dust monitoring equipment in Finland

  • Sintrol - Model S303 - Dust Monitor

    Trend monitor with 4-20mA output for continuous dust measurement. Continuous trend monitor that gives plant operators to see the performance of the filtration systems and ducts over a period of time.  Perfect for installation after any filtration system or in common line channels leading into the emissions points of a plant.

    By Sintrol Oy based in Helsinki, FINLAND. from Dust Monitor Product line

  • Sintrol - Model S305 - Dust Monitor

    TÜV certified stack monitor for official emissions measurements. TÜV certified to meet the EN 14181 (2004) standard, the S305 dust monitor is used for official emissions applications.  The state of the art dust monitor has been used in stack emissions for a number of state owned and private industrial ...

    By Sintrol Oy based in Helsinki, FINLAND. from Dust Monitor Product line

  • Sintrol - Model S304 - Dust Monitor

    Emissions monitor that can be calibrated to give mg/m3 output. For applications requiring absolute value measurements of dust concentrations, the S304 can be calibrated to give the user a mg/m3 output.  Once calibrated, this dust monitor helps plant operators know exactly how much dust is passing through the stack or outlet duct of their ...

    By Sintrol Oy based in Helsinki, FINLAND. from Dust Monitor Product line

  • Sintrol - Model S301 - Dust Monitor

    On/Off Switch for filter leak detection. With two independent alarm relays, Sintrol's S301 allows the end user to identify bag leaks and deterioration of filters.  Using our electric induction measurement principle, the dust monitor can be easily set up within 30 minutes of installation and gives plant operators quick notification of breaches ...

    By Sintrol Oy based in Helsinki, FINLAND. from Dust Monitor Product line

  • MIP - Model LM-3189 R9PF TLG - Laser Dust Monitor

    LM 3189 R9PF TLG is designed to allow installations in more challenging locations compared to the original LM 3189 version which is the most cost-effective dust monitor model, equipped with a semiconductor laser. It is excellent for measuring medium to long distances (3 - 10 m) and medium high concentrations. (> 25 mg/m3).

    By MIP Electronics Oy based in Kerava, FINLAND.

  • Sintrol - Model E-Spy - Continous Dust Monitor

    As the only probe based dust monitor proven to be a reliable trend monitor after electrostatic precipitators (ESP), the Sintrol ESPY is one of its kind.  With the ability to neutralize the electrostatic field in the outlet duct of an ESP, the ESPY is able to give a trend of relative dust concentrations to help plant operators optimize the use ...

    By Sintrol Oy based in Helsinki, FINLAND. from Continous Dust Monitor Product line

  • MIP - Model LM-3189 - Laser Dust Monitor

    LM 3189 is the most cost-effective dust monitor model, equipped with a semiconductor laser. It is excellent for measuring from medium to long distances ( 3 - 10 m) and from medium to high concentrations ( > 25 mg/m3).

    By MIP Electronics Oy based in Kerava, FINLAND.

  • Dumo - Continuous Dust Monitor

    Continuous dust monitor for trend monitoring in ambient air environments. With increasing demands for workplace health the ability to measure changes in ambient air dust concentration becomes more important by the day. All areas where dust might cause harm to employees or sensitive devices can now be monitored and dust extraction systems operated ...

    By Sintrol Oy based in Helsinki, FINLAND. from Continuous Dust Monitor Product line

  • HORIBA - Model APDA-371 - Ambient Dust Monitor

    The APDA-371 automatically measures and records airborne particulate concentration levels (in milligrams or micrograms per cubic meter), using the industry-proven principle of beta ray attenuation. Thousands of this Dust Analyzer units are currently deployed worldwide, making the unit one of the most successful air monitoring platforms in the ...

    By HORIBA Europe GmbH Office in FINLAND. from Ambient Dust Monitor Product line

  • MIP - Model LM-3086 EPA3 - Dust and Opacity Monitor

    LM 3086 EPA3 offers the new performance standard in opacity/dust monitoring. It fulfills the U.S EPA 40 CFR Appendix B, PS1 requirements and is also approved by TÜV for German 13th BlmSchV and TA Luft.

    By MIP Electronics Oy based in Kerava, FINLAND.

  • MIP - Model LM-3086 SE - Dust and Opacity Monitor

    LM 3086 SE offers the new performance standard in opacity/dust monitoring which is based on the model designed for USA-market and approved by US EPA. LM 3086 SE has TÜV approval for German 13th BlmSchV and TA Luft.

    By MIP Electronics Oy based in Kerava, FINLAND.

  • Wireless Router Dust Monitor

    The Wireless Router Dust monitor is a microprocessor-based unit, equipped with USB, RS485 and Sintrol’s local RF-link connections.The device is designed to manage all Sintrol products connected to Sintrol Network. The Wireless Router has been specifically designed for easy installation and reliable operation.

    By Sintrol Oy based in Helsinki, FINLAND. from Wireless Router Dust Monitor Product line

  • Snifter - Model A2 - Dust Monitor for Broken Bag Detection

    Snifter A2 is an advanced filter leak detector. This dust monitor can be used to monitor the operation of a baghouse and alarm the operator when dust levels increase. Snifter A2 supports Sintrol Network connectivity over USB and RS485 interfaces by default. All parameters and settings are user selectable to best suit custom application needs. This ...

    By Sintrol Oy based in Helsinki, FINLAND. from Dust Monitor for Broken Bag Detection Product line

  • Showcase

    Gasmet - Continuous Mercury Monitoring System (CMM)

    The Gasmet CMM mercury monitoring system can measure the lowest concentrations of total mercury in samples containing high amounts of dust and gases such as SO2, which traditionally have complicated mercury measurement in e.g. installations such as coal fired power plants stations and power plants co-incinerating refuse derived fuels. The Gasmet ...

    By Gasmet Technologies Oy based in Helsinki, FINLAND. from Continuous Mercury Monitoring System (CMM) Product line

  • Showcase

    Codel - Model DCEM2000 - Dual Pass Opacity/Dust Monitor (Integrated Version)

    The DCEM2000 is a dual-pass transmissometer configured for the continuous measurement of opacity and dust in flue gases. Opacity, Dust mg/m2, Normalised Dust mg/Nm2. The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or ...

  • Farr Dust Collector (FDC) Controller

    The Farr Dust Collector (FDC) Controller's flexible design allows it to be adapted to many dust collector configurations. The Timer Control Module will sequentially pulse up to ten outputs in 'On-Demand' mode, based upon the Pressure Switch closure on the Pressure Differential Meter. If more output capability is needed, up to 980 additional ...

    By Camfil Air Pollution Control (APC) Office in ESPOO, FINLAND. from Farr Dust Collector (FDC) Controller Product line

  • Premium

    EnergyTech - Model 301 - Tribo Electric Dust Monitor

    The EnergyTech 301 is a low cost dust monitor using well-proven tribo-electric technology providing accurate and rapid results. The EnergyTech 301 requires no critical alignment and has no optical surfaces to keep clean. The sensor is easy to install, requiring only a simple probe and is ideal for small duct sizes. Minimal maintenance is required, ...

    By Codel International Ltd Distributor in FINLAND. from Tribo Electric Dust Monitor Product line

  • Premium

    Codel - Model DCEM1000 - Single Pass Opacity/Dust Monitor

    The D-CEM1000/1001  Opacity Monitors consist of a visible light transmitter and receiver arrangement with digital data processing in a local display unit. The monitors can display data in either opacity, extinction or dust density in mg/m3 or normalised dust density in mg/Nm3. The D-CEM1001 possesses four analogue inputs for normalisation ...

    By Codel International Ltd Distributor in FINLAND. from Single Pass Opacity/Dust Monitor Product line

  • Premium

    StakGard - Tribo Electric Indicative Dust Monitor

    The Stakgard continuous dust monitor uses the well-proven tribo-electric effect to directly measure mass particulate concentration by sensing the frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and present it to the operator via a unique modulating LED display. StakGard ...

    By Codel International Ltd Distributor in FINLAND. from Tribo Electric Indicative Dust Monitor Product line

  • Premium

    Codel - Model DCEM1001 - Single Pass Opacity/Dust Monitor

    The D-CEM1000/1001  Opacity Monitors consist of a visible light transmitter and receiver arrangement with digital data processing in a local display unit. The monitors can display data in either opacity, extinction or dust density in mg/m3 or normalised dust density in mg/Nm3. The D-CEM1001 possesses four analogue inputs for normalisation ...

    By Codel International Ltd Distributor in FINLAND. from Single Pass Opacity/Dust Monitor Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you