dust separation equipment in Denmark

  • Moldow DanSep - Separator Dust

    Moldow's separator, DanSep, separates dust from coarse material where necessary, and handles air volumes up to 50,000 m³/hour in single units. Moldow DanSep forms an integral part of the extraction system in which the waste is removed automatically from the production machines. The coarse material is extracted to the separator and discharged ...

    By Moldow A/S based in Holsted, DENMARK. from Separator Dust Product line

  • Premium

    Eldan - Model WST - Water Separation System

    The Water Separation System is a cost effective solution to recover metal dust and fine wires from the plastic fraction after the metal separation. By using a well-balanced combination of water, table inclination and oscillating movements you will get an almost clean plastic fraction with metal losses as low as 0.2%. The metal fraction will have a ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Water Separation System Product line

  • JKF - Explosion Duct Valves

    The explosion duct valve is used in order to prevent that an explosion in the plant will be channelled back to the production premises and machines. The explosion duct valve is mounted on the duct section between the plant and the source of dust. The explosion duct valve stops explosions that occur in the opposite direction of the normal flow. ...

    By J.K.F. Industrie A/S based in Hadsund, DENMARK. from Explosion Duct Valves Product line

  • KBM - Mini Recycling In-A-Box

    If you need to treat EPS/EPP/EPE/ARCEL pieces so they can be recycled in a production. The only system on the market, where you have a pre-crusher/granulator, a dust separation unit, a cyclone venting and a dust compactor built into one unit. To recycle by replacing new raw material is the best economical way, because you gain up to 80-90% of the ...

    By KBM ApS based in Hilleroed, DENMARK.

  • Premium

    Eldan - Model UP1500 / UP1750 / FP1500 / FP1750 - Aspirators for Tyre Recycling

    The Eldan Aspirators are used in tyre recycling to separate the textile from the rubber granulates and to classify the rubber granules into three sizes and dust.

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Aspirators for Tyre Recycling Product line

  • Monsun - Intake Pit Aspiration System

    The system reduces the dust spillage when using intake pits. More stringent rules in respect of environmental conditions have led to development of the MONSUN Baff Wind System - a dust extraction system for intake hoppers.When unloading in the intake pit the system only opens in the spot where the product falls into the pit while the remaining pit ...

    By Lachenmeier Monsun A/S based in Sønderborg, DENMARK. from Intake Pit Aspiration System Product line

  • JKF - Model Type JA - Spiral Cyclones

    Cyclone type JA is intended for separation of fine grain particles in transport and dust extraction plants. Cyclones are designed for high efficiency. Powder coating corrosion class C3. Legs are non-standard, but available as optional extras. Cleaning door in cone is an optional extra.

    By J.K.F. Industrie A/S based in Hadsund, DENMARK. from Spiral Cyclones Product line

  • JKF - Model Type CS - Spiral Cyclones

    Spiral cyclones type CS are used for air treatment plants in the wood and paper industries and for corn and feed to separate chaff and corn dust in exhaust air from drying and cleaning plants. They are made of rolled and riveted hot-dip galvanised sheet metal, but can be supplied in welded 2 - 3 mm sheet. Type CS-20 is painted in RAL 5010. ...

    By J.K.F. Industrie A/S based in Hadsund, DENMARK. from Spiral Cyclones Product line

  • Hako Hamster 800

    Especially for dust-free cleaning of small to medium-sized areas, Hako is now presenting the Hako Hamster 800. The manually-operated vacuum sweeper has been designed with a robust all-steel chassis and the high sweeping performance for use in the commercial area and by service providers. The equipment features, which can already be classed as ...

    By Hako GmbH Office in Langeskov, DENMARK. from Hako Hamster 800 Product line

  • Premium

    Hughes Safety - Model EXP-65GS - Indoor Unheated Emergency Safety Shower

    Floor mounted drench shower and separate open bowl stainless steel eye/face wash with protective frame. This hand operated floor mounted unheated emergency safety shower and separate eye/face wash each attached to 316L stainless steel hand rails  with integral floor grating, providing extra support to the casualty in the event of an ...

  • Premium

    Hughes Safety - Model EXP-65G - Floor Mounted Indoor Unheated Emergency Safety Shower

    Floor mounted drench shower and separate open bowl stainless steel eye/face wash with protective frame. This hand operated floor mounted unheated emergency safety shower and separate eye/face wash each attached to galvanised mild steel hand rails  with integral floor grating, providing extra support to the casualty in the event of an ...

  • PolyMag - Plastic Separator System

    Polymag additives bring metal detectability, X-Ray contrast and magnetic susceptibility into plastic mouldings. The PolyMag process was developed as part of Eriez’ commitment to reducing waste in the processing industry. Eriez PolyMag additive is a non-dusting pellet which allows plastic moulders and extruders to produce metal detectable and ...

    By Eriez Magnetics Europe Ltd Distributor in Odense, DENMARK.

  • Venturi Scrubber for Off-Gas Purification

    The Venturi scrubber is utilised to separate dusts and hazes with particle sizes of less than 3 µm. Amongst other things, dedusting is dependent on: particle diameter and -density, droplet diameter and -quantity, the relative velocity between particles and droplets.

    By Körting Hannover AG Distributor in Valby, DENMARK. from Venturi Scrubber for Off-Gas Purification Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you