Only show results available in Virginia? Ok

Environmental Drill Bit equipment

  • Champion - Model RC160 - Down Hole Hammer

    Valveless down hole hammer design. Ability to drill efficiently against high heads of water. Designed to operate at pressures up to 200 PSI (13.6 BAR).  Superior directional stability in horizontal applications. Ejecting cuttings through the collection tube eliminates traditional hole cleaning problems. Environmentally sensitive - no foam ...

    By Numa based in Thompson, CONNECTICUT (USA). from Reverse Circulation Hammers & Bits Product line

  • Challenger - Model RC100 - Down Hole Hammer

    Valveless down hole hammer design. Ability to drill efficiently against high heads of water. Designed to operate at pressures up to 250 PSI (17.0 BAR). Reversible non-ported piston case for extended life.  Superior directional stability in horizontal applications. Ejecting cuttings through the collection tube eliminates traditional hole ...

    By Numa based in Thompson, CONNECTICUT (USA). from Reverse Circulation Hammers & Bits Product line

  • Chemco - Model Chemdrill LUBE - High-powered Environmental Lubricant

    Chemdrill LUBE is a high-powered environmental lubricant with a vegetable oil base. It is designed to reduce torque and drag and to improve the overall performance of drilling fluid systems such as muds and bentonites. The Chemdrill LUBE may be used as is or premixed with Chemdrill MUD or Chemdrill MUD 500 to form a complete drilling fluid system.

    By Chemco, Inc. based in Saint-Augustin-de-Desmaures, QUEBEC (CANADA). from Drilling Products Product line

  • Patriot - Model RC50 - Down Hole Hammer

    Valveless down hole hammer design. Designed to operate at pressures to 500 PSI (34.5 BAR). Reversible non-ported piston case for extended life. Ability to drill efficiently against high heads of water. Superior directional stability in horizontal applications. Ejecting cuttings through the collection tube eliminates traditional hole cleaning ...

    By Numa based in Thompson, CONNECTICUT (USA). from Reverse Circulation Hammers & Bits Product line

  • Drilling Mud Centrifuges

    The drilling rigs use drilling mud (high density drilling fluid) to pack to drill column. The drilling mud is a mix of chemicals but there are three basic types; water based, diesel based, and synthetic oil based. The H-900-OMC unit is almost always used on synthetic oil based drilling mud or diesel based mud. Synthetic oil based drilling mud is ...

    By TEMA Systems, Inc. based in Cincinnati, OHIO (USA). from Mineral & Environmental Centrifuges Product line

  • Three Cone Rock Bits

    Three Cone Rock bits  are sophisticated products made from high quality materials (steel forging, carbide, and others). These Three Cone Rock bits are designed for a multitude of drilling applications including: Gas and Oil production, Mining and Mineral Exploration, Water Well production, Construction, Horizontal and Directional, Geotech, ...

    By Star Packer Drilling Equipment based in Yenimahalle, TURKEY.

  • Model T500XD - Trailer Mounted Drilling Rig

    Horizontal and Directional Drilling, Pad and Conventional Shale Gas, CBM, Oil. Schramm’s new T500XD Telemast drill rig rated 500,000 lb. hook load is on its way to energy plays around the world in a highly compact package. It offers best in class 35,000 ft-lbs of top drive torque, third party directional steering interface and 80,000 lbs. of ...

    By Schramm, Inc. based in West Chester, PENNSYLVANIA (USA). from Drilling Rig Product line

  • Model TXD - Trailer Mounted Drilling Rig

    Shallow Gas - Surface Hole - CBM - Directional - Large Diameter. The TXD is the drilling contractor’s rig of choice for energy sector directional drilling and large diameter deep hole water well drilling applications requiring 200,000 lb hoist capacity. Thanks to its patented Telemast® design, the TXD offers Range III tubular capability ...

    By Schramm, Inc. based in West Chester, PENNSYLVANIA (USA). from Drilling Rig Product line

  • Model D 114.3 - D 219.1 - Overburden Drilling Systems

    Overburden Drilling Systems D 114.3 - D 219.1 with double head drilling unit (rotary/rotary). The name „Overburden Drilling” results from the composition of the earth crust. The bedrock is covered with loose layers of earth consisting of sand, gravel, boulders combined with loose soil and other deposits. All these formations are ...

    By SysBohr GmbH based in Fulda, GERMANY. from Drilling Technique Product line

  • DitchWitch - Model JT30 - Directional Drills

    Our customers wanted more power to perform all functions at once. They wanted a heavy-duty stake-down system for greater stability when boring and backreaming. They wanted greater horsepower, a higher-capacity pump, advanced electronics—and, of course, they wanted all of it to be easy to operate. Our engineers love a challenge, and you'll ...

    By Ditch Witch based in Perry, OKLAHOMA (USA). from Directional Drills Product line

  • Model GM 50 GT Combi - Soil Investigation Rig

    Multi-purpose, compact-size soil investigation rig for geotechnical and environmental drillings: small ground water pipes, sampling, weight sounding, SPT, exploratory drilling, vane test

    By Geomachine Oy based in TUUSULA, FINLAND. from Soil Investigation Drill Rigs Product line

  • Model GM 50 GT - Soil Investigation Rig

    Compact-size soil investigation rig for geotechnical and environmental drillings: ground water pipes, small sampling, weight sounding, SPT, limited exploratory drilling, vane test

    By Geomachine Oy based in TUUSULA, FINLAND. from Soil Investigation Drill Rigs Product line

  • Model GM 65 GT - Soil Investigation Rig

    Multi-purpose, mid-size soil investigation rig for all major geotechnical and environmental drillings: small ground water pipes, sampling, casing pipe drilling, weight sounding, SPT, CPT and CPT-U, exploratory drilling, vane test

    By Geomachine Oy based in TUUSULA, FINLAND. from Soil Investigation Drill Rigs Product line

  • Model CME-55 - Truck Mounted Auger Drill

    When the CME-55 first rolled off the production line back in 1963, it was an immediate success. It had the power, versatility, and dependability to handle geotechnical and medium-sized environmental jobs with maximum efficiency. Although today’s CME-55 features many refinements, it’s basically the same drill that has been the standard ...

    By Central Mine Equipment Company based in St. Louis, MISSOURI (USA). from Truck Mounted Drills Product line

  • Pionjar - Model 120 Series - Cost-Effective Environmental Drilling System

    The Pionjar 120 Drilling System is a cost-effective solution for the environmental sampling of soils between 5 to 8 meters in depth. No longer are you restricted to large, truck mounted drilling rigs on environmental projects and sensitive work sites. Accessibility to most sites is greatly improved by the portability of our drilling equipment and ...

    By Sonic Soil Sampling Inc. based in Concord, ONTARIO (CANADA).

  • Model CME-550X - Rubber Tire ATV Mounted Drill

    Ground bearing pressure of the CME-550X is only 9 psi [.632 kgf/cm2] to 11 psi [.773 kgf/cm2], depending on tools on board. Compare that to 35 psi [2.45 kgf/cm2] to 50 psi [3.5 kgf/cm2] ground bearing pressure of a truck-mounted drill. This high flotation lets you negotiate mud, snow, sand, and rocks…. all with less damage to the terrain. ...

    By Central Mine Equipment Company based in St. Louis, MISSOURI (USA). from Rubber Tire ATV Mounted Drills Product line

  • Model CME-750X - Rubber Tire ATV Mounted Drill

    The CME-750X is a 25 year veteran of the drilling industry. That means you get drilling performance and dependability, second to none.

    By Central Mine Equipment Company based in St. Louis, MISSOURI (USA). from Rubber Tire ATV Mounted Drills Product line

  • Drilling Equipment and Supplies

    Atlantic Supply stocks most needs for water well drilling, environmental drilling, geotechnical drilling, direct push and directional drilling. Our basic stock includes drill bits, bentonite drilling mud, pump and related repair parts, well casings and rods, water swivels, split spoons, augers, subs, cable tools, manholes, locking plugs, bailers, ...

    By Atlantic Drilling Supply, Inc. based in Orlando, FLORIDA (USA).

  • WellDrill - Model 3060CR - Well Drilling Rig

    Atlas copco Welldrill's WellDrill 3060CR well drilling rig is designed for all down-the-hole (DTH) drilling applications.  It is mounted on a versatile crawler track platform with high ground clearance and 360-degree rotation, which makes this unit exceptionally well suited for work in restricted areas. Ten degrees of chain feeder tilt ...

    By Atlas Copco Welltech AB based in Jonsered, SWEDEN. from WellDrill Equipment Product line

  • Elgin - Shale Shaker Screens

    Removing solids from drilling fluid is fundamental to drilling performance. Solids control has a wide range of benefits, including but not limited to: increased drilling penetration, reduction in mud costs, reduction in disposal costs, and increased bit life. By and large, increased solids removal equates to lower drilling costs for the operator.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Oil and Gas Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you