Only show results available in Connecticut? Ok

dry dust collection equipment

  • Premium

    Graphite Lubricant Aerosol Spray - 12 Cans/Case

    Aerosol Graphite Lubricant; This high temperature, high grade dry graphite lubricant aerosol is designed to stop friction and protect high use equipment from rust and corrosion. Graphite Lubricant is a druable, heavy duty lubricant that can withstand extreme temperature fluctuations from -100°F up to 800°F. This dry lubricant will not ...

    By Interstate Products Inc/ Interstate Products based in Sarasota, FLORIDA (USA). from Aerosols - Lubricants & Penetrants Product line

  • Pulse Dust Removal Equipment

    Dust removal high efficiency, can capture more than 0.3nm dust, dust containing gas purification to 15mg / m3 or less. Less ancillary equipment, save investment, technical requirements are not as high electricity precipitator. Electric dust capture can be difficult to recycle dust; and to a certain extent can collection nitration, sulphur ...

    By Jiangxi Mingxin Metallurgy Equipment Co., Ltd based in Shicheng County, CHINA. from Dedust machine Product line

  • Electrostatic Precipitators And Baghouses (Fabric Filters)

    Electrostatic Precipitators and Baghouses (fabric filters) are applied for dry dust collection. Each system has unique features and applications. Dust and particulate is removed and reclaimed in the dry state, eliminating water pollution. Ambient offers pre-engineered modular designs for all gas flows with critical components factoryassembled for ...

    By Hydronics Corp./ Ambient Engineering. based in Rocky Hill, NEW JERSEY (USA). from Engineered Emissions Control Systems Product line

  • Diversitech - Dust Control Booth

    Diversitech's dust collection booths offer a simple, customizable, and turnkey solution to handle dust & fume filtration for large work pieces. The EnviroBooth modules (EBMs) serve as the booth’s filtration unit, and comes with a 6 cartridge 4500 CFM. The built-in reverse pulse cleaning system in the dust control booth comes standard, ...

    By Diversitech based in Montreal, QUEBEC (CANADA). from Environmental Booths (Wet & Dry) Product line

  • FMD Dust Collectors

    Fabric / Bag filter type dust collectors are specially used for collecting minute dust particles The dust which is filtered from the gas stream collects on the inside of the bags. It is then removed from the bags by manual / mechanical shaking, or pulse jet cleaning. The fabric bags are made of acrylic polyester, polyester, polyester needle felt, ...

    By FMD AIR CONTROL based in Dahisar (W) Mumbai, INDIA.

  • Anbit - Model ZGYX-415 - Mine Drill Rig

    ZGYX-415 separated DTH surface drill rig is another model of high performance low cost rig of Zhigao for surface mining industry. 415 rig upgrades its tramming components, hydraulic system, feed beam, rotary head & the whole rig chassis based on data collected & analysis of ZGYX-410E application reports by Zhigao R & D department. The ...

    By Anbit Drilling Equipment Co., Ltd. based in Hunnan District, CHINA. from Drilling Rig - Mine Drilling Rig Product line

  • Self Dumping Hopper

    The Self-Dumping Hopper simplifies the disposal of dust captured by cartridge-style dust collection systems. Easier to use than conventional barrels or collection drums, the hopper is offered in two capacities (1 cu. yd. and 2 cu. yd.) and is ideal for a full range of dry dusts, including those that must be reclaimed or recycled after the ...

    By Camfil Air Pollution Control (APC) based in Jonesboro, ARKANSAS (USA). from Accessories Product line

  • Dust Pro - Model 455DR - Dust Collectors

    T&H’s Dust Pro Collection is the ideal solution for dry dust or fume removal. They can be used for light dust, abrasive blasting, heavy loads, and granular dust or fumes. The cartridges mount vertically and are available in a variety of filter choices. This versatility allows for an accurate selection of the media type specific to the ...

    By T & H Industries, Inc. based in DeKalb, ILLINOIS (USA). from Dust Collectors Product line

  • Compact - Model GI - Dust & Material Handling Fans

    New York Blower Compact GI Fans (General Industrial) are designed for low-capacity, low-pressure industrial processes such as dust collection, grinding-booth exhaust, scrubber exhaust, food, drying ovens and paper-trim systems. Compact GI’s feature a choice of aluminum or nickel aluminum bronze cast radial-blade wheels.

    By AirSys Technologies, Inc. based in Calgary, ALBERTA (CANADA). from Fans & Blowers Product line

  • Diversitech - Industrial Paint Booth

    Diversitech’s industrial spray booths offer a customizable finishing enclosure for many spray painting and coating applications. The open face spray booth design allows for easy access in and out of the paint booth. The booth generates a cross-draft airflow pattern, pulling overspray into the backdraft hood equipped with paint arrestor ...

    By Diversitech based in Montreal, QUEBEC (CANADA). from Environmental Booths (Wet & Dry) Product line

  • AMBOSO - Cyclones System

    These cyclone separators are suitable only for dusts with specific gravity greater than 300 kg/m3 with fairly coarse particles (more than 10 micron for dusts with specific gravity greater than 1000-1500 kg/m3 and more than 50 micron for dusts specific gravity exceeding 500 kg/m3), present in the air in fairly high concentrations (a few grams per ...

    By Ventilazione Industriale Srl based in Lissone (MB), ITALY.

  • NYB - Model GI - Compact Fans

    New York Blower Compact GI Fans (General Industrial) are designed for low-capacity, low-pressure industrial processes such as dust collection, grinding-booth exhaust, scrubber exhaust, food, drying ovens and paper-trim systems. Compact GI’s feature a choice of aluminum or nickel aluminum bronze cast radial-blade wheels.

    By The New York Blower Company based in Willowbrook, ILLINOIS (USA). from Material Handling Centrifugal Fans Product line

  • Meyer - Model HDX - Heavy Duty Extra-Tough Drop-Thru Rotary Airlock Valves

    The HDX Heavy Duty Extra-Tough Drop-Thru rotary airlock valves are designed to withstand high temperatures and pressure differentials up to 22 psi. This legendary design sets the standard by which all others in the industry are measured. It offers the heaviest gauge rotor vane stock of any competing product, extra thick endplates, flanges and ...

    By Wm. W. Meyer & Sons, Inc. based in Libertyville, ILLINOIS (USA). from Rotary Airlock Valve & Feeder Products Product line

  • Shaker Cartridge Dust Collector

    In order to apply to small air volume and intermittent dust collections, our company developed a shaker cleaning cartridge dust collector. Compared to pulse jet clean cartridge collectors, the shaker cartridge collectors are much more simple and don’t need compressed air for cleaning, greatly reducing the purchase and operation cost. For ...

    By Suzhou Glorair Purifying Equipment Co., Ltd. based in Zhangjiagang City, CHINA. from Cartridge Dust Collectors Product line

  • Dry Systems

    The Norchem Powdercat combines high-impact mixing with high-velocity hydraulic processing to deliver the very highest quality of aqueous dispersions. Whether you use granular, flake, bead, super-fine dry polymer powder, or optional liquid polymer, the Powdercat's multi-stage processing module provides maximum particle separation and wetting to ...

    By Norchem Industries based in Mokena, ILLINOIS (USA).

  • Canister Filters

    Canister filters are pleated elements used for dust collection. Normally they are larger in diameter, and taller than a blower intake or a pleated dust bag. Canister filters usually have metal end caps, and have an inner or outer core made of galvanized, or stainless (expanded metal or helix) for support. Some will refer to a canister filter using ...

    By FilterPro based in East Lynne, MISSOURI (USA).

  • ATEX - Blowers

    The versatility of side channel blowers ensures that they are often used as ATEX blowers in applications with a certain degree of explosion risk. Installations with ATEX blowers are specifically designed to prevent any source of ignition. Through risk assessment according to ATEX 153, the user determines the ATEX zones for the environment and the ...

    By Sjerp & Jongeneel B.V. based in Zoetermeer, NETHERLANDS. from Fans & Pumps Product line

  • Carbon Black Granulation Equipment

    The size of carbon black pellet is adjustable,the particle conversion rate is 100%. The whole process in sealed condition. Equip with unique drying equipment and sealing device. No dust leakage,high environmental protection degree. Computer programmed control conveying ratio, easy to operate. Continuous production, electronic quantitative packing, ...

  • Meyer - Model HDXP - Heavy-Duty - NFPA Valve

    The Meyer HDXP Heavy-Duty, NFPA design valves are custom applied units to your specific application. Meyer engineers review the application and evaluate the design based on KST values for the material, temperature, pressure and ambient conditions. Units can be built in cast iron, stainless and cast steel to match the specific NFPA requirements. ...

    By Wm. W. Meyer & Sons, Inc. based in Libertyville, ILLINOIS (USA). from Rotary Airlock Valve & Feeder Products Product line

  • Meyer - Model HDSE - Heavy Duty Side Entry Drop-Thru Rotary Airlock Valves

    The HDSE Heavy Duty Side Entry Drop-Thru rotary airlock valves are designed for applications involving relatively large particles that cannot be reduced by the shearing action between the rotor blades and the housing at the inlet. They are also suitable for applications where small fines produced by the shearing action could cause damage to the ...

    By Wm. W. Meyer & Sons, Inc. based in Libertyville, ILLINOIS (USA). from Rotary Airlock Valve & Feeder Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you