Engine Emissions Equipment
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
Based on high-precision ultraviolet differential absorption spectroscopy gas analysis principle( UV-DOAS), our Gasboard-2201 NOx bench can accurately measure the engine emission gas concentration of NO, ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ultra-fast NH3 measurement (Ultra-fast response time : < 2 seconds). The use of the UV range for the measurement of NH3 has been specifically selected to avoid any interference with other major emission gases (CO, CO2, H2O etc..) that do not absorb in the ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions ...
-
PremiumManufactured by ENVEAbased in FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
-
based in USA
Venturi scrubbers are used primarily for particulate removal, and operate on the principle of impaction and agglomeration. Liquid is added to the venturi inlet and accelerated with the gas stream to a high velocity in the venturi throat, where it is forced into intimate contact with the particulate and gaseous contaminants, increasing the particulate mass and momentum. The now-wetted particle is ...
-
based in USA
Ambient provides state of the art Biofiltration System for VOC and Odor Control. These systems operate at ambient temperature, and are replacing thermal oxidizers as the control system of choice. The reasons for this are many and include such things as ambient temperature operation (for enhanced safety, reduced insurance costs and little or no fuel use), simple maintenance, long bed life, the ...
-
based in USA
Ambient"s tower packing designs result in the highest removal efficiency at the lowest capital and operating costs. Available in many materials, shapes and sizes, offering corrosion resistance, low pressure drop and high efficiency, our packing selections are effective for a wide range of applications and ...
-
based in USA
Electrostatic Precipitators and Baghouses (fabric filters) are applied for dry dust collection. Each system has unique features and applications. Dust and particulate is removed and reclaimed in the dry state, eliminating water pollution. Ambient offers pre-engineered modular designs for all gas flows with critical components ...
-
Manufactured by A & D Technology, Inc.based in USA
The HELIOS platform is equipped with the functions required by any HILS system. The all-in-one design with integrated I/O boards and Interface boards makes the system compact and effective for quick building of HIL system. It is also a platform that enables high-speed inter-node communication and low-latency model synchronization to enable multi-node systems with multiple enclosures required for ...
-
Manufactured by A & D Technology, Inc.based in USA
The only FTIR system optimized for use on-board, and includes integration of data from the ECU, weather data, GPS data and time-aligned video. ...
-
Manufactured by A & D Technology, Inc.based in USA
Multi-component gas analyzer based on Fourier Transform Infrared (FTIR) technology, allows for the continuous raw or dilute measurements of up to 40 gases using one device. A&D offers a variety of in-cell and in-vehicle Gas Analyzers for emissions testing including testers that detect H2, NH3, and our BEX-1000FT multi-component gas ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA75 is a 3-inch mobile diesel driven pump and suitable for pumping dirty water with solids up to 42 mm. The centrifugal pump is equipped with a vacuum system and is therefore dry self-priming. A modern and economical diesel engine meets the highest emission standards for use worldwide. Its low weight and compact dimensions make it an ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA80H is a 3-inch mobile high head pump suitable for pumping slightly polluted fluids with solids up to 25 mm. The centrifugal pump is fitted with its own priming system and is therefore dry self-priming. A modern and economical diesel engine meets the highest emission standards for use worldwide. This high head pumpset can be ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The FM50 is a multifunctional control module designed for use in gas compressor applications. It provides control for gas fuel, air/fuel ratio, and speed for gas engines, as well as monitoring and protection features. The FM50 can communicate with other control systems and devices using various protocols and interfaces, including Modbus, ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Exhaust Air Cleaning in Stables: Dust and ammonia are the substances to be cleaned from the waste air. Prescribed are cleaning efficiencies from 70-90% depending on where the sheds/stables are located. To efficiently and economically comply with this task, filling materials are needed which can be used in both counter and cross-flow applications (e.g. tunnel ventilation) in local waste air ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The PEMS-1000 portable On-board Emission Test System is a kind of portable analysis device used for real-time detection of vehicle engine exhaust, measuring related technical requirements for exhaust emission test of light-duty vehicles, heavy-duty vehicles and non-road machinery. The system, adopting integrated design to install on the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Resolution ELPI+ (Electrical Low Pressure Impactor, HR-ELPI+) is an improved version of the widely used ELPI+ instrument. The High Resolution ELPI+ utilizes a data inversion algorithm that gives real-time particle size distribution in up to 500 size classes 6 nm – 10 μm. Other High Resolution ELPI+ features include wide particle sample concentration range, robust ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you