emissions standard Equipment available in Pakistan

Available in Pakistan| Near Pakistan
1079 Results found

We couldn't find any emissions standard equipment in Pakistan

Here is a list of results available in Pakistan

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: emissions standard ×

  • Available in: Asia & Middle East ×

  • Available in: Pakistan ×


Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

Soot-Trak - Real-Time Diesel Soot Mass

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Sierra Instruments Soot-Trak laser measures real-time engine soot particle mass emissions and performs characterization of soot particle particle size, primary particle surface area and number. Soot-Trak provides researchers and engine developers the accurate information they require about particle transport. With measurement accuracy of 5% ...

Model VCEM5000 - Gas Velocity Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The VCEM 5000/51000 represents the latest generation of CODEL’s unique flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

Sierra - Model BG-3 Elite - High Performance Partial Flow Dilution System

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

In use since 2004, BG3 PFD (Partial Flow Dilution) technology effectively performs engine research and development to accurately sample exhaust PM (Particulate Matter) emissions over both steady state and transient test cycles (Read Case Study). On January 7, 2011, PFD was signed into law and is now included in the United States Federal Register ...

PlasmaQuant - Model PQ 9000 Elite - Optical Emission Spectroscopy

by Analytik Jena AG     based in Jena, GERMANY

PlasmaQuant PQ 9000 is a High-Resolution Array ICP OES instrument for the elemental analysis of demanding samples.

Dust-Laying Sprayers and Odor-Absorbing Machines

by EmiControls     based in Bolzano, ITALY

Mobile or fixed dust-laying sprayers and odor-reducing machines. In addition to customized nozzle system installations, EmiControls also offers standardized dust-laying sprayers. Turbine models are made as well as dust-control lances. Both work in the same way. The nozzles generate a fine mist which binds the dust particles at source. All the ...


Gasmet - Engine Emissions Monitoring System (EEMS)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The Gasmet engine emissions monitoring system EEMS has been designed engine emissions monitoring which require for fast response time. A typical application for Gasmet EEMS consists of H2O, CO2, CO, N2O, NO, NO2, SO2, HCl, HF, NH3, CH4, C2H6, C3H8, and C2H4, but it can be e

Model QAL2 EN 14181 - Quality Assurance Standard

by Protea Limited     based in Middlewich, UNITED KINGDOM

BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a ...

Land - Model 4500 MkIII - Opacity and Dust Emissions Compliance Monitor

by AMETEK Land     based in Dronfield, UNITED KINGDOM

The Land Model 4500 MkIII has reset the industry standard on compliance opacity and dust concentration measurement. Combining the unique features of three patented technologies, the 4500 MkIII achieves the highest available specification for the principal performance parameters, as defined by the internationally recognized ASTM Standard D 6216-07.

Land - Model FGA 900 Series - Range of Stack Gas Emissions Analysers

by AMETEK Land     based in Dronfield, UNITED KINGDOM

The FGA range of analyzers use dual sensor technology to measure the levels of Nitrogen Oxides, Carbon Monoxide and Oxygen in flue gas. O2, CO, NO, NO2, NOX.

Environnement S.A. - Model MIR 9000H - Continuous Stack Emission Monitoring Gas Analyzer

by Environnement S.A     based in Poissy, FRANCE

Continuous stack emission monitoring gas analyzer available in 2 versions for the simultaneous and continuous measurement of:  NH3 and H2O, CO, CO2, NO, NO2, SO2, HCl, HF, O2 in addition of the NH3 and the H2O.  Designed to measure wet and corrosive sample. TÜV certified as compliant to the European standard EN15

J.U.M. - Model 3-600 - High Temperature Total Hydrocarbon Analyzer

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from ...

CMC SmartCEMS - Model SCAEMS - Alternative Emissions Monitoring Systems

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS Alternative Emissions Monitoring System is a complete system that provides continuous data recording and report generation compliant under U.S. EPA Alternative Emissions Monitoring Systems (CAEMS) regulations. The system comes with a data acquisition component and is guaranteed to meet CAM and U.S. EPA standards for combustion ...

Autosampler for Immission Applications

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

The autosampler of the 'Ambient Air' product portfolio is a high performance, automated system for sampling airborne particulates and can also identify specific pollutants. Precision volumetric air flow control and 40 mm filtering diameter provides precision results, in compliance with European and US standards. A wide range of ...

CMC SmartCEMS-EU - Model SCEU - Predictive Emission Monitoring System

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS-EU PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 75 regulations. The system comes with a data acquisition component and is guaranteed to meet EU standards for combustion turbines and gas/oil fired boilers, or ...

CMC SmartCEMS-60 - Model SCUS60 - Predictive Emission Monitoring System

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS-60 PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 60 regulations. The system comes with a data acquisition component and is guaranteed to meet 40 CFR Part 60, Appendix B, PS-16 audit standards on combustion ...

J.U.M. - Model 3-500 - High Temperature Total Hydrocarbon Analyzer

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The J.U.M. Engineering HFID Model 3-500 is a low cost, compact 19' rack mount heated total hydrocarbon analyzer for high accuracy, sensitivity and stability.

J.U.M. - Model 603 - Total Hydrocarbon Analyzer Heated FID

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The HFID Model 603 is a competitively priced, digitally controlled self extracting, heated total hydrocarbon analyzer for high accuracy, sensitivity and long term stability. It can be used in a 19' rack or as a table top instrument.

Multigas IR Analyzers

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

Our portfolio for CEM applications consists of compact analyzers designed for monitoring specific parameters in stacks, either extractive or directly on the stack. The universal system as desribed in this section is an extractive type of analyzer that can measure up to 10 gases simultaneously by IR gas filter correlation. The interface can ...

Beta Absorption Analyzers

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

The Beta absorption analyzer of the AppliTek CEM portfolio is designed for the real-time measurement of particulate emissions from stationary sources such as stacks, incinerators, furnaces. Isokinetic sampling assures that the sample flow rate within the analysis stage is equal to that of the flue gas stream in the stack, and results in reliable ...

Need help finding the right suppliers?

Let the XPRTs do the work for you