Engine Emissions Equipment Available In Dominica
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
Based on high-precision ultraviolet differential absorption spectroscopy gas analysis principle( UV-DOAS), our Gasboard-2201 NOx bench can accurately measure the engine emission gas concentration of NO, ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ultra-fast NH3 measurement (Ultra-fast response time : < 2 seconds). The use of the UV range for the measurement of NH3 has been specifically selected to avoid any interference with other major emission gases (CO, CO2, H2O etc..) that do not absorb in the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions ...
-
PremiumManufactured by ENVEAbased in FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
-
Manufactured by A & D Technology, Inc.based in USA
The HELIOS platform is equipped with the functions required by any HILS system. The all-in-one design with integrated I/O boards and Interface boards makes the system compact and effective for quick building of HIL system. It is also a platform that enables high-speed inter-node communication and low-latency model synchronization to enable multi-node systems with multiple enclosures required for ...
-
Manufactured by A & D Technology, Inc.based in USA
The only FTIR system optimized for use on-board, and includes integration of data from the ECU, weather data, GPS data and time-aligned video. ...
-
Manufactured by A & D Technology, Inc.based in USA
Multi-component gas analyzer based on Fourier Transform Infrared (FTIR) technology, allows for the continuous raw or dilute measurements of up to 40 gases using one device. A&D offers a variety of in-cell and in-vehicle Gas Analyzers for emissions testing including testers that detect H2, NH3, and our BEX-1000FT multi-component gas ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA80H is a 3-inch mobile high head pump suitable for pumping slightly polluted fluids with solids up to 25 mm. The centrifugal pump is fitted with its own priming system and is therefore dry self-priming. A modern and economical diesel engine meets the highest emission standards for use worldwide. This high head pumpset can be ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The FM50 is a multifunctional control module designed for use in gas compressor applications. It provides control for gas fuel, air/fuel ratio, and speed for gas engines, as well as monitoring and protection features. The FM50 can communicate with other control systems and devices using various protocols and interfaces, including Modbus, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe emission measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure inside the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The PEMS-1000 portable On-board Emission Test System is a kind of portable analysis device used for real-time detection of vehicle engine exhaust, measuring related technical requirements for exhaust emission test of light-duty vehicles, heavy-duty vehicles and non-road machinery. The system, adopting integrated design to install on the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Resolution ELPI+ (Electrical Low Pressure Impactor, HR-ELPI+) is an improved version of the widely used ELPI+ instrument. The High Resolution ELPI+ utilizes a data inversion algorithm that gives real-time particle size distribution in up to 500 size classes 6 nm – 10 μm. Other High Resolution ELPI+ features include wide particle sample concentration range, robust ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The MPB 20.55gh Trommel Screen is a deluxe screening workhorse that consistently and effectively separates a large volume of material even in unforgiving terrain. This robust machine boasts an 18ft long 6ft diameter drum with levelling system allowing it to work in uneven terrain. Use the levelling mechanism to create drum inclination to work with even more materials. Several industries benefit ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter dilution parameters can be monitored on an integrated LCD display and a rotary controller knob allows the user ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA400G is a 16-inch diesel driven high flow pump for flood control and general use. The centrifugal pump is fitted with its own MP100 priming system and is therefore dry self-priming. A modern and variable speed diesel engine meets the highest emission standards for use worldwide. The state-of-the-art sound attenuated canopy is ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Exhaust Air Cleaning in Stables: Dust and ammonia are the substances to be cleaned from the waste air. Prescribed are cleaning efficiencies from 70-90% depending on where the sheds/stables are located. To efficiently and economically comply with this task, filling materials are needed which can be used in both counter and cross-flow applications (e.g. tunnel ventilation) in local waste air ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you