Effluent Monitoring Equipment
-
Manufactured by VF, a.s.based in CZECH REPUBLIC
The LEM series monitors allow off-line measurement of volume gamma activity of liquids with very low minimum detectable activities. It is suitable for spectrometric measurement and reporting of liquid effluents from nuclear power facilities. The LEM series monitors allow off-line measurements of the volume gamma activity of liquids with very ...
-
Manufactured by Ultra Electronics Nuclear Control Systemsbased in UNITED KINGDOM
Ultra supply a range of Liquid Effluent Monitoring Systems for continuous gamma radiation measurement in a liquid process line. Options include Inline (where the detector element becomes part of the line), Online (where the detector element is places adjacent to the line) and Bypass (where a pump is used to extract a sample from the ...
-
Manufactured by Scannix SAbased in BELGIUM
The SCAN-EM series monitors provide measurements of radio-activity in liquids and real-time calculation of activity levels for identified radio-isotopes. It is suitable for fast detection of radio-isotopes contained in liquid effluents from nuclear facilities. SCAN-EM series are industrial grade and can be installed in a rough environment. ...
-
Manufactured by Reid & Harrison (1980) Ltd.based in NEW ZEALAND
YARDMASTER HALO provides next generation monitoring and control of your Dairy Effluent system. The SUPERSMART Monitoring & Control platform can be tailored to match the requirements of your farm and you can choose from a range of additional ...
-
Manufactured by US Nuclear Corporationbased in USA
The TRIATHALON model series are highly-sensitive yet rugged stack/effluent monitors built for continuous duty, designed for measuring the Tritium concentration in air. ...
-
based in CANADA
Most industries use clean water in their process in one way or another, whether it is a food processing plant, an analytical lab, or a metal plating facility. After use in an industrial process, water becomes contaminated and generally requires some sort of on-site treatment before it can be disposed of into the sewer system or the environment. Regardless of the point of discharge, various ...
-
based in CANADA
Well-pointing and deep well dewatering methodologies often result in short “bursts” of turbid water generated during the first few hours after the new wells have been drilled or jet-punched. After a short period of time, groundwater typically clears up and looks just like drinking water. Despite this fact, dewatering effluent ...
-
Manufactured by In-Situ Processbased in USA
Monitoring Final Effluent Suspended Solids or Turbidity is a key parameter for assessing the quality of the effluent in respect of meeting discharge consent and permitting levels. It is also an excellent indicator of the basic performance of the treatment works. An increase in the level of Turbidity is an indicator to plant operators that ...
-
Manufactured by Drexel Groupbased in INDIA
Water quality probe sensor is a standard industrial output detection of BOD and COD measurement instrument with dual wavelength ultra violet absorption ...
-
Manufactured by E2E Innovative Solutions Pvt Ltd.based in INDIA
EQMS (Effluent Quality Monitoring System) technology is based on unique method FTLS UV spectroscopy which associate proprietary high resolution spectrograph with Fourier Transform & Least Square mathematical treatment. So, you can believe in our knowledgeable and responsive support team to address your unique needs for the water or ...
-
Manufactured by Technical Associatesbased in USA
Model NEX-BETA is a Beta detector water monitor /controller for measuring of Beta emitting radio nuclides. The electronics are microprocessor with LED/LCD display with plug in modules facilitating quick change or addition of functions at a later date. Modular design allows for rapid repair by module replacement in the ...
-
Manufactured by Technical Associatesbased in USA
The MEDA-SP Ratemeter features an internally mounted 2 inch pancake GM detector with window looking downward from bottom of case and an external crystal scintillation probe for detection of low energy Gammas. A sliding shield protects pancake detector when not in use. This system is half the weight of other ...
-
Manufactured by Technical Associatesbased in USA
This system consists of a light tight detector assembly which is interfaced with the sample via male 1/8' pipe fittings with the readout and processor assembly via two BNC connectors. The sample is passed through a filter and thence to the detector assembly, where it is viewed by two pairs of matched photo multiplier tubes. The table top or rack mounted processor and display portion of this ...
-
Manufactured by Technical Associatesbased in USA
Model RAWA-GP is a single detector water monitor /controller for measuring Gamma emitting radionuclides in RAW WATER. Model RAWA-BGP is a dual detector water monitor measuring both Beta and Gamma contamination in RAW WATER. The electronics are microprocessor with a full color monitor. The system is modular allowing changes or ...
-
Manufactured by Technical Associatesbased in USA
Model NEX-BETA-ABG-7 and 9 are radiation detecting water monitor /controllers for measuring of alpha, beta and gamma emitting radio nuclides. The electronics are microprocessor with LED/LCD display. The system is covered by TA's full one year warranty. On-site service contracts available in many areas. The alpha, beta flow cell and gamma ...
-
Manufactured by Mirion Technologies, Incbased in USA
The ABPM 201S monitor samples air extracted from ventilation ducts or stacks. Can withstand seismic conditions. Allows dynamic compensation of radon and thoron ...
-
Manufactured by Ultra Electronics Nuclear Control Systemsbased in UNITED KINGDOM
Designed for use with our range of pitot flow sensors, the DP2001 has been designed for use on extract and ventilation monitoring systems and offers an extremely sensitive differential pressure measurement. The DP2001 electronics package incorporates the latest digital technology and when used in conjunction with the tried and tested Pitot ...
-
Manufactured by Ultra Electronics Nuclear Control Systemsbased in UNITED KINGDOM
The Gaseous Sample & Return Probe provides a simple solution for gas sample extraction from a stack/duct. The Ultra Universal Mounting Flange offers a standard mounting arrange for any type of stack diameter or geometry. As the sample and return probe is a single piece, it can be easily installed in the stack with a minimum of effort, without the need for mating falnges and ...
-
Manufactured by Ultra Electronics Nuclear Control Systemsbased in UNITED KINGDOM
The Shrouded Sampling Probe for extracting particulate matter from stacks and ducts, has several advantages over non-shrouded probes. These include lower internal wall losses, better off-angle performance, lower sensitivity to flow stream turbulence, and the ability to operate in either a fixed flow or variable flow rate ...
-
Manufactured by Ultra Electronics Nuclear Control Systemsbased in UNITED KINGDOM
Ultra supply numerous flow measurement solutions for ventillation systems, ranging from simple pitot devices to complete arrays. A multi point averaging Pitot tube is normally provided when sufficient straight lengths of duct/stack are available to produce fully developed turbulent flow. The multi point Pitot tube is mounted on the duct/stack by using Lab Impex’s very own universal mounting ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you