We couldn't find any expansion joint equipment suppliers or service providers located in Cayman Islands

Here is a list of equipment results with suppliers serving Cayman Islands

Expansion Joint equipment available in Cayman Islands

  • Premium

    Proco - Model Series 231/ET - PTFE Lined Rubber Expansion Joints

    The PROCO 231/ET Lined Expansion Joints are designed for tough, demanding, corrosive chemical applications such as chemical and petrochemical process facilities and highly corrosive industrial piping and pollution control systems. Use of the 231/ET expansion joints is especially prevalent in the paper industry, where their ability to resist ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from PTFE Expansion Joints Product line

  • Premium

    PROCO - Model Series 261R - Rubber Expansion Joints

    The PROCO Series 261R Wide Arch Expansion Joint is specifically designed for use with Plastic or FRP Piping Systems. A replacement for the standard spool-type expansion joints, the PROCO 261R has exceptionally low spring rates compared to its conventional counterparts. With its low forces to compress, extend or laterally offset, the PROCO Series ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Others Product line

  • Premium

    Proco - Model Style 440-BE - Molded PTFE Expansion Joints

    The Proco Style 440 BE Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. Wherever metallic joints, lap joints, or PTFE and FEP-lined ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Others Product line

  • Premium

    Proco - Model Style 251/BT - PTFE & FEP Lined Rubber Expansion Joint

    The Proco Series 251/BT Lined Expansion Joints are designed for tough, demanding, corrosive chemical applications such as chemical and petrochemical process facilities and highly corrosive industrial piping and pollution control systems. Use of the 251/BT expansion joints is especially prevalent in the paper industry, where their ability to ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from PTFE Expansion Joints Product line

  • Premium

    Proco - Model Style 240 - Molded Single Sphere Expansion Joint

    Proco Series 240 expansion joints are molded single-sphere arch expansion joints which are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular movement. Their easy installation makes them the logical choice for even the toughest jobs.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Spherical Product line

  • Premium

    Proco - Model Style 242 - Molded Double-Sphere Expansion Joint

    Proco Series 242 expansion joints are molded double-sphere arch expansion joints which are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular movement. Their easy installation makes them the logical choice for even the toughest jobs.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Spherical Product line

  • Premium

    Proco - Model Style 271 - Super Wide Arch Expansion Joint

    The Proco Style 271 rubber expansion joint is a single super-wide flowing arch design. It’s self-cleaning, which eliminates the need for a filled arch design and makes it the perfect choice for slurries. The Style 271 can replace and be interchanged with hand-built narrow/wide arch, molded wide arch, and spherical type expansion joints.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Rubber Spool Type Product line

  • Premium

    Proco - Model Style 232 - Double Wide-Arch Expansion Joint

    Proco Style 232 expansion joints are built to withstand even the most rigorous piping system configurations. They are double wide-arch products, specifically constructed to reduce or eliminate common occurrences such as noise and vibration, misalignment/offset, or turbulence. Style 232 expansion joints are appropriate for a wide variety of ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Rubber Spool Type Product line

  • Premium

    Proco - Model Style 231 - Single Wide-Arch Expansion Joint

    Proco Style 231 expansion joints are built to withstand even the most rigorous piping system configurations. They are single wide-arch products, specifically constructed to reduce or eliminate common occurrences such as noise and vibration, misalignment/offset, or turbulence. Style 231 expansion joints are appropriate for a wide variety of ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Rubber Spool Type Product line

  • Premium

    Proco - Model Style 233 - Triple Wide-Arch Expansion Joint

    Proco Series 230 Rubber Expansion Joints are designed for piping systems to absorb pipe movements, relieve stress, reduce system noise/vibration, compensate for misalignment/offset and to protect rotating mechanical equipment against start-up surge forces. Proco Style 233 and 233FA: Triple wide-arch product where most movement is needed. Available ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Rubber Spool Type Product line

  • Premium

    Proco - Model Style RC -231 - Concentric Single Wide-Arch Expansion Joint

    Proco Style RC-231 wide arch expansion joints are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional movements.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Rubber Spool Type Product line

  • Premium

    Proco - Model Style RE-231 - Eccentric Single Wide-Arch Expansion Joint

    Proco Style RE-231 wide arch expansion joints are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional movements.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Rubber Spool Type Product line

  • Premium

    Proco - Model Style 261R - Molded Wide Arch Expansion Joint for Plastic/FRP Piping Systems

    Proco Series 261R wide arch expansion joints have the lowest spring rates of any expansion joints currently on the market. They also boast low forces to deflect, and are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Integral Molded Flanged Wide Arch Product line

  • AGS - Model Style W155 - Expansion Joint

    Pressure rated to conform to the pressure ratings of Victaulic Style W77/W07 AGS couplings. Supplied with AGS grooves to permit fast installation without field preparation. Advance Groove System (AGS) products must not be used to join original groove system (OGS) products.

    By Victaulic Company based in Easton, PENNSYLVANIA (USA). from Expansion Joints Product line

  • Premium

    Proco - Model Style 262R - Molded Wide Double Arch Expansion Joint for Plastic/FRP Piping Systems

    Proco Series 262R wide arch expansion joints have the lowest spring rates of any expansion joints currently on the market. They also boast low forces to deflect, and are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Integral Molded Flanged Wide Arch Product line

  • BELPAFLEX - Expansion Joints

    Expansions joints designed to general applications with high temperatures, where exist high movements and pressures less than 1 bar (Power plants, incinerators, cement plants, petrochemicals, foundries …). Temperatures

    By Montero Fye S.A based in BARACALDO, SPAIN. from Expansion Joints Product line

  • Dog Bone - Expansion Joint

    The Dog Bone Type Expansion Joint is used as flexible connection between Turbines and Condensers. This turbine exhaust expansion joint is used as a flexible connection in power plants and it is the most widely used turbine to condenser expansion joint in use.

    By Macoga S.A based in Ordes (A Coruña), SPAIN. from Rubber Expansion Joints- Especific Purposes Product line

  • Expansion Joints

    Rubber, Fabric, PTFE, Stainless Steel. Connectors: Flange, threaded and welding ends. Movement capacity: Lateral, angular, axial. DN 15 - 6000, PN 1 -100

    By Schwietzke Armaturen GmbH based in Bottrop, GERMANY.

  • BELPAPLEX - Model S - Fabric Expansion Joint

    Expansions joints designed to applications in not agresive working environments, mainly used with air (Ventilation, air conduction, fan, separators). Tª < 350ºC without bolster. Rectangular & round manufacturing. Pressures up to 0,5 bar and depression. Possibility of using with bolster and deflectors (steels components).

    By Montero Fye S.A based in BARACALDO, SPAIN. from Expansion Joints Product line

  • Expansion Joints

    An Expansion Joint is a device used to relieve stresses in piping/ducting systems, vessels and/or chutes by absorbing dimensional changes in single and/or multiple planes, which are caused by thermal expansion and vibration. When designing an Expansion Joint into any system, it is very important to know the operating conditions in each and every ...

    By Vibrant Power Inc based in Mississauga, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you