drilling sludge equipment

During drilling operations huge amounts of oil sludge, drill cuttings and oil contaminated soils are produced. Often these wastes are stored near the drilling rig for many years and finally have to be treated and/or disposed of professionally. The latest development at econ industries is an environmentally friendly, energy self-sufficient and very ...

By econ industries services GmbH based in Starnberg, GERMANY. from VacuDry Vacuum Thermal Desorption Technology Product line

The units of the MC are modular systems that are mounted on an open frame or standard shipping containers that allow for working offline and having the opportunity of mobile transport to the venue of the required range of works. Depending on the configuration, they can perform the following types of separation: separation of solids from liquids ...

By NPO Dekanter, LLC based in Domodedovo, RUSSIA. from Dekanters and Separators Product line

Diesel driven, vacuum assisted centrifugal pump. Designed for pumping drilling sludges and bentonite.

By BBA Pumps based in Doetinchem, NETHERLANDS. from BV Series - Sludge and Bentonite Pumps Product line

Mobile Thermal Destruction plants Factor-500 (also called as TDP-500) are intended for thermal utilization of oil slimes with extremely high content of mechanical impurity, oil-contaminated soil, drill sludge, oily wastes formed at emergency leaks of oil and oil products, and other loose and pastelike wastes. These plants have no analogs in the ...

By NPO Dekanter, LLC based in Domodedovo, RUSSIA.

We have experience with Sharples, Tomoe, AlfaLaval and Pieralisi centrifuge systems in a variety of sludge and drilling mud dewatering applications. Our trailer-mounted units can handle up to 250 usgpm of feed and meet US and Canadian DOT requirements for travel without permit.

By Aquen USA, LLC based in Salt Lake City, UTAH (USA).

Input material: oil based drilling mud, oil sludge, crude oil, waste engine oil, asphalt, etc. Output products: 75% Shale sand, 15% combustible gas, 10% fuel oil. Material of reactor: Q345R Boiler plate/SS310/310S+Q345R. Capacity/D:20 Tons to 50 tons. Reactor thickness: 14mm/16mm/18mm. Cooling system:Integrated condensing system. Machine type: ...

By Xinxiang Huayin Renewable Energy Equipment co. Ltd based in Xinxiang, CHINA. from Turn-key Project Product line

Tungsten Hard Scraps (Drills/Endmills, Inserts, Dies). Tungsten Soft Scraps (Sludges).

By Orion Metal Trade Ltd (OMT) based in Sheffield, UNITED KINGDOM.

Sludge vacuum pump, also named as solids transfer pump. It is a type of pneumatic pump that sucks the material with vacuum produced by air operation, and then converts to positive pressure for discharging. Most of the solids, sludge and liquid could be transferred by using this pump. With special structure design of no rotating parts in the ...

By Hebei GN Separation and Conveying Equipment Co.,Ltd based in Langfang, CHINA.

Active Screen Area: 6m2. High speed provides more screening probability. High amplitude provides higher segregation. Slope to be adapted to each application. Fines are usually materials less than 1mm up to 3mm. Cutsizes less than 30µm to 500µm.

By Dynamic Screening Systems Ltd (DSS) based in Pettigo, IRELAND.

Our products the NB、NBZ series pumps are single-suction、single-stage cantilever horizontal centrifugal pumps,They are strickly followed to Q1610303—J71.011—2000 standard. These type pumps are mainly used to suck sand from bottom of rivers and lakes,also for department of metallurgy、mine、building ...

By Jintan Wang-da Sprinker Co. Ltd. based in CHINA.

The specially developed MAT decanter centrifuge for separation of fine, mineral solids from slurries and sludges.

By BAUER MAT Slurry Handling Systems - BAUER Group based in Immenstadt - Seifen, GERMANY. from Separation Technology Product line

MACRO-FILL is a granular, advanced super-absorbent material that rapidly absorbs and retains large volumes of water from aqueous solutions. MACRO-FILL may absorb up to 300 times its weight in freshwater while expanding less than 5% in total volume.

By CETCO based in Kings Norton, UNITED KINGDOM. from Drilling Products - Polymers & Additives Product line

SumpSolution is available in liquid or granules. The formulated blends of surface active ingredients were designed to flocculate oil and suspended solids from the sludge bed in drilling sumps and to replenish the [COD] Chemical Oxygen Demand rapidly.

By EcoDynamics Pty Ltd based in Chamdor, SOUTH AFRICA.

The Triton Kraken Series vacuum loading pressure discharge system was designed for those applications when loading while under vacuum is necessary. This high-performance system excels under the most extreme conditions. These pumps feature closed loop hydraulic systems, solid state cycle control and twin shift cylinders loaded by the 2000 cfm ...

By Triton Industries based in Lottie, LOUISIANA (USA).

Blufloc Polyacrylamide Emulsion series  , have Anionic Polyacrylamide Emulsion and   Catio nic Polyacrylamide Emulsion types. Those are water in oil solvent type, water-soluble with high weight and very high charge density .  The mainses are as flocculants in water treatment and mineral processing ; drainage and retention aids ...

By Yixing Bluwat Chemicals Co., Ltd. based in Yixing, CHINA. from Paper Chemicals Product line

The RSL Jetpump Suction Dredger has been specifically designed to be utilised within the Inspection and Light Work Remotely Operated Vehicle systems. The RSL Jetpump can be permanently mounted to a vehicle or can be skid mounted to be incorporated within the size constraints of the Adaptable Seaker System that is deployed within Sellafield FGMSP. ...

By Rovtech Solutions Ltd. based in Barrow-in-Furness, UNITED KINGDOM. from Remotely Operated Vehicle Product line

CentriTech designes and builds customised process line and systems around centrifuges: Olive Oil process lines, Avocado Oil process lines, Coconut Oil process lines, Fish Oil process lines. Sludge & Slurry Dewatering Systems for Drilling, Tunneling, Mining / Quarries Skid mounted or Container/Trailer installed.

By CentriTech Pty Ltd based in Laverton North, AUSTRALIA.

The Swallowglide is a solids handling end suction pump, specifically designed for sewage, effluent and screened sewage. Robust design and features developed over years of running experience make the CydeUnion Pumps Swallowglide a highly reliable pump with hundreds of installations globally.

By ClydeUnion Pumps - an SPX Corporation brand based in Glasgow, UNITED KINGDOM. from Single and Two Stage Pumps Product line

Our modern mobile sludge dewatering equipment enables us to offer customized tailor made technology and solutions for any application. We have the right equipment and all necessary know-how for each such application. Continously rising disposal costs mandate maximum volume reduction for each sludge dewatering project.

By Mobile Schlammentwässerung Rüdiger Kümmel GmbH based in Homburg, GERMANY.

Dewatering Filter Liners from HQN enable the liquid and solid separation of various sludge waste. Whether utilizing a dewatering container or sludge box, a modified roll-off, or any other custom container (such as a dewatering hopper), HQN has the solution for all your dewatering needs.

By HQN Industrial Fabrics based in Corunna, ONTARIO (CANADA).