We couldn't find any dust monitor equipment suppliers or service providers located in Albania

Here is a list of equipment results with suppliers serving Albania

dust monitor equipment available in Albania

  • Premium

    EnergyTech - Model 301 - Tribo Electric Dust Monitor

    The EnergyTech 301 is a low cost dust monitor using well-proven tribo-electric technology providing accurate and rapid results. The EnergyTech 301 requires no critical alignment and has no optical surfaces to keep clean. The sensor is easy to install, requiring only a simple probe and is ideal for small duct sizes. Minimal maintenance is required, ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Tribo Electric Dust Monitor Product line

  • Premium

    Land - Model 4500 MkIII - Compliance Opacity and Dust Monitor

    A high-specification opacity and dust monitor meeting global compliance standards for monitoring combustion processes. 4500 MkIII is the most accurate and reliable continuous opacity monitor available, combining AMETEK Land’s ground-breaking innovation and simple design for precise, problem-free operation. Unmatched, class-leading accuracy ...

    By AMETEK Land based in Dronfield, UNITED KINGDOM. from Compliance Opacity and Dust Monitor Product line

  • Premium

    Codel - Model DCEM1001 - Single Pass Opacity/Dust Monitor

    The D-CEM1000/1001  Opacity Monitors consist of a visible light transmitter and receiver arrangement with digital data processing in a local display unit. The monitors can display data in either opacity, extinction or dust density in mg/m3 or normalised dust density in mg/Nm3. The D-CEM1001 possesses four analogue inputs for normalisation ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Single Pass Opacity/Dust Monitor Product line

  • Premium

    StakGard - Tribo Electric Indicative Dust Monitor

    The Stakgard continuous dust monitor uses the well-proven tribo-electric effect to directly measure mass particulate concentration by sensing the frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and present it to the operator via a unique modulating LED display. StakGard ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Tribo Electric Indicative Dust Monitor Product line

  • Premium

    ENVEA (ex Environnement S.A) - Model PCME QAL 991 - Dust / Particulates Monitor System

    Suitable for industrial processes controlled with dry scrubbing and high efficiency bag filtration. The PCME QAL 991 uses unique ElectroDynamic™ Probe Electrification technology, which outperforms alternative probe electrification technologies by extracting a specific frequency band of the induced AC signal. This patented feature ensures ...

    By ENVEA based in Poissy, FRANCE. from Dust / Particulates Monitor System Product line

  • Premium

    Codel - Model DCEM2000 - Dual Pass Opacity/Dust Monitor (Integrated Version)

    The DCEM2000 is a dual-pass transmissometer configured for the continuous measurement of opacity and dust in flue gases. Opacity, Dust mg/m2, Normalised Dust mg/Nm2. The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Dual Pass Opacity/Dust Monitor (Integrated Version) Product line

  • Premium

    Codel - Model DCEM1000 - Single Pass Opacity/Dust Monitor

    The D-CEM1000/1001  Opacity Monitors consist of a visible light transmitter and receiver arrangement with digital data processing in a local display unit. The monitors can display data in either opacity, extinction or dust density in mg/m3 or normalised dust density in mg/Nm3. The D-CEM1001 possesses four analogue inputs for normalisation ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Single Pass Opacity/Dust Monitor Product line

  • Premium

    Model 4200+ - Non-Compliance Opacity and Dust Monitor

    Dust and opacity monitor, designed for measuring dust emission concentrations in combustion applications where automatic calibration checks are not required. The 4200+ is the most accurate and reliable monitor available for dust and opacity measurements in combustion applications not requiring automatic calibration checks and regulatory ...

    By AMETEK Land based in Dronfield, UNITED KINGDOM. from Non-Compliance Opacity and Dust Monitor Product line

  • Premium

    Codel - Model DCEM2100 - Dual Pass Opacity / Dust Monitor

    The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Dual Pass Opacity / Dust Monitor Product line

  • Premium

    Land - Model 4200 - Non-Compliance Dust Emissions Monitor

    Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a wide range of ...

    By AMETEK Land based in Dronfield, UNITED KINGDOM. from Non-Compliance Dust Emissions Monitor Product line

  • Sintrol - Model S304 - Dust Monitor

    Emissions monitor that can be calibrated to give mg/m3 output. For applications requiring absolute value measurements of dust concentrations, the S304 can be calibrated to give the user a mg/m3 output.  Once calibrated, this dust monitor helps plant operators know exactly how much dust is passing through the stack or outlet duct of their ...

    By Sintrol Oy based in Helsinki, FINLAND. from Dust Monitor Product line

  • Model EMS500 - Dust Monitor

    The EMS500 provides continuous, low maintenance, precision measurement of mg/m3(N), Optical Density and Opacity. It is designed for monitoring visible smoke and particulate concentrations in the exhaust gas of industrial combustion or air filtration processes. Operational path length of 2-50 feet.

    By Environmental Monitor Service, Inc. based in Yalesville, CONNECTICUT (USA). from Dust Monitor Product line

  • Model D-R 820F - Dust Monitor

    Extractive dust monitor for wet sample gas to monitor low to medium dust concentrations.

    By Woori Environmental Technology Co,. Ltd based in Suwon-si, SOUTH KOREA. from Dust Monitor Product line

  • Sintrol - Model S305 - Dust Monitor

    TÜV certified stack monitor for official emissions measurements. TÜV certified to meet the EN 14181 (2004) standard, the S305 dust monitor is used for official emissions applications.  The state of the art dust monitor has been used in stack emissions for a number of state owned and private industrial ...

    By Sintrol Oy based in Helsinki, FINLAND. from Dust Monitor Product line

  • Sintrol - Model S303 - Dust Monitor

    Trend monitor with 4-20mA output for continuous dust measurement. Continuous trend monitor that gives plant operators to see the performance of the filtration systems and ducts over a period of time.  Perfect for installation after any filtration system or in common line channels leading into the emissions points of a plant.

    By Sintrol Oy based in Helsinki, FINLAND. from Dust Monitor Product line

  • Sintrol - Model S301 - Dust Monitor

    On/Off Switch for filter leak detection. With two independent alarm relays, Sintrol's S301 allows the end user to identify bag leaks and deterioration of filters.  Using our electric induction measurement principle, the dust monitor can be easily set up within 30 minutes of installation and gives plant operators quick notification of breaches ...

    By Sintrol Oy based in Helsinki, FINLAND. from Dust Monitor Product line

  • Grimm - Model EDM365 - Environmental Dust Monitors

    For a simultaneous measuring of PM , PM and Pm (or TSP) in real-time plus - optionally - rel. humidity, temperature, wind speed, wind direction, precipitation and atm. pressure All data are online to the world wide web.

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA). from Environmental Dust Monitors Product line

  • Kanomax - Model 3443 -  Digital Dust Monitor

    The Kanomax Dust Monitor 3443 is a compact and high quality instrument ensures highly accurate dust measurements via a user-friendly & intuitive interface. Applications include office, school, hospital, manufacturing,laboratory, and other applications where measurement of contaminants is required. It measures particle concentration of PM 10.

    By Kanomax USA, Inc. based in Andover, NEW JERSEY (USA).

  • RACI - Dust monitoring Systems

    Beside performing gravimetrical dust measurements,RACI company is also able to offer its customers contemporary, proven and robust dust monitoringsystems for continuous or discontinuous monitoring with competent and compliance solutions, low costs of ownership, high reliability and availability as well as high quality i.e. ...

    By RACI d.o.o. based in Ljubljana, SLOVENIA. from Dust monitoring Systems Product line

  • ETG - Laser Dust Monitor

    The measuring system is based on the principle of single pass. The beam of light passes through the measurement section only once; the detector Currency weakening of the light beam due to the dust content. The value will be displayed as optical% opacity is on display analog or digital display. The calibration check can be done using optical ...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY. from Laser Dust Monitor Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you