Exhaust Ventilation Equipment In USA
-
Manufactured by Flow Sciences, Inc.based in USA
LEV III™ Local Exhaust Ventilation Hood designed to provide personnel protection. The enclosure features include a polypropylene structure, hinged doors, dished black phenolic base, laminated glass walls, polypropylene rear wall, and polypropylene rear plenum. Laminated glass walls and LED lighting maximize lighting across the ...
-
Manufactured by Plassonbased in ISRAEL
We offer a wide range of energy efficient fans specially designed for the Livestock industry. The fans are characterized by their compact design and available with all types of motors (Single / Three Phase, 50Hz or 60Hz, Various Voltage ...
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Premier Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Without seams, the interior has fewer points of deterioration for longer ...
-
PremiumManufactured by Labconco Corporationbased in USA
The Protector XStream Laboratory Hood takes containment, safety and energy savings to the extreme. This general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the ...
-
PremiumManufactured by Labconco Corporationbased in USA
The Axiom Class II Type C1 maximizes safety and flexibility as the first biosafety cabinet that can be used in a recirculating Type A mode for standard microbiological work or can be connected to an exhaust system to function in Type B mode for handling hazardous chemicals. The unique design includes the Chem-Zoneª, providing chemical ...
-
PremiumManufactured by Labconco Corporationbased in USA
Purifier Logic+ Class II, Type A2 Biosafety Cabinets provide personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are ...
-
Manufactured by Plastec Ventilation Inc.based in USA
Storm 18 High Static Pressure Direct Drive Forward Curve Polypropylene Blower With High Chemical Resistance. Storm 18 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This ...
-
Manufactured by Plastec Ventilation Inc.based in USA
Storm 12 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum ...
-
Manufactured by Plastec Ventilation Inc.based in USA
Storm 10 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum ...
-
Manufactured by Ecogate Inc.based in USA
Ecogate blast gates open automatically to machines that need exhaust ventilation and close automatically to machines that do not need exhaust ventilation at that particular point of time. This results in reliable dust collection that provides better suction, reliability, performance, and ...
-
Manufactured by Kitagawa America LLCbased in USA
Flow visualization is common for air flow check in room and function check of local exhaust ventilation, but heat source is not suitable. The Model AS-1 is designed to check velocity and direction of air flow with a smoke tube (No.301) which reacts with vapour in the air and generates white ...
-
Manufactured by Kitagawa America LLCbased in USA
Flow visualization is common for air flow check in room and function check of local exhaust ventilation, but heat source is not suitable. The Model AS-2 is designed to check velocity and direction of air flow continuously with a smoke tube (No.301) which reacts with vapour in the air and generates white smoke. ...
-
Manufactured by Kitagawa America LLCbased in USA
For flow visualization check of air flow at room or local exhaust ventilation. Used with Kitagawa Air Flow Indicator Model AS-1/AS-2/AS-3. Meets OSHA protocol for respirator fit ...
-
Manufactured by SEDA Umwelttechnik GmbHbased in AUSTRIA
Secure neutralizing. Dust-free and silenced. Safety lock. Easy to use. Connector for 3 times airbag neutralization. Filter ventilation or exhaust pipe to the ...
-
Manufactured by Kemper GmbHbased in GERMANY
KemJET is a central ventilation system for workshops where local exhaust ventilation systems are not feasible or it is used to supplement such systems. It effectively protects employees and machines from fine dust. The heated, purified air remains in the room, so that in the winter heat from the heating system is retained. This, way large ...
-
Manufactured by Nailor Industries, Inc.based in USA
performance where a 2" (51), 4" (102) or 6" (152) louver is not practical. Suitable for use in ventilation, exhaust and low to medium velocity intake applications, ideal for use in thin wall and curtain wall applications or A/C units where a full depth louver cannot be used. Available in 1 1/4" (32) deep flanged frame that installs easily in most common ...
-
Manufactured by Moffitt Corporationbased in USA
The MoffittVent is the most effective and efficient natural ventilation device on the market today. This popular ridge ventilator exhausts large volumes of warm air without letting any rain in. Wind direction and velocity do not negatively affect performance. In fact, higher winds can actually improve ventilation in many ...
-
Manufactured by Nailor Industries, Inc.based in USA
is not a primary concern, with low pressure drop characteristics and a high free area. Standard concealed architectural mullions allow for a smooth, continuous look. Reinforcing bosses run the full length of each blade for superior strength. Suitable for use in ventilation, exhaust and low to medium velocity intake applications, ideal for use in specialty ...
-
Manufactured by GMC AIRbased in USA
Standard Material: Aluminum Profile. Usable for fresh air intakes, air exhausts, places where natural ventilation is needed and air volume control and direction are not. Has three models: Z-type Standard Bladed (EXL-161), Curvilinear type Standard Bladed (EXL-261), Z- Type Wide Bladed (EXL-361) and Circular External Louver (EXL-461). ...
-
Manufactured by Plastec Ventilation Inc.based in USA
Designed to exhaust fumes from highly corrosive environments with 4 sizes available from 3” to 6” inlet/outlet. It is an excellent system for Scrubber Applications and other systems requiring low airflow at higher static pressure. Suitable for many applications such as acid tank ventilation, hood exhaust, commercial washers ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you