emissions control Equipment in New Hampshire

23 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: emissions control ×

  • In: USA ×

  • In: New Hampshire ×

Electrostatic Precipitators (ESP)

by Fuel Tech, Inc.     Office in Hooksett, NEW HAMPSHIRE (USA)

The rehabilitation of existing Electrostatic Precipitator (ESP) systems is a cost effective means of improving the performance of aging equipment, thereby regaining lost efficiency and meeting emissions restrictions. Retrofits to ESP systems minimize capital expenditures, eliminate risks inherent when bringing new equipment on line, as well as, ...

Flue Gas Conditioning (FGC) Systems

by Fuel Tech, Inc.     Office in Hooksett, NEW HAMPSHIRE (USA)

Flue Gas Conditioning systems improve the performance of Electrostatic Precipitators (ESPs). Fly ash precipitators do not operate effectively when there is an insufficient amount of sulfur trioxide (SO3) present in the flue gas. By injecting SO3 and, in some cases, ammonia into the flue gas the performance of Electrostatic Precipitators (ESPs) is ...

I-NOx™ Integrated NOx Control Technologies

by Fuel Tech, Inc.     Office in Hooksett, NEW HAMPSHIRE (USA)

Fuel Tech’s I-NOx™ Integrated NOx Reduction System combines proven technologies for cost-effective NOx control from the point of combustion to the stack. These combined technologies may be applied as a retrofit solution for existing units or may be new generating units, capable of NOx reduction exceeding 80%. The front end of an I-NOx ...

Online Monitoring System

by Environmental View Applications     based in Portsmouth, NEW HAMPSHIRE (USA)

The Environmental View Online Monitoring System application was developed for use by large waste-to-energy facilities to display their Continuous Emissions Monitoring (CEMS) or other emissions data online, either internally, externally or both. The impetus for the project was to aid in the emissions monitoring compliance process. By providing the ...

Model AQ-10 - Air Quality Particulate Sensor

by Environmental Devices Corporation (EDC)     based in Plaistow, NEW HAMPSHIRE (USA)

Haz-Dust Model AQ-10 Air Quality Particulate Sensor is a versatile transducer designed to continuously monitor for the presence of airborne particles. The AQ-10 is calibrated for OSHA and EPA regulations. Suitable for monitoring emissions from cyclone, precipitators, bag houses or any dust control device. The AQ-10 ideal for monitoring air quality ...

Husqvarna - Model 236 - Chain Saws

by Cocheco Equipment, Inc.     based in Rochester, NEW HAMPSHIRE (USA)

Husqvarna 236 is ideal for jobs like pruning, lighter cutting tasks and hobby work. Easy to start and operate, with built-in Husqvarna features like ergonomic design, facilitating technology and powerful X-Torq engine with low emissions.

HClear™ HCl Abatement Technology

by Fuel Tech, Inc.     Office in Hooksett, NEW HAMPSHIRE (USA)

Fuel Tech’s HClear™ program is a complete operating program, supported by Fuel Tech’s highly trained engineers and technicians and designed using our extensive computational fluid dynamics (CFD) modeling and process experience. The HClear system injects a liquid for HCl abatement, and requires no capital investment. The HClear program relies on ...

Seapoint - Chlorophyll Fluorometer

by Seapoint Sensors, Inc.     based in Exeter, NEW HAMPSHIRE (USA)

The Seapoint Chlorophyll Fluorometer (SCF) is a high-performance, low power instrument for in situ measurements of chlorophyll. Its small size, very low power consumption, high sensitivity, wide dynamic range, 6000 meter depth capability, and open or pump-through sample volume options provide the power and flexibility to measure chlorophyll in a ...

Seapoint - Ultraviolet Fluorometer

by Seapoint Sensors, Inc.     based in Exeter, NEW HAMPSHIRE (USA)

The Seapoint Ultraviolet Fluorometer (SUVF) is a high-performance, low power instrument for in situ measurement of fluorescent materials including chromophoric dissolved organic matter (CDOM), crude oil, and UV fluorescent dyes. Its small size, very low power consumption, high sensitivity, wide dynamic range, 6000 meter depth capability, and open ...

Seapoint - Fluorescein Fluorometer

by Seapoint Sensors, Inc.     based in Exeter, NEW HAMPSHIRE (USA)

The Seapoint Fluorescein Fluorometer (SFF) is a high-performance, low power instrument for in situ measurements of Fluorescein. Its small size, very low power consumption, high sensitivity, wide dynamic range, 6000 meter depth capability, and open or pump-through sample volume options provide the power and flexibility to measure Fluorescein in a ...

Seapoint - Rhodamine Fluorometer

by Seapoint Sensors, Inc.     based in Exeter, NEW HAMPSHIRE (USA)

The Seapoint Rhodamine Fluorometer (SRF) is a high-performance, low power instrument for in situ measurements of Rhodamine WT. Its small size, very low power consumption, high sensitivity, wide dynamic range, 6000 meter depth capability, and open or pump-through sample volume options provide the power and flexibility to measure Rhodamine WT in a ...

UNTHA - Model RS30/40 - Wood Shredder

by UNTHA Shredding Technology     Office in Hampton, NEW HAMPSHIRE (USA)

The reliable and very sturdy RS30 and RS40 shredders have been tested and proven over several decades and are used particularly for processing long solid timber pieces. The wood chippers can be operated as stand-alone solutions or integrated into complex systems where they tend to be a favourite thanks to their very compact design. They are ...

UNTHA - Model XR3000R - Waste Shredder

by UNTHA Shredding Technology     Office in Hampton, NEW HAMPSHIRE (USA)

With minimal operating costs and maximum performance, the XR is by far the most innovative waste pre-shredder for municipal solid waste (MSW), C&D waste and commercial & industrial waste in the global marketplace. With a completely new drive concept, “UNTHA Eco Drive” guarantees up to 50 % less energy consumption in comparison to conventional ...

UNTHA - Model RS30/40 Series - Four-shaft Shredders

by UNTHA Shredding Technology     Office in Hampton, NEW HAMPSHIRE (USA)

The reliable and heavy duty UNTHA 4-shaft RS30 and RS40 series shredders have been tested and proven over several decades and were specifically designed for a broad application range. The shredding machines can be operated as stand-alone solutions or integrated into complex systems where they tend to be a favourite thanks to their very compact ...

UNTHA - Model XR Series - Waste Shredder

by UNTHA Shredding Technology     Office in Hampton, NEW HAMPSHIRE (USA)

UNTHA’s XR shredder is a slow running pre-shredder and has been developed for the coarse and medium shredding of untreated municipal solid waste (MSW), bulky waste and commercial and industrial waste (C&I waste).

Prism ICP

by Teledyne Leeman Labs     based in Hudson, NEW HAMPSHIRE (USA)

In today’s economy, we are challenged to do more with less. In the laboratory, this translates to processing more samples with fewer people, while spending less money on instrumentation, consumables and supplies. Often, when you compare analytical instruments, you find you must choose between performance and price; seldom will you find one ...

Hydra AF

by Teledyne Leeman Labs     based in Hudson, NEW HAMPSHIRE (USA)

The Hydra AF is a fully automated, cold vapor atomic fluorescence analyzer designed to fit your analytical needs and budget. The Hydra AF has been developed to meet all performance and QC requirements of EPA method 245.7. Analytically, this system is capable of detection limits of less than 0.2 ppt and a dynamic range that extends to nearly 100 ...

Mercury Analysis - Hydra AA

by Teledyne Leeman Labs     based in Hudson, NEW HAMPSHIRE (USA)

The need to measure mercury levels in a wide variety of samples has become increasingly important. The most commonly used technique for mercury analysis is cold vapor atomic absorption spectrometry (CVAAS).Hydra AA is a fully automated mercury analyzer that achieves a 1-2 ppt detection limit while employing EPA compliant cold vapor atomic ...

Prodigy ICP

by Teledyne Leeman Labs     based in Hudson, NEW HAMPSHIRE (USA)

Prodigy brings together the latest in solid-state detector technology and Leeman Labs advanced high dispersion Echelle spectrometer to provide the most power ICP available today. Not only does Prodigy provide superb resolution, stability and detection limits for reliable concentration measurements, it also provides a wide variety of optional ...

SPOT Aluminium Extrusion, Quench and Strip (AL EQS) Pyrometer

by AMETEK     Distributor in NEW HAMPSHIRE (USA)

Building on the vast expertise Ametek land has in measuring accurate temperature of aluminium at an extruder, quench or strip mill, the spot al EQS now has all three measurement modes in one digital pyrometer, measuring from 200 to 700 ºC / 392 TO 1292 ºF. Utilising the latest cutting edge design in detectors combined with the most ...

Need help finding the right suppliers?

Let the XPRTs do the work for you