Only show results in Connecticut? Ok

dust meter equipment

  • Premium

    New Cosmos - Model SDM-72 - Grease Steel Dust Meter

    The New Cosmos SDM-72 grease steel dust meter employs a magnetic balance type electromagnet induction method as the measuring principle, and is a useful simplified diagnosis tool for inspecting the abrasion status of bearings and gears.

    By DOD Technologies Inc based in Cary, ILLINOIS (USA). from Gas Detectors Product line

  • Premium

    New Cosmos - Model SDM-73 - Oil Steel Dust Meter

    The SDM-73 enables simple diagnosis and trend monitoring of the wear condition of bearings, gears, cylinders, etc. by checking steel dust concentration in lubricating oil. Enables simple diagnosis and trend monitoring of the wear condition of bearings, gears, cylinders, etc. by checking steel dust concentration in lubricating oil.

    By DOD Technologies Inc based in Cary, ILLINOIS (USA). from Gas Detectors Product line

  • Emiotest - Model 3114 - Gravimetric Dust Meter

    Automatic dust meter EMIOTEST 3114, in its innovative technical solution, is a portable device designed to perform, in closed channels, periodic measurements of dust concentration in the flue gases and a dust mass stream (e.g. in the exhaust) to define the emission of dust into the atmosphere. The measurement method is based on the isokinetic ...

    By E.M.I.O. Innovation-Implementation Enterprise based in Wrocław, POLAND.

  • Premium

    Kanomax Piezobalance - Model 3521/3522 - Respirable Aerosol Mass Dust Monitor

    Respirable Aerosol Mass Monitor while conventional dust meters “count” particulates, the Piezobalance dust meter “weighs” the mass concentration of particulates eliminating the need for a gravimetric sampling.

    By Kanomax USA, Inc. based in Andover, NEW JERSEY (USA). from Dust Monitors - Portable Dust Monitor Product line

  • Premium

    MB Crusher - Model BF60.1 S4 - Crusher Bucket

    The BF60.1 crusher bucket, despite its compact size and reduced weight, is sturdy and resistant. Agile and powerful, it is MB’s solution for smallscale sites. Its reduced weight and ease of installation allow for access to problematic and difficult-to-reach sites such as those in historical urban centres or in high altitude mountain areas.

    By MB Crusher based in Fara Vicentino, ITALY. from Crusher Bucket Product line

  • Premium

    MB Crusher - Model BF70.2 S4 - Crusher Bucket

    When a combination of high performance and reduced size and weight is required, the BF70.2 crusher bucket comes into play. Small/mediumscale crushing work and urban sites are the ideal areas of application for this highly-resourceful machine.

    By MB Crusher based in Fara Vicentino, ITALY. from Crusher Bucket Product line

  • Premium

    MB Crusher - Model MB-L160 S2 - Crusher Bucket

    The perfect combination of efficiency and mobility, designed to meet the needs of skid loaders and backhoes while maintaining the power and productivity of MB products. The MB-L160 S2 crusher bucket is suitable for backhoes, loaders and telehandlers between 4,5 and 10 Ton. The compact size is efficient and easy to use.

    By MB Crusher based in Fara Vicentino, ITALY. from Crusher Bucket Product line

  • Premium

    MB Crusher - Model BF90.3 S4 - Crusher Bucket

    Produced and patented by MB in 2001, the BF90.3 was the first crusher bucket to be made in the world. Designed to eliminate material friction in the loading phase and to resist even the most difficult conditions on site. The BF90.3 is extremely compact and versatile and has been improved and strengthened over the years. Suitable for all crushing ...

    By MB Crusher based in Fara Vicentino, ITALY. from Crusher Bucket Product line

  • Premium

    MB Crusher - Model MB-L140 S2 - Crusher Bucket

    Small, compact and easy to handle, despite its small size this machine offers the highest standards of productivity and quality. The MB-L140 S2 crusher bucket is suitable for backhoes, loaders and telehandlers between 3 and 8 Ton. This bucket is the perfect combination of versatility, performance, and practicality.

    By MB Crusher based in Fara Vicentino, ITALY. from Crusher Bucket Product line

  • Premium

    MB Crusher - Model BF80.3 S4 - Crusher Bucket

    The BF80.3 crusher bucket is compact, versatile and ideal for operations of crushing and recycling, both outside and in enclosed spaces. Its reduced weight and size eases transportation, making it rapid and economical, while maintaining high levels of efficiency and productivity.

    By MB Crusher based in Fara Vicentino, ITALY. from Crusher Bucket Product line

  • Premium

    MB Crusher - Model MB-L120 S2 - Crusher Bucket

    Small but packed with high performance. It meets the need that arises in small yards and limited spaces. The MB-L120 S2 crusher bucket is suitable for backhoes, loaders and telehandlers between 2,8 and 7 Ton. Easy to carry, compact, handy, easy to use, and low maintenance.

    By MB Crusher based in Fara Vicentino, ITALY. from Crusher Bucket Product line

  • Premium

    MB Crusher - Model MB-C50 S2 - Crusher Bucket

    The MB-C50 is the smallest crusher bucket in the MB product line, weighing less than one Ton and designed to work on excavators starting from 5 Ton. It is suitable for mini excavators and great for small crushing jobs. Due to its reduced size and weight, the MB-C50 has proven to be particularly useful in landscaping and restricted areas, ensuring ...

    By MB Crusher based in Fara Vicentino, ITALY. from Crusher Bucket Product line

  • Premium

    MB Crusher - Model MB-L200 S2 - Crusher Bucket

    Made with the same materials and technology as the full line of MB crusher buckets, the MB-L200 was designed on the basis of specific work requirements for skid steers and backhoes. MB-L200 crusher is suitable for skid steers starting from 13,250 lbs and backhoe between 15,450 to 22,100 lb. Changing the shape of the crusher does not affect the ...

    By MB Crusher based in Fara Vicentino, ITALY. from Crusher Bucket Product line

  • Coal Dust Explosibility Meter (CDEM)

    Measures percent rock dust in coal mine dust samples, Portable direct-reading instrument, Instantaneous explosibility indication, Easy-to-read digital display, MSHA approved (18-A 110002-0)

    By Sensidyne Industrial Health and Safety based in St. Petersburg, FLORIDA (USA).

  • Premium

    MB Crusher - Model BF120.4 S4 - Crusher Bucket

    The BF120.4 crusher bucket has been created to satisfy specific requirements of crushing in quarries,  landfills and for all operations regarding the recycling of aggregates. It is a versatile and powerful machine which, in the space of just a few years, has established a strong presence in the  sector of crushing in large-scale urban ...

    By MB Crusher based in Fara Vicentino, ITALY. from Crusher Bucket Product line

  • Premium

    MB Crusher - Model MB-S18 S4 - Screening Bucket

    The MB-S18 screening bucket has been designed for medium and large-scale contexts that require high performance and large-scale production. This model is fitted with a metal separator that allows the rapid and efficient separation of iron from the material screened, as well as a spray for the reduction of dust resulting ...

    By MB Crusher based in Fara Vicentino, ITALY. from Screening Buckets Product line

  • Premium

    Gecko - Model 4510-ST - Chimney Camera

    The Gecko 4510-ST Chimney Camera is a premium, high end color inspection camera designed specifically for chimney, duct and flue inspections. It can be either lowered down from the top, or runt up from the bottom using a fibreglass rod. This is great for inspections in extreme soot and other debris. The Gecko Chimney is manufactured in Germany, ...

    By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA). from Borescope Cameras - Chimney Cameras Product line

  • Premium

    ProMinent Tomal - Metering System for Powdered Activated Carbon (PAC)

    5-50 kg/h of dry PAC with a re-dilution of 3-5 m3/h and a final concentration of max. 1%. Conventional waste water treatment cannot adequately remove trace elements, such as medication or cosmetic residue from the waste water. This is particularly effective using the complete system for the precise metering of powdered active carbon (PAC).

    By ProMinent GmbH based in Heidelberg, GERMANY. from Metering Systems for Solids Product line

  • E.M.I.O - Model SA-KW Type - Cooled Aspiration Probe

    SP-kw type probe included in EMIOTEST 2598 dust meter set, allows collection of dust samples fromthe stream of cool exhaust gases from technological processes in order to determine the content ofpolycyclic aromatic hydrocarbons (PAHs).

    By E.M.I.O. Innovation-Implementation Enterprise based in Wrocław, POLAND.

  • E.M.I.O - Model Type S - Aspiration Segmented Unheated Velocity Probes

    Sectional, unheated, aspiration velocity probes type 'S', included in dust meter EMIOTEST 2598 set, allow thecollection of dust samples from the stream of waste gases from technological processes and technical operations inorder to determine the concentration and mass flow of dust. The probe consists of selected head connected to aselected ...

    By E.M.I.O. Innovation-Implementation Enterprise based in Wrocław, POLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you