Electrostatic Precipitation Equipment In Africa
-
Manufactured by Redecam Group SpAbased in ITALY
Our engineering team has been innovating enhancements to our Electrostatic Precipitators (ESPs) for over 30 years and can design them to offer performance compliant with the strictest worldwide air emissions regulations. Redecam’s own “Electrode – Suspension – Rapping” technology optimizes the energy applied to ...
-
based in GERMANY
The GRIMM 5561 electrostatic precipitator is a sampler for aerosols over a wide size range from 0.8 – 1100 nm. The particles can be collected for off-line analysis on different substrates that are suitable for a variety of common analytical tools like transmission electron microscopes (TEM), scanning electron microscopes (SEM) or ...
-
Manufactured by Dürr Systems, Inc.based in USA
Dürr Part.X PW wet electrostatic precipitators are used to effectively clean industrial gases of fine particulate matter, acid mists and aerosols to meet environmental regulations and/or protect downstream equipment. The key features of Part.X PW systems include maximum removal efficiencies, reliable operation, and low operating costs, ...
-
PremiumManufactured by ENVEAbased in FRANCE
offers improved levels of performance which make the PCME STACK 181 very suitable for use as a PM CPMS or PM CEMS that need to comply with US EPA PS-11 for Site Operators looking to satisfy the recent MACT and MATS rules. The PCME STACK 181 is suitable for measuring particle emissions after both bag filter and electrostatic precipitator arrestment ...
-
PremiumManufactured by ENVEAbased in FRANCE
The QAL 181 dust analyzer is suitable for measuring particle emissions after both bagfilter and electrostatic precipitator arrestment plant. The monitor is suitable for measuring both low (0.1mg/m3) and high particulate concentration levels (300mg/m3). TÜV and MCERTS ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone Cross Stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. Used for emissions measurement (mg/m³) after electrostatic precipitators and baghouses or Process control applications. Advanced sensor design includes automatic drift (zero ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved ProScatterTM particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation ...
-
PremiumManufactured by ENVEAbased in FRANCE
TÜV approved DynamicOpacity™ particulate monitor for emission measurement of dust from large dry industrial processes including Baghouses and Electrostatic ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME DM 210 comprises a single compact sensor design with integrated user interface for reliable and robust particulate monitoring for all types of industrial processes. Additional functionality allows the instrument to measure defined units (mg/m³) with QA checks if required by the Process Operator or ...
-
PremiumManufactured by ENVEAbased in FRANCE
The DM 170 is designed to comply with the TÜV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial ...
-
PremiumManufactured by ENVEAbased in FRANCE
Controller based Gross filter failure detector. Detects significant increases in particulate loading providing warnings of filter media degradation in baghouses and cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone TÜV approved filter dust leak monitor suited to the monitoring of filter emissions (0-100%) after bag houses, cartridge filters, cyclones ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME STACKFLOW 400 is an advanced flue gas flow measurement system for continuous monitoring of releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Controller based filter dust leak monitor (0-100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones etc. where performance approvals are not ...
-
PremiumManufactured by ENVEAbased in FRANCE
Flue gas flowmeter for continuous measurement of gas velocity, temperature and pressure in exhaust gas ducts (chimneys or flue pipes). Micro-Venturi technology. The StackFlow 100 is a compact flowmeter for continuous measurement of velocity, temperature and static pressure in exhaust gas ducts ( stacks or flue gas ducts) using the Micro-Venturi technology. From these measurements, StackFlow 100 ...
-
PremiumManufactured by ENVEAbased in FRANCE
Certified Multi-sensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zone and in dry processess with elevated pressures. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks. Robust multi corner cube reflector provides truer reflection of transmitted light compared to traditional “mirror type” reflectors providing greater confidence in measurement. ...
-
PremiumManufactured by ENVEAbased in FRANCE
US EPA PS11 capable ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The 4650-PM is currently available only in the USA and ...
-
PremiumManufactured by ENVEAbased in FRANCE
TUV QAL1 and MCERTS Approved, Stand alone or networked system option Particulate CEM providing high quality emission measurement for dust concentrations from industrial processes. Having a 0–7.5 mg/m³ certification range, the QAL 360 sensor can be used at low or high dust levels meeting the tightened minimum emission limit value of 5 mg/m³ for Large Combustion Plant specified in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you