Emissions Directive Equipment
-
by Total S.Abased in FRANCE
In 2013, flaring of associated gas generated approximately 30% of our greenhouse gas emissions. In addition, our job is to produce energy, but we also use energy to do that. Because our energy use accounts for a large share of our greenhouse gas emissions and has a cost, it is important that we reduce it. We have a dual imperative: reducing ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
We can provide a range of accredited, portable or continuous emissions monitoring systems which satisfy both operator and regulatory requirements including the waste incineration directive (WID), large combustion plant directive (LCPD) and the newer industrial emissions directive (IED). These systems are ...
-
PremiumManufactured by ENVEAbased in FRANCE
mg/m³ for Large Combustion Plant specified in the Industrial Emissions Directive. ...
-
Manufactured by Process Combustion Ltd.based in UNITED KINGDOM
When you have issues of high calorific value waste gas or a liquid stream then the Process Combustion’s Direct Fired Thermal Oxidisers meet the most stringent requirements of the European Solvents Emissions Directive (SED) and the UK’s Waste Incineration Directive. Designed and built to client’s own specific ...
-
Manufactured by Seidbased in NORWAY
ModuPlasma is an odor abatement system that uses direct treatment, which means the emission is led through the energy field, in opposition to other plasma solutions, where ozone is injected into the emission. This direct treatment results in oxidation hundreds of thousands times faster than in nature. Quick results and done in an ...
-
by Seid ASbased in NORWAY
ModuPlasma is an odor and VOC abatement system that uses direct treatment, which means the emission is normally led through the energy field, in opposition to some other plasma solutions, where ozone and associated “radicals” are injected into the emission. This direct treatment results in oxidation 1 to 10 million ...
-
Manufactured by D.R. Technology, Inc.based in USA
Absorber systems for direct emission control of pollutants and as backup for existing malfunctioning absorbers. Packed, trayed and spray towers can be ...
-
Manufactured by sterilAir AGbased in SWITZERLAND
sterilAir UVR-4K air disinfection systems serve for air disinfection in rooms with low convection, where direct emission has to be avoided under all circumstances. Typical applications are production, packaging and maturing rooms as well as cold storage areas. ...
-
Manufactured by TASK Industrial Environmental Techniquesbased in BELGIUM
. in a well defined mixing ratio, or in several layers. This natural "filter bed" or biomass can be contained in an open or closed biofilter and is surrounded by a thin water film. Part of the pollutants in the emission flow directed through the biomass will already dissolve in this water film; part of the pollutants is retained by the biomass ...
-
Manufactured by Muntersbased in USA
EC52D delivers a large amount of air, maintaining reliability and energy efficiency, with an extremely smooth noise emission. The direct drive motor is a maintenance-free solution for the ventilation system, as there is no longer need to verify the integrity of the transmission components: v-belts, pulleys etc. The patented ...
-
Manufactured by Automatic Flare Systems Limited (AFS)based in UNITED KINGDOM
Our high temperature (HT) flare stack provides an ideal solution to meet the growing number of EU directives on emissions from landfill gas ...
-
Manufactured by Airwave Electronics Ltd.based in CANADA
The AE2430/2440 HYFED hydrogen flame emission detector is a direct reading continuous ambient monitor that uses a flame photometric detector (FPD). The FPD provides fast response and is the most sensitive method for determining low concentrations of all sulfur or phosphorus/phosphine species in air. The AE2430/2440 is one in a series of ...
-
Manufactured by FIAlab Instruments, Incbased in USA
The SMA-FL Fluorescence flow cell provides an easy way of carrying out fluorescence measurements on a fiber optic spectrometer. The design is similar to the SMA-Z series absorbance cells, in that excitation light is sent into the flow cell via a fiber optic cable, and a second cable is used to collect the fluorescence emission light and ...
-
Manufactured by Chou Magnetics Co,Ltdbased in CHINA
improve your fuel mileage an average of 10%-20%. The unit gives you high test performance and lets low carbon monoxide. The gauss value has 12000 gauss. Increase mileage (Fuel saving of up to 25%) Pays for itself within a couple of months from your fuel's bill Your engine will last much longer. Reduces carbon monoxide emission ...
-
Manufactured by AMS Analiticabased in ITALY
It consists of a probe sampling device with a spout aimed in the opposite direction of the emission exhaust with a heated pre-filter to withhold any particles interfering with the sample (device provided for monitoring of SOx and NOx, SOV without heating). The StackGas 2001 probe is configured to allow the user easy sampling. It is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you