Dust Monitoring Equipment Near San Marino
-
Manufactured by QBit S.r.l.based in ITALY
The measuring principle of our micro-dust sensors is the detection of the scattered light from a collimated laser beam within an interaction chamber. Each sensor consists of the optical chamber and a control ...
-
Manufactured by QBit S.r.l.based in ITALY
LCT-12 Is a Micro-dust measuring station that can be installed indoor or outdoor. It’s completely self standing , and delivers microdust concentrations in a digital (via USB or RS232) and/or analog ( 4-20 mA) format, at an output rate up to 1 measure per second. An autocalibration procedure is carried out at regular time ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
Mobile measuring instrument with scattered light sensor for real-time monitoring of PM2.5 concentrations. The compact and lightweight, hand-held MDM-2 (Mobile Dust Monitor) measures the current PM2.5 concentration at the measuring site in real time. It applies a photometric method using scattered light (nephelometry). A graphical trend ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
Filter monitor for in-situ dust measurement. with separate operating unit. display showing the measured value in mg/m³ or line ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
The fine dust sensor FDS 15 is an optical sensor for continuous measurement and control of fine dust contents. An integrated dust precipitator can be used optionally for the analysis of respirable particle fractions (PM2,5). The determination of the dust content in the FDS 15 is based on the method of scattered light ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
precise air quality and meteorological data in real-time. Our sensor products have been used in fenceline/community monitoring, pollution source screening, wildfire/smoke monitoring, and smart city ...
-
Manufactured by Orion SRLbased in ITALY
The ETL BUS is the new All-In-One air quality monitoring solution designed and manufactured by Unitec, for indicative measurement (Directive 2008/50/EC) and specifically engineered in a box for car or bus roof for 3D environmental ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
The filter controller consists of an isolated probe which is installed in the clean gas channel. The complete electronic is integrated in the probe head. No additional control unit is required. The charge transferred by contact and triboelectric processes is derived as current, converted in the evaluation unit, amplified and provided as norm signal 4 ... 20 mA. Via a limit value detector the ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The SCI-2021 Portable Dust Monitor utilizes state of the art light-scattering principle (near FEM) to measure the mass concentration of particulate matter (PM2.5, PM10, and PM1). When the sampling airflow passes through a uniformly illuminated light sensitive area, the dust particles in the airflow will produce scattered light. Then the ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
Filter monitor for in-situ dust measurement. compact device with display. suitable for the construction of filter monitoring systems. The PFM 13 is a highly sensitive system for continuous, tribo-electric in-situ filter monitoring. Thereby a qualitative monitoring of the exhaust gas is done. Depending on the ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
Filter monitor for in-situ dust measurement compact device display showing the measured value in mg/m³ or in line diagram. The PFM 13 is a highly sensitive system for continuous, tribo-electric in-situ filter monitoring. Thereby a qualitative monitoring of the exhaust gas is done. Depending on the configuration of the device ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
For monitoring dust emissions and detecting effectively damages at filtering precipitators . The device is simple in construction and very user-friendly. The integrated micro-controller allows numerous possibilities to use the PFM 02 Ex as well as a timely monitoring of the dust emissions. Target value calibration: Enter a ...
-
Manufactured by Orion SRLbased in ITALY
The ETL-One is the innovative air quality monitoring solution designed and manufactured by Unitec for indicative measurement (as defined by European Directive ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
The dust concentration measuring device PFM 02 V is used for the continuous measurement of dust contents, especially for the emission measurement according to TI air, 13th, 17th and 27th BImSchV as well as for the dust concentration measurement in process monitorings. Parallel to the dust measurement flow and ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
Filter monitor for in-situ dust measurement. compact device. suitable for the construction of filter monitoring systems. The PFM 13 C is a highly sensitive system for continuous, tribo-electric in-situ filter monitoring. Thereby a qualitative monitoring of the exhaust gas is done. Depending on the configuration ...
-
Manufactured by RTS Instruments Srlbased in ITALY
Monitors, the Gamma head (GAM-01) for the RAM-01NA or RAM-31NA Aerosol Monitors, the RGM and RWM/UWM series of gas and water monitoring units, some unit of the SMU series of smart Gamma Monitors. ...
-
Manufactured by Kanomax USA, Inc.based in USA
This sensor detects particles with a light scattering method, using one light emitter and two light receptors, and discriminates pollen from other particles with two factors: “scattered light intensity” and “degree of ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APDA-371 automatically measures and records airborne particulate concentration levels (in milligrams or micrograms per cubic meter), using the industry-proven principle of beta ray attenuation. Thousands of this Dust Analyzer units are currently deployed worldwide, making the unit one of the most successful air monitoring ...
-
Manufactured by Palas GmbHbased in GERMANY
QAL1 / MCERTS certified real-time fine dust monitors for air quality measurement and regulatory ...
-
Manufactured by Palas GmbHbased in GERMANY
MCERTS certified outdoor air quality monitor for smart city applications, fence line and indoor air quality ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you