Showing results for: Environmental Regulation Equipment In United Kingdom
-
Manufactured by TQ Environmental LTDbased in UNITED KINGDOM
The 4200 system has been independently tested for Inclusion in the ECA scheme as an approved Refrigerant Gas Leak Detection System. With reliable detection levels down to 10 ppm, leaks can be detected quickly. In addition to complying with F-Gas regulations governing larger installations the TQ 4200 can save money both in reduced ...
-
Manufactured by TQ Environmental LTDbased in UNITED KINGDOM
The GD131 is a wall mounted single point, easy to use, reliable refrigerant gas leak detection system. Using infra-red gas sensors technology the GD131 is specifically designed to measure very low levels of refrigerant gas in air. It eliminates the inherent problems associated with other methods of refrigerant gas leak detection such as semi-conductor and electro-chemical sensors. The sensor is ...
-
Manufactured by TQ Environmental LTDbased in UNITED KINGDOM
Designed for both industrial and commercial use. The TQ 4300 system can monitor up to 4 different gasses simultaneously, including; Carbon Dioxide, Freon’s and Ammonia or any combination of these gasses, using our Infra-red gas analysers. In addition we can expand the system to provide individual zone alarm outputs for all 16 sample points, helping to protect personnel from hazardous ...
-
Manufactured by TQ Environmental LTDbased in UNITED KINGDOM
The GD 231 Infrared, refrigerant leak detector. Designed as a single point, stand alone sensor and alarm unit. Suitable for small installations, installed inside plant rooms or fitted to chillers etc. to provide refrigerant leak detection. Can be specifically calibrated for all common refrigerants. ...
-
Manufactured by Deso Engineeringbased in UNITED KINGDOM
Deso Adblue tanks are a reliable and cost-effective solution for storing AdBlue, ensuring a continuous supply of this essential fluid for SCR systems. With their durable construction, secure fittings, and compatibility with dispensing equipment, Deso AdBlue tanks contribute to efficient emissions control and compliance with ...
-
Distributed by Tanks`R`us Ltdbased in UNITED KINGDOM
These range of fully bunded fuel store tanks from 500 to 4500 litres are fully compliant with current environmental regulations and are suitable for a wide variety of applications. Constructed from 3mm & 4mm steel throughout, these tanks are built to withstand knocks and scrapes, unlike plastic tanks. Tough construction and ...
-
Manufactured by MYCELX Technologies Corporationbased in USA
MYCELX systems can be implemented to remedy existing oil removal equipment and systems that are failing to meet environmental discharge regulations. MYCELX systems can also extend the life and increase the efficiency of conventional ...
-
PremiumManufactured by Plasma Clean Air Ltd.based in UNITED KINGDOM
The Techniclean Canopy Mount is a slimline retro fit solution that delivers grease and odour control in commercial kitchen canopies for new build and existing kitchens. Fitted behind the canopy filters, our Techniclean Canopy Mount breaks down grease and odour to ensure extraction air is compliant with DEFRA & EMAQ guidelines and ...
-
Manufactured by LI-CORbased in USA
of gas analyzers or other precision sensors, and provide precise control over water vapor mole fraction in environmentally regulated ...
-
Manufactured by Muntersbased in USA
Ammonia is a natural residual product from livestock production and because of environmental regulations many farmers are facing limits for ammonia emission – especially when they increase their animal production. In order to make it possible for farmers to enlarge their production in areas with ammonia restrictions, Munters has ...
-
Manufactured by Bacharach, Inc.based in USA
The ECA 450 is an industrial grade analyzer ideal for professionals concerned about combustion efficiency, environmental compliance, or both. Accommodating up to seven sensors, simultaneous measurements and calculated parameters are evaluated to ensure that industrial equipment is meeting environmental regulations while burning ...
-
Manufactured by Auburn FilterSense, LLCbased in USA
The B-PAC™ controls, powered by the MICS™ platform, seamlessly collects, analyzes, and reports real-time data, ensuring strict compliance with environmental regulations. With an intuitive interface, remote access capabilities, and automated alarms, the B-PAC™ G3 is the dependable choice for industries aiming to ...
-
Manufactured by Autoflame Engineering Ltd.based in UNITED KINGDOM
For decades, boilerhouses, manufacturing plants and other industrial environments have used EGA’s (Exhaust Gas Analyser) to monitor flue emissions to comply with environmental regulations & to reduce fuel usage & emissions. The EGA EVO can operate as a standalone independent continuous monitor, or it can feed back its ...
-
ShowcaseManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Our flagship model is the i8-1000 line. It took over three years to develop and is at the forefront combustion technology, offering impressive burn rates and large batch sizes while still achieving some of the lowest emissions in its class. The i8-1000 can be customised with external cladding and automatic loading/de-ash to provide an effective and sustainable waste disposal solution for many ...
-
Manufactured by Lion Alternative Energy PLCbased in UNITED KINGDOM
Deforestation, environmental regulations related to water quality, storm water runoff, erosion control, air cleansing, etc. are reducing the amount of wood available for commercial uses. As a result, increased demand and a reduced cutting on some national forests have led to an increase in the wood fiber ...
-
Manufactured by Magnetrol, a brand of AMETEKbased in USA
The Thermatel® Model TA2 is an easy-to-use, economical, continuous gas flow meter that is often utilized to manage energy costs or to meet environmental regulations in a variety of industries. TA2 total cost of ownership is reduced through ease of installation, calibration verification in the field and reduced maintenance with no moving ...
-
Manufactured by Dürr Systems, Inc.based in USA
Dürr Part.X PW wet electrostatic precipitators are used to effectively clean industrial gases of fine particulate matter, acid mists and aerosols to meet environmental regulations and/or protect downstream equipment. The key features of Part.X PW systems include maximum removal efficiencies, reliable operation, and low operating costs, ...
-
Manufactured by Casellabased in UNITED KINGDOM
The field calibration of Sound Level Meters is an essential procedure when carrying out any type of noise survey both before and after each measurement sequence. This ensures that instruments are providing consistently accurate readings necessary for monitoring to ensure compliance with workplace and environmental noise regulations. The ...
-
Manufactured by Casellabased in UNITED KINGDOM
The field calibration of Sound Level Meters is an essential procedure when carrying out any type of noise survey both before and after each measurement sequence. This ensures that instruments are providing consistently accurate readings necessary for monitoring to ensure compliance with workplace and environmental noise regulations. The ...
-
Manufactured by Gas Data Ltd - part of the ECOTEC Groupbased in UNITED KINGDOM
Leading the field for gas measurements in site investigations, landfill gas control and environmental regulation compliance monitoring. The Gas Data GFM436 is an ATEX accredited portable gas analyser. It is designed specifically for monitoring and analysing soil gas parameters during site investigations of greenfield sites, brownfield ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you