emissions standard Equipment available in Benin

Available in Benin| Near Benin
1043 Results found

We couldn't find any emissions standard equipment in Benin

Here is a list of results available in Benin

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: emissions standard ×

  • Available in: Africa ×

  • Available in: Benin ×


Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

Sierra - Model BG-3 Elite - High Performance Partial Flow Dilution System

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

In use since 2004, BG3 PFD (Partial Flow Dilution) technology effectively performs engine research and development to accurately sample exhaust PM (Particulate Matter) emissions over both steady state and transient test cycles (Read Case Study). On January 7, 2011, PFD was signed into law and is now included in the United States Federal Register ...

Model VCEM5000 - Gas Velocity Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The VCEM 5000/51000 represents the latest generation of CODEL’s unique flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

Soot-Trak - Real-Time Diesel Soot Mass

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Sierra Instruments Soot-Trak laser measures real-time engine soot particle mass emissions and performs characterization of soot particle particle size, primary particle surface area and number. Soot-Trak provides researchers and engine developers the accurate information they require about particle transport. With measurement accuracy of 5% ...

PlasmaQuant - Model PQ 9000 Elite - Optical Emission Spectroscopy

by Analytik Jena AG     based in Jena, GERMANY

PlasmaQuant PQ 9000 is a High-Resolution Array ICP OES instrument for the elemental analysis of demanding samples.


Gasmet - Engine Emissions Monitoring System (EEMS)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The Gasmet engine emissions monitoring system EEMS has been designed engine emissions monitoring which require for fast response time. A typical application for Gasmet EEMS consists of H2O, CO2, CO, N2O, NO, NO2, SO2, HCl, HF, NH3, CH4, C2H6, C3H8, and C2H4, but it can be e

Dust-Laying Sprayers and Odor-Absorbing Machines

by EmiControls     based in Bolzano, ITALY

Mobile or fixed dust-laying sprayers and odor-reducing machines. In addition to customized nozzle system installations, EmiControls also offers standardized dust-laying sprayers. Turbine models are made as well as dust-control lances. Both work in the same way. The nozzles generate a fine mist which binds the dust particles at source. All the ...

Model QAL2 EN 14181 - Quality Assurance Standard

by Protea Limited     based in Middlewich, UNITED KINGDOM

BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a ...

Environnement S.A. - Model MIR 9000H - Continuous Stack Emission Monitoring Gas Analyzer

by Environnement S.A     based in Poissy, FRANCE

Continuous stack emission monitoring gas analyzer available in 2 versions for the simultaneous and continuous measurement of:  NH3 and H2O, CO, CO2, NO, NO2, SO2, HCl, HF, O2 in addition of the NH3 and the H2O.  Designed to measure wet and corrosive sample. TÜV certified as compliant to the European standard EN15

Land - Model FGA 900 Series - Range of Stack Gas Emissions Analysers

by AMETEK Land     based in Dronfield, UNITED KINGDOM

The FGA range of analyzers use dual sensor technology to measure the levels of Nitrogen Oxides, Carbon Monoxide and Oxygen in flue gas. O2, CO, NO, NO2, NOX.

Land - Model 4500 MkIII - Opacity and Dust Emissions Compliance Monitor

by AMETEK Land     based in Dronfield, UNITED KINGDOM

The Land Model 4500 MkIII has reset the industry standard on compliance opacity and dust concentration measurement. Combining the unique features of three patented technologies, the 4500 MkIII achieves the highest available specification for the principal performance parameters, as defined by the internationally recognized ASTM Standard D 6216-07.

CMC SmartCEMS-EU - Model SCEU - Predictive Emission Monitoring System

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS-EU PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 75 regulations. The system comes with a data acquisition component and is guaranteed to meet EU standards for combustion turbines and gas/oil fired boilers, or ...

CMC SmartCEMS-60 - Model SCUS60 - Predictive Emission Monitoring System

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS-60 PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 60 regulations. The system comes with a data acquisition component and is guaranteed to meet 40 CFR Part 60, Appendix B, PS-16 audit standards on combustion ...

J.U.M. - Model W600 - Wall Mount All Heated Total Hydrocarbon Analyzer

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The J.U.M W600 Heated Total Hydrocarbon Analyzer is a very compact wall or panel mount heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion ...

Environnement S.A. - Model GRAPHITE 52M - Heated FID Total Hydrocarbon (THC, COV, CH4) Analyzer

by Environnement S.A     based in Poissy, FRANCE

Heated FID Total Hydrocarbon (HC) Analyzer. -MCERTs and TÜV certified -Complies with EN 12619 & 13 526 standards (with He/H2 fuel) -Fitted with FID for continuous and simultaneous measurement of Total Hydrocarbons (THC), Non-methanic Hydrocarbons (NmHC) and Methane (CH4) in compliance with EN 12619

CMC SmartCEMS - Model SCAEMS - Alternative Emissions Monitoring Systems

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS Alternative Emissions Monitoring System is a complete system that provides continuous data recording and report generation compliant under U.S. EPA Alternative Emissions Monitoring Systems (CAEMS) regulations. The system comes with a data acquisition component and is guaranteed to meet CAM and U.S. EPA standards for combustion ...

J.U.M. - Model 109L - High Temperature Total Hydrocarbon/Non-Methane Hydrocarbon Analyzer

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The J.U.M. Engineering HFID Model 109L is a competitively priced, compact table top or 19' rack mount, heated Non Methane Hydrocarbon analyzer for the measurement in ambient air, air emissions and other gases.

J.U.M. - Model 3-700 - High Temperature Total Hydrocarbon Analyzer

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The J.U.M Heated Total Hydrocarbon Analyzer Model 3-700 FID is designed to be installed directly upstream of a FTIR analyzer (e.g. Gasmet) to continuously measure the total concentration of hydrocarbons within a gaseous sample. All controls which allow to calibrate the FTIR or FID individually are built in. Sources can be ambient air, exhaust ...

J.U.M. - Model 3-600 - High Temperature Total Hydrocarbon Analyzer

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from ...

Immission Analyzers

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

Our portfolio for AQM (Air Quality Monitoring) applications consists of compact rack type analyzers designed for monitoring specific parameters in ambient air. Each of these systems has its proper operation principle optimized for one specific parameter, but all carry the same quality tag: high sensitivity, stability and reliability. The interface ...

Need help finding the right suppliers?

Let the XPRTs do the work for you