drinking water pipe equipment available in Afghanistan

  • Showcase

    FlushInspect - Drinking Water Network Systems

    Determining the necessity to flush a drinking water network systems. Both particles contained in drinking water and corrosion on unprotected metal pipes cause sediments. One essential measure to assure a specified drinking water quality level is to remove such sediments whenever the pipe condition requires such maintenance (flushing intervals ...

    By F.A.S.T. GmbH based in Langenbrettach, GERMANY. from Drinking Water Network Systems Product line

  • Premium

    Etaniv - Water Treatment Systems

    Water treatment is a wide variety of technological solutions. Etaniv is offering solutions for water treatment such as water desalination, Activated carbon filtering and more advanced technologies. We design and construct our systems to comply with the highest standards. We provide process design and detailed design and manufacture complete ...

    By Etaniv B.Y ltd based in Bazra, ISRAEL.

  • Premium

    Commercial Water Filtration Systems Solutions

    Genesis Water Technologies is dedicated to providing sustainable, specialized commercial water filtration systems for drinking water, process water and water reuse/water recycling applications for commercial, industrial and municipal clients worldwide. Water filtration systems are especially important for commercial, industrial and municipal ...

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA). from Commercial Water Filtration Systems Solutions Product line

  • Premium

    Lokal - Model 300 - Leakage Detection System

    The multifunctional F.A.S.T.-LOKAL 300 leakage detection system is applied to detect leakages (correlation and geophone) on drinking-water networks and to trace out pipelines. Simple operational handling enables even unskilled operators succesfully to locate leakages. The pressurized medium inside the pipe generates a leakage-borne noise at the ...

    By F.A.S.T. GmbH based in Langenbrettach, GERMANY. from Leakage Detection System Product line

  • Premium

    NoMonia - Biological Filtration Systems

    Ammonia is an increasing concern for many communities throughout North America. While it is currently unregulated by the USEPA, the World Health Organization (WHO) set a recommended maximum contaminant level of 0.2 mg/L in drinking water. Concerns, however, related to water contaminated by ammonia should not be taken lightly. If ammonia-generated ...

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA). from Biological Filtration Systems Product line

  • Premium

    LMP 307 - Model LMP 307 - Hydrostatic Level Probe LMP 307

    The stainless steel probe LMP 307 is designed for continuous level measurement in water and clean or waste fluids. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability.Features:- nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O- accuracy: 0.1 % / 0.25 % / 0.35 % ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Wavin - Model Tigris K1 and Tigris M1 - Press-fit

    When carrying drinking water, the pipe is only as good as the joint. Wavin offers a complete range of reliable, corrosion and encrustation-resistant plastic press fittings and pipes between 16-63 mm. Our Tigris K1 PPSU range delivers on quality, durability and value. Choose Tigris M1 when you need a metal press-fit system. ...

    By Wavin based in Zwolle, NETHERLANDS. from Press-fit Product line

  • Starline - Model 1000 - Drinking Water Pipelines

    The starline 1000-technology is for the trenchless rehabilitation of underground drinking water distribution and transport pipes using fabric hose relining. It is designed for a distribution system with a normal operating pressure of up to 10 bar. The old pipeline is relined with an ageing-resistant fabric hose.

    By KARL WEISS Technologies GmbH based in Berlin, GERMANY. from Drinking Water Pipelines Product line

  • A.YITE - Model GE-310 - FDA & NSF Plastic Flow Switch

    GE-310 FDA Potable Drinking Water Flow Switch is produced by POM plastic material, have a small pipe size as DN8, NPT1/4', BSP1/4'. The matrial is according to FDA & NSF Standard, could be used in RO instrument, Sea Water Instrument, Chemical Water Instrument, dinking water system

    By A.YITE Technology based in Shanghai, CHINA.

  • RT Solutions - Model NC15 to 300S - Drinking Water Chloinator

    RT Solutions water Chlorinator system needs salt, water and power to produce sodium hypo chlorite (liquid chlorine), Which can be used for disinfection of water to kill bacteria, viruses, and other germs. It also prevents the algae and scale formations in tanks and pipes.

    By RT Solutions Pte Ltd based in SINGAPORE.

  • ItN - Connected Filtration Towers

    The modular and compact design of the Connected Filtration Towers lead to a very small footprint. The Connected Filtration Towers consist of a variable numbers of Filtration Modules per Filtration Tower and a variable number of Filtration Towers per connected unit. They also come with an integrated air scouring system, filtered water & ...

  • FRANK - Bends Formed Out Of Pipe

    We manufacture rigid pipe bends with tight tolerances made of PE 100 pipes. These pipe have been tried-and-tested in gas and drinking water supply and meet the high demands of the DVGW (German Association for Gas and Water Applications) for the transport of gas and drinking water.

    By FRANK GMBH based in Mörfelden-Walldorf, GERMANY. from Bends Formed Out Of Pipe Product line

  • Casing (Protective) Pipes

    Used as a casing (protective) pipe when drilling drinking or service water pipeline wells. Casing pipes of 125, 160 mm diameter are recommended for use. Pipes are manufactured in segments 13 m each, jointed by screw joints or casing collars with rubber seal rings preventing the ingress of soil and water into the well.

    By Planet Plastic LLC based in Kyiv Region, UKRAINE. from Casing (Protective) Pipes Product line

  • Polyethylene Pressure Pipes for Water

    Polyethylene pressure pipes for cold water supply and water disposal are used for construction and repair of pipelines transporting household and drinking water, as well as other liquids and gases, to which polyethylene is chemically resistant. The pipes are produced according to DSTU B V.2.7-151-2008 of polyethylene class PE 100, with the ...

    By Planet Plastic LLC based in Kyiv Region, UKRAINE. from Polyethylene Pressure Pipes for Water Product line

  • Model pureliQ:RD - Backwash Filters

    The backwash filter pureliQ:RD is designed for the filtration of drinking and industrial water. It may be used in the pressure as well as in the negative pressure range. A backwash, however, can only be performed if the filter is used in the pressure range. Solid substances, such as rust flakes or sand grains, may cause serious corrosion damage to ...

    By Grünbeck Wasseraufbereitung GmbH based in Hoechstaedt a.d. Donau, GERMANY. from Backwash Filters Product line

  • BWT - Model DN 65 – DN 80 - Backwash Filter

    The BWT INFINITY AP DN 65 – DN 80 backwash filter filters drinking and mains water to protect the pipes and water conduit systems connected to them. The Multipur AP is fully self-cleaning and also has a differential pressure control. If the filter element is already contaminated prior to the scheduled backwash interval, the differential ...

    By Best Water Technology - BWT Wassertechnik GmbH based in Mondsee, AUSTRIA. from Backwash Filter Product line

  • Starline - Model HPL-W - Drinking Water Transport Pipelines

    Our starline HPL-W technology is used for the rehabilitation of drinking water transport pipelines and long distance pipelines. The fabric hose and adhesive are tested for pipes with a diameter of DN 100 up to DN 600 and with maximum operating pressures of 40 bar. Up to eight hours processing time allow very long sections to be rehabilitated. No ...

    By KARL WEISS Technologies GmbH based in Berlin, GERMANY. from Drinking Water Transport Pipelines Product line

  • Neptune Benson - Model ETS-SX - Ultraviolet Disinfection Reactors

    The Neptune Benson ETS-SX range of products offer the highest performance inline medium pressure UV disinfection reactors designed for applications with larger flows and specifically drinking water quality. The compact system has been designed for the simplest installation into any pipe work system. Most models have been validated per rigorous ...

    By Neptune Benson - an Evoqua Water Technologies Brand based in Coventry, RHODE ISLAND (USA). from Ultraviolet Disinfection Reactors Product line

  • HDPE Pipeing ( High Density Polyethylene Pipe ) Systems

    HDPE Pipe, known as HDPE 100 Pipe (High Density Polyethylene Pipe) and HDPE 80 Pipe used in many projects for potable water, such as pressure water, liquid and gas delivery.. Since 1955, HDPE pipe with all developed countries began to be used in pressurized water projects and nowadays such as old concrete, asbestos pipes removing infrastructure in ...

    By Zeep Construction Co based in Söğütözü, TURKEY.

  • Model HMF Series - Horizontal Mixed Flow Pumps

    Fairbanks Nijhuis mixed flow pumps function as a compromise between radial and axial flow pumps. They operate at higher pressures than axial flow pumps while delivering higher capacities than radial flow pumps. Available in horizontal and vertical executions with a variety of mounting arrangements and nozzle positions to suit most pipe ...

    By Pentair Fairbanks Nijhuis based in Kansas City, KANSAS (USA). from Horizontal Mixed Flow Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you