-used in new Oil Based Mud (OBM) or as fuel ...

    By Thermtech AS based in Paradis, NORWAY.

  • Premium

    Draygon - Model SC2 TP - Triple Power Industrial Vacuum Single Phase Dust Extractor

    The SC2TP is a triple powered (electric, propane or gas) dust extractor that can tackle up to 400 m3/h, allowing the user to work without unnecessary interruptions. The SC2TP is not just powerful, robust and effective but also versatile. It can handle all kinds of fine dusts and materials created on a construction site from cutting concrete, ...

    By Draygon LLC based in Venice, FLORIDA (USA). from Triple Power Industrial Vacuum Single Phase Dust Extractor Product line

  • BoreMaster - Model ZX-1000 - Cutting-Edge Well Drilling Equipment

    Hydra-Fab Manufacturing, Inc. in Phenix City, Alabama, manufactures a variety of well drilling equipment. Our flagship product is the BoreMaster ZX-1000, a rig designed for heavy-duty drilling.

    By Hydra Fab Manufacturing, Inc. based in Phenix City,, ALABAMA (USA).

  • Drilling Muds

    For economical reasons circulation drilling methods succeeded in well construction in most of the cases. These drilling methods are using mud ingredients for the removal of cuttings from the borehole bottom.

    By German Water & Energy (GWE) pumpenboese GmbH based in Peine, GERMANY.

  • Swivel Conveyors

    Swivel screw conveyors are used in the waste management industry. Drill cutting screw conveyors are mainly used to collect drilling cuttings separated from solids control equipment such as shale shakers, desanders, barite recovery centrifuge, etc.

    By Screw Conveyor Limited based in Aberdeen, UNITED KINGDOM. from Swivel Conveyors Product line

  • Palmieri - Cutting Booms

    Another very active and long established business at Palmieri Tunnelling and Drilling is the design and manufacture of Cutting Booms to be mounted within Tunnelling shield or on excavators. Dating back to the early seventies, Palmieri has manufactured a large number of equipments using the Cutting Boom, which is particularly useful for those ...

    By Palmieri S.p.A. based in Gaggio Montano (BO), ITALY. from Cutting Booms Product line

  • Drilled Shafts

    Drilled shafts are cylindrical bodies made of concrete (with or without reinforcement) which are installed in the ground by a variety of methods. They transmit high structural loads into lower, load-bearing soils. When installed in rows or in secant configuration they can form a supporting wall for an excavation pit or cut in the terrain, or block ...

    By BAUER Foundation Corp. (BFC) based in Odessa, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you