Exhaust Air Purification Equipment Available In Canada
-
Manufactured by Adfis Products Gmbhbased in GERMANY
If, in addition to the chemical cleaning of H2S, high demands are placed on the physical adsorption capacity at the same time, then good advice is usually rare. Both, doped and impregnated activated carbon can then often exhaust their potential just ...
-
Manufactured by oxytec GmbHbased in GERMANY
The CKA air purification system consists of modules, i.e. different UV systems, which are selected and combined according to the respective requirements. The CKA modules, made of stainless steel, are sturdy, and can be installed directly into the fume hood or ventilation system near the source of the ...
-
Manufactured by Kappa Filter Systems GmbHbased in AUSTRIA
Thermal energy is a by-product of almost every single industrial production process. We support our customers in recovering and using this energy. Our experience shows: the annual energy saving potential is between 10 and 50 percent of the investment costs. Expenses usually pay themselves off within two to five ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
Exhaust air purification with heat recovery and TARCOM burner technology The Ecopure® TAR recuperative thermal exhaust air purification process is the best-proven, safest and most universally applicable incineration method, by means of which organic contaminants are transformed mainly into ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
A “Lean Line” concept based on the Ecopure® RTO was developed especially for industrial operations with low exhaust air volumes. The result is a compact system called Ecopure® CTO. The Ecopure® CTO plants are available in four sizes with cleaning capacities from approx. 5,000 Nm³/h to approx. 19,000 Nm³/h exhaust air. A high ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
The novel multi-pollutant air pollution control technology combines DeDust, DeSOx and DeNOx processes in a single catalyst coated candle filter system - the Catalytic Candle Filter (CCF). The EcopureCCF system enables the simultaneous control of dust, heavy metals, oxides of sulphur (SOx), acid gases (HCl, HF) and oxides of nitrogen (NOx) in ...
-
Manufactured by Eisenmann Environmental Technology GmbH - Deurotech Groupbased in GERMANY
The TO is capable of processing exhaust air streams with a high solvent load. The exhaust air preheater, which is used to preheat the exhaust air before it enters the combustion chamber, is an integral part of the TO. The combustion chamber is equipped with the Eisenmann BLUEMAX burner. Its use ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
EcopureLPX systems are in principle suitable for all catalytic applications. In anEcopureLPX system, the conversion of VOCs takes place at pressures slightly above or below ambient pressure. The exhaust air from the production facility is typically heated by an air-to-air heat exchanger. The air is usually then ...
-
Manufactured by Eisenmann Environmental Technology GmbH - Deurotech Groupbased in GERMANY
Unlike thermal oxidation processes, adsorption does not require chemically transforming pollutants or raising the temperature. In contrast to thermal oxidation processes, adsorption does not involve chemical transformation of pollutants or a significant increase in temperature. Adsorption makes use of the propensity of certain compounds (e.g. activated carbon or zeolite) to attract and adhere gas ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
The regenerative thermal oxidizer from type Ecopure® RTO are characterized by a cost optimized, a standardised and a low maintenance design. The most modern process technology of the Ecopure® RTO allows a economic disposal of solvent-containing and offensive odour exhaust air with a efficiency of over 99,8%. Due to different design ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
The Dürr Ecopure®RL rotary regenerative thermal oxidizers are available in pre-engineered sizes for 3,700 SCFM to 60,000 SCFM process systems. With a compact, rugged design, the unique Ecopure®RL rotary valve Ecopure®RTO is our most advanced and cost-effective way to control VOCs, HAPs and odors from industrial process exhaust streams. ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
In the light of increasingly stringent limits the safe and complete oxidation of exhaust gases and liquid residues requires special equipment that is characterised by a combination of different process measures. Besides the technical measures needed to ensure efficient combustion and safety to a high degree, increasing importance ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
For the purification of flue gases from facilities producing purified terephthalic acid - PTA for short - and other applications exhausted at a high pressure, Dürr applies theEcopureHPX abatement system as a standard. The high-pressure PTA flue gas typically contains methyl acetate, methyl bromide, and carbon monoxide can be treated ...
-
Manufactured by SH Sulphtec GmbHbased in GERMANY
. The microorganisms use the air pollutants as a source of nutrients and energy to build up their own biomass (so called biological oxidization). This natural process of biological exhaust air purification is optimally realized with the SH A-CLEAN biological ...
-
Manufactured by SH Sulphtec GmbHbased in GERMANY
With high concentrations of ammonia (NH3), hydrogen sulphide (H2S) or other pollutants, the exhaust air needs to be pre-treated before the gas is sent to the surface or container filter.The SH C-Wash from SH SULPHTEC is used for this purpose. ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
Ecopure® KPR plants transform large volumes of exhaust air with low pollutant concentrations into a small exhaust air volume with a high pollutant . Ecopure® KPR systems distinguish themselves by their intelligent modular structure and optimized accessibility. All essential individual components such as the ...
-
Manufactured by Eisenmann Environmental Technology GmbH - Deurotech Groupbased in GERMANY
Since it uses very little additional energy, regenerative thermal oxidation (RTO) is a highly efficient exhaust air clearing system. In the Eisenmann solution, the complex valve system is replaced by a special air diffuser system with rotating distributor with a high rate of availability and low maintenance. ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
EcopureFGA Scrubbing Systems can be used to remove gaseous inorganic pollutants and particles from flue gases downstream of a thermal ...
-
Manufactured by ABIONIK Group GmbHbased in GERMANY
Bioscrubbers are used for the biological purification of exhaust air and exhaust gases. For this purpose, a physical gas scrubber is combined with a biological activation unit. First, the raw gas is brought into contact with a cleaning solution in the absorber. In a second step the pollutants transferred to the scrubbing ...
-
Manufactured by Herco Kühltechnikbased in GERMANY
Condensation plants are an ideal solution for exhaust air purification in processes with low flow rates and high VOC concentrations. Primarily, the vapour pressures of the solvents to be recovered define the cooling capacity required for VOC condensation. The following applies: the cooling capacity required increases with increasing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you