Emissions Monitoring Equipment Available In Bhutan
-
PremiumManufactured by ENVEAbased in FRANCE
The Leak Locate 660 PLUS is a dust emission monitoring system incorporating a digital network and advanced graphics capability. It is designed for use in any processes where filter type arrestment plant are used, eg bag, ceramic and cartridge filters. The system comprises up to 32 networked sensors, a central control unit, user interface with ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 5000 is state-of-the-art Continuous Emission Monitoring System, and is designed for a wide variety of stationary emission monitoring applications. The IMR 5000 is a stand-alone analysis system that works automatically. Available in a 19” rack mount or rugged wall mounted enclosure. The wall mount enclosure meets ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The flexibility of the IMR 5000 CEMS allows it to offer an endless set of possibilities to measure different parameters like CO. C02, NO. X02, CH4, HC, NH3, C12, HC1, H2, 03, S02, H2S, 02, Velocity, Draft, Dust, Temperature and other parameters on ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Our RD100 Real Driving Emissions system is an accurate and reliable monitoring system that can measure the emissions from car exhaust in real life conditions. The RD100 system is mounted on a car and measures the real driving emissions during an ordinary ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The flexibility of the IMR 5000 CEMS allows it to offer an endless set of possibilities to measure different parameters like CO, CO2, NO, NO2, CH4, HC, NH3, Cl2, HCl, H2, O3, SO2, H2S, O2, Velocity, Draft, Dust, Temperature and other parameters on ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
.UV-FTIR (In-Situ): Dual Channel FTIR and UV-DOAS Continuous Emissions Monitoring. All criteria gases with one analyzer. Cross stack and parallel cell models. Insitu stack monitoring, non contact. Outdoor model ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control, and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for a ...
-
PremiumManufactured by ENVEAbased in FRANCE
The DM 170 is designed to comply with the TÜV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial ...
-
PremiumManufactured by ENVEAbased in FRANCE
Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features short response times, dynamic ranges and stable measurement under all ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Emission Monitoring System CEMS II e offers modular and TÜV and MCERTS certified (QAL1) solution for environmental compliance in industrial processes, such as powerplants, waste incineration, cement plants and beyond. The system adjusts to changes in regulations and future advances of emissions monitoring best ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
We can provide a range of accredited, portable or continuous emissions monitoring systems which satisfy both operator and regulatory requirements including the waste incineration directive (WID), large combustion plant directive (LCPD) and the newer industrial emissions directive (IED). These systems are currently operational in a number of ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty-five years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. The accuracy and repeatability make them the unit of choice for source ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better ...
-
PremiumManufactured by ENVEAbased in FRANCE
The QAL 181 dust analyzer is suitable for measuring particle emissions after both bagfilter and electrostatic precipitator arrestment plant. The monitor is suitable for measuring both low (0.1mg/m3) and high particulate concentration levels (300mg/m3). TÜV and MCERTS ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you