We couldn't find any drill cuttings equipment suppliers or service providers located in Myanmar

Here is a list of equipment results with suppliers serving Myanmar

drill cuttings equipment available in Myanmar

  • SAS - Model MIST 103 - Drill Cuttings Cleaning System

    The SAS MIST 103 System is capable of cleaning drill cuttings at a rate of 5 - 40 tons per hour and achieve 0.2% - 3% oil cuttings. A very robust system that is easily moved and has low upfront investment costs, high throughout and is very versatile. The MIST 103 system will treat a range of solid waste types and heavy oil sludge. When combined ...

    By SAS Environmental Services Ltd. based in Livingston, UNITED KINGDOM. from Drill Cuttings Cleaning System Product line

  • Supermill - Model 4.625 - PDC Bit

    Our 4-5/8” SUPERMILL is the best PDC BIT on the planet for drilling out composite frac plugs in 5-1/2” 20 LB/FT Casing. Our new SUPERMILL represents a completely new design featuring multiple blades and far more PDC cutters than any comparable tool on the market. We designed the SUPERMILL specifically for long range frac plug milling.

    By Torquato Drilling Accessories, Inc. based in Old Forge, PENNSYLVANIA (USA).

  • Vertical Cuttings Dryer

    The GNCD930 Cuttings Dryer is a vertical type centrifuge has has been proven to be one of the most effective waste management equipment for oil- or synthetic- based drilling operations. The cuttings dryer can effectively clean the drilled cuttings, recover the maximal drilling fluids and reduce the volumes of drilling wastes that has to be ...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Cuttings Treatment Technology

    Drill cuttings are the broken bits of solid material removed from a borehole drilled. Boreholes drilled in this way include oil or gas wells, water wells, and holes drilled for geotechnical investigations or mineral exploration. Drill cuttings are produced as the rock is broken by the drill bit advancing through the rock or soil; the cuttings are ...

    By SoilTech AS based in Tananger, NORWAY.

  • Elgin - Model CSI-03 & CSI-04 - Water-Based Vertical Cuttings Dryers

    As our industry evolves, we are faced with increasing responsibility to protect the environment in which we operate. Concurrently, government agencies continue to increase pressure toward achieving these goals by placing stringent effluent limitations on the discharge of contaminated drill cuttings to the environment.  Elgin has become the ...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Water-Based Vertical Cuttings Dryers Product line

  • Cutting Tool

    The Ruhrpumpen Coke Drilling / Cutting Tool offers significant design advantages in operation and safety. It is designed for minimum torque and requires minimal lift force due to its reduced cross-sectional area. The Ruhrpumpen Manual Switching Tool has been available since 2001, and the AutoSwitch version has been available since 2006.

    By RUHRPUMPEN GmbH based in Witten, GERMANY. from Cutting Tool Product line

  • Horizontal Direction Drilling (HDD) bits

    Sandvik HDD roller-cone rock bits and reamers are specifically designed to meet the rigorous demands of horizontal directional drilling. The cutting structures and bearing designs lower torque requirements, resulting in higher penetration rates and longer operating hours. Sandvik HDD products enable contractors to drill and ream more and longer ...

    By Sandvik Mining and Construction B.V based in Amsterdam, NETHERLANDS. from Horizontal Direction Drilling (HDD) bits Product line

  • Thermomechanical Cuttings Cleaner Unit (TCC)

    The TCC technology converts kinetic energy to thermal energy in a thermal desorption process that efficiently separates and recovers the components of drilling waste whilst preserving the original quality of the components prior to treatment. As a result the recovered base oil can for example be re-used in new Oil Based Mud (OBM) or as fuel ...

    By Thermtech AS based in Paradis, NORWAY.

  • BoreMaster - Model ZX-1000 - Cutting-Edge Well Drilling Equipment

    Hydra-Fab Manufacturing, Inc. in Phenix City, Alabama, manufactures a variety of well drilling equipment. Our flagship product is the BoreMaster ZX-1000, a rig designed for heavy-duty drilling.

    By Hydra Fab Manufacturing, Inc. based in Phenix City,, ALABAMA (USA).

  • Drilling Muds

    For economical reasons circulation drilling methods succeeded in well construction in most of the cases. These drilling methods are using mud ingredients for the removal of cuttings from the borehole bottom.

    By German Water & Energy (GWE) pumpenboese GmbH based in Peine, GERMANY.

  • Swivel Conveyors

    Swivel screw conveyors are used in the waste management industry. Drill cutting screw conveyors are mainly used to collect drilling cuttings separated from solids control equipment such as shale shakers, desanders, barite recovery centrifuge, etc.

    By Screw Conveyor Limited based in Aberdeen, UNITED KINGDOM. from Swivel Conveyors Product line

  • Drilled Shafts

    Drilled shafts are cylindrical bodies made of concrete (with or without reinforcement) which are installed in the ground by a variety of methods. They transmit high structural loads into lower, load-bearing soils. When installed in rows or in secant configuration they can form a supporting wall for an excavation pit or cut in the terrain, or block ...

    By BAUER Foundation Corp. (BFC) based in Odessa, FLORIDA (USA).

  • Palmieri - Cutting Booms

    Another very active and long established business at Palmieri Tunnelling and Drilling is the design and manufacture of Cutting Booms to be mounted within Tunnelling shield or on excavators. Dating back to the early seventies, Palmieri has manufactured a large number of equipments using the Cutting Boom, which is particularly useful for those ...

    By Palmieri S.p.A. based in Gaggio Montano (BO), ITALY. from Cutting Booms Product line

  • Vanguard Arabia - Drill Bits

    Vanguard Arabia roller cone drill bits drill longer distances in the Middle East’s less-abrasive, hard-carbonate formations. These tungsten carbide insert (TCI) roller cone drill bits have super-tough carbide grades that minimize breakage from impact damage. You can rely on the improved cutting structure and seal life for greater ...

    By Baker Hughes, a GE company based in Houston, TEXAS (USA). from Drill Bits Product line

  • Synova - Model MCS 300 - Metal Cutting Systems

    The MCS 300 integrates Synova’s Laser MicroJet technology with a Makino-based platform. The 3-axis machine enables high-precision metal and hard material machining such as cutting, drilling and grooving.

    By Synova S.A. based in Duillier (Nyon), SWITZERLAND. from Metal Cutting Systems Product line

  • Skip Station

    Screw conveyors are utilised to transfer solid waste or slurry from solids control equipment to drilling waste containers, barges or to a point of treatment such as a Slurrification Unit for drill cuttings reinjection.

    By Screw Conveyor Limited based in Aberdeen, UNITED KINGDOM.

  • GreenCut - Cutting/Misting Fluid

    GreenCut Cutting Fluid / Misting Fluid is a high performance, SAFE, biodegradable coolant used in machining, cutting, grinding, drilling and tapping of all metals. GreenCut Cutting Fluid / Misting Fluid belongs to our All-SAFETM Product Line.

    By LubeCorp Manufacturing Inc. based in Calgary, ALBERTA (CANADA).

  • Vanguard - Steel Tooth Drill Bits

    Increase ROP using a superior roller cone drill bit cutting structure.Designed for soft-formation aggressive drilling, Vanguard Steel Tooth™ roller cone drill bits are setting new performance benchmarks. Operators are recording significant ROP gains with more footage and less trips using our improved steel tooth cutting structure that ...

    By Baker Hughes, a GE company based in Houston, TEXAS (USA). from Steel Tooth Drill Bits Product line

  • Worldcon - Cluster Hammer Drilling

    Cutting Large diameter holes in hard rock can be a challenge. Rock socketing is a big problem faced by many piling contractors. The advance engineering in drills provide a cost effective solution for drilling and excavation requirements upto 120 Inch in diameter. Hammer fitted with 7,875 inch bits are positioned in a specially designed grid to ...

    By Worldcon Technologies Pvt. Ltd. based in Hyderabad, INDIA. from Cluster Hammer Drilling Product line

  • Synova - Model MCS 500 - Metal Cutting Systems

    The MCS 500 in Makino’s machine platform offers a precise XYZ stage, a large sturdy mounting table and a cast iron machine frame. With its simultaneous 5 axes function is specifically designed for 3D machining needs and drilling in industrial gas turbine and jet engine components.

    By Synova S.A. based in Duillier (Nyon), SWITZERLAND. from Metal Cutting Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you