Showing results for: Ankersmid Emissions Monitoring Equipment Available In Faroe Islands
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
Gas flows into the filter body by one of two inlets in the standard filter head. The gas flows out of holes in the lower part of the filter and then passes through the adsorption material to exit again at the head of the filter ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
This unique microprocessor controlled Peltier Cooler has been designed with a powerful dew point stabiliser. The dew point is set at 4°C but can be changed at any value between 1 and 15°C. The condensate that is formed should be removed by a peristaltic pump, automatic drain or collection vessel. The heat exchanger is demountable and ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
Due to its modular design and various options, the Ankersmid heated sample probe filters cover the widest range of applications. With a choice of different lengths of heated filter body, a filter element of 150mm length, suitable for most applications up to 1g dust/m3 can be integrated. 180mm filters with a larger filter surface are used for applications up to 4g dust/m3; with the blow- back ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
Due to its modular design and various options, the Ankersmid heated sample probe filters cover the widest range of applications. In the heated filter body a filter element of 150mm length, suitable for most applications up to 1g dust/m3, is integrated. A 180mm long filter with an outer diameter of 40mm and made of stainless steel can be optionally used for applications up to 4g dust/m3; with the ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
Due to various acid dew points at various applications the probe is heated up to 180°C. A filter element of 150mm is integrated, suitable for most applications up to 1g dust/m3. A significant advantage is that this filter is replaceable without dismounting the probe and without using any tools. Due to its modular design and various options, the heated sample probe covers the widest range of ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The ACC cooler offers precision, safety and long-term stability for extractive analytics. The very low gas dissolution rate is attained owing to the new cooler technology (Patents applied). Both the permanent separation of the condensate from the gas phase, as well as the shorter contact time of the gas in the system, plays important roles in reducing gas dissolution ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The ACC cooler offers precision, safety and long-term stability for extractive analytics. The very low gas dissolution rate is attained owing to the new cooler technology (Patents applied). Both the permanent separation of the condensate from the gas phase, as well as the shorter contact time of the gas in the system, plays important roles in reducing gas dissolution ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The stationary system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
g/m³, a blowback option can be fitted. Calibration gas can be injected directly into the probe through the calibration gas port according to emission monitoring standards enforcing test gas feeding via the probe’s filter element. ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The portable system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
Due to various acid dew points at various applications the probe is heated up to 180°C. A filter element of 150mm is integrated, suitable for most applications up to 1g dust/m3. A significant advantage is that this filter is replaceable without dismounting the probe. with the filter element of 150mm length this probe is suitable for most applications up to 1g dust/m3; with the blow-back ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you