expansion joint Equipment in Wisconsin

  • Cretex - Internal Joint Seal

    The Internal Joint Seals are watertight compression seals that reduce groundwater infiltration, increasing waste water treatment capacity in underground pipes. Made of 7.5' high quality rubber, Internal Joint Seals meet or exceed the physical requirements of ASTM C-923. The stainless steel expansion band to be used meets or exceeds ASTM A-240, ...

    By Cretex Specialty Products based in Waukesha, WISCONSIN (USA).

  • Premium

    Sauereisen - Model No. 69 - Elastomeric Joint Compound

    Sauereisen Elastomeric Joint Compound No. 69 is used as a flexible expansion joint in acid pickling tanks; in concrete, brick and tile floors; for sealing joints of ducts and conduits; and for general caulking and sealing where permanent flexibility and adhesion are required, along with resistance to mineral acids and alkalies. No. 69 is not ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Accessory Materials Product line

  • d-Rain Joint™ - Pavement Rainwater Filtration System

    d-Rain Joint™ Pavement Rainwater Filtration System designed for onsite rainwater management. The d-Rain Joint™ system is a highly effective and unique design that allows the use of traditional concrete, asphalt or paver type materials to construct a high performing permeable, pervious surface system. As an exterior, linear filter drain ...

    By Bio-Microbics, Inc. Distributor in Fredonia, WISCONSIN (USA). from BioSTORM Stormwater Treatment Systems Product line

  • Spiral-Wound

    TANN Corporation can provide insulated and/or non-insulated spiral-wound duct for process exhaust streams and heat recovery systems. Ductwork systems can include test ports, expansion joints and inspection ports.

    By L&E America based in Kaukauna, WISCONSIN (USA). from Ductwork Product line

  • Catalytic Oxidizers

    Catalytic Oxidizer AirflowCatalytic Oxidizers from The CMM Group, LLC are designed to destroy air pollutants emitted from process exhaust streams at temperatures ranging from 260°C (500°F) to 345°C (650°F). Catalytic oxidizers utilize a high-efficiency counter-flow plate type heat exchanger. Oxidation is achieved as pollutants pass ...

    By The CMM Group, LLC based in De Pere, WISCONSIN (USA). from Oxidizers Product line

  • Thermal Recuperative Oxidizer

    Thermal Recuperative Oxidizers (TO’s) from The CMM Group destroy air pollutants emitted from process exhaust streams at temperatures ranging from 760°C (1,400 F) to 815°C (1,500 F). Thermal Recuperative Oxidizer’s utilize a multi-pass shell-and-tube type heat exchanger, which is fabricated of heavy-duty stainless steel. ...

    By The CMM Group, LLC based in De Pere, WISCONSIN (USA). from Oxidizers Product line

  • Premium

    Sauereisen - Model No. 165 - Epoxy Polymer Concrete for General Purpose

    General purpose epoxy with excellent physical properties. Sauereisen Epoxy Polymer Concrete No. 165 is a castable material for the chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, floors, and structural support columns or bases. No. 165 has been specifically formulated for foundation construction and should be ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Polymer Concretes Product line

  • Premium

    Sauereisen - Model No. 265 - Epoxy NovolaK Polymer Concrete

    Top grade epoxy for physical strength and resistance to most chemicals. Sauereisen Epoxy NovolaK Polymer Concrete No. 265 is a castable for the chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, floors, and structural support columns or bases. No. 265 has been specifically formulated for foundation construction ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Polymer Concretes Product line

  • Premium

    Sauereisen - Model ConoPrime No. 502 - Ttwo-part Epoxy Primer

    Sauereisen ConoPrime No. 502 is a two-part epoxy primer to be used in conjunction with the Sauereisen ConoFlex No. 381. Recommended for use on concrete and various substrate types. Formulated to provide a chemical bond with ConoFlex Urethane No. 381. ConoPrime No. 502 is specifically formulated to easily penetrate concrete substrates. It is ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Primer Product line

  • Premium

    Sauereisen - Model PenePrime No. 500 - Water-borne Epoxy Primer

    PenePrime No. 500 is a water-borne epoxy primer to be used in conjunction with the Sauereisen line of coatings, linings and flooring materials. PenePrime is specifically formulated to penetrate deep within concrete substrates. It is recommended to ensure maximum adhesion where conventional primers may not easily penetrate, or where solvent thinned ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Primer Product line

  • Premium

    Sauereisen - Model FibreCrete No. 218 - Epoxy Novolak Fiber-Reinforced Lining System

    FibreCrete No. 218 is an Epoxy Novolak fiber-reinforced lining system used to protect concrete and steel from chemical and physical abuse. The inter-locking fiber matrix of the FibreCrete System exhibit outstanding flexural and tensile strength.

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Linings Product line

  • Premium

    Sauereisen - Model No. 465 - NovolaK Vinyl Ester Polymer Concrete

    Sauereisen NovolaK Vinyl Ester Polymer Concrete No. 465 is a castable for the construction of chemical-resistant sumps, dikes, containment areas, trenches, walls, and structural support columns or bases. No. 465 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Polymer Concretes Product line

  • Premium

    Sauereisen SewerGard - Model No. 210T - Trowel Applied Polymer Lining for Municipal Wastewater

    Sauereisen SewerGard No. 210 is an aggregate-filled epoxy material. This lining system is specifically designed to protect concrete surfaces of municipal wastewater treatment structures and collection systems from chemical attack and physical abuse. No. 210's nonsagging application properties permit economical repair and protection of vertical, ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Linings Product line

  • Premium

    Sauereisen SewerGard - Model No. 210FS - Fast-Setting Epoxy Material for Use in Municipal Wastewater Environments

    New fast-setting SewerGard enables limited downtime. Sauereisen SewerGard No. 210FS is a fast-setting epoxy material for use in municipal wastewater environments. This lining protects concrete surfaces from chemical attack and physical abuse. It is particularly useful for protection of manhole benches, inverts and other structures subject to very ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Linings Product line

  • Premium

    PenePrime - Model No. 500 - Water-Borne Epoxy Primer

    PenePrime No. 500 is a water-borne epoxy primer to be used in conjunction with the Sauereisen line of coatings, linings and flooring materials. PenePrime is specifically formulated to penetrate deep within concrete substrates. It is recommended to ensure maximum adhesion where conventional primers may not easily penetrate, or where solvent thinned ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Accessory Materials Product line

  • Premium

    Sauereisen - Model FibreCrete AR No. 206 - Fiber-Reinforced, Chemically-Resistant and Epoxy Lining System

    FibreCrete - AR No. 206 is a fiber-reinforced, chemically-resistant, 100% solids, epoxy lining system used to protect concrete and steel tanks, scrubbers, ductwork and other vessels from abrasion and chemical and physical abuse. The interlocking fiber matrix of FibreCrete systems exhibit outstanding flexural and tensile strengths. Fibrecrete AR ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Linings Product line

  • Premium

    Sauereisen - Model FibreCrete No. 203 - General Purpose for Spray-Applied Fiber-Reinforced Epoxy Lining

    General purpose, spray-applied fiber-reinforced epoxy lining. FibreCrete - General Purpose No. 203 is a fiber-reinforced, chemically-resistant, 100% solids, epoxy lining system used to protect concrete and steel from chemical and physical abuse. The interlocking fiber matrix of FibreCrete systems exhibits outstanding flexural and tensile ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Linings Product line

  • Premium

    Sauereisen - Model No. 54 SG - Acidproof Concrete - Structural Grade

    Potassium silicate that withstands extreme temperatures and acid concentrations. Sauereisen Acidproof Concrete No. 54 SG - Structural Grade is a potassium silicate castable refractory for chemical resistant construction of sumps, dikes, containment pads, trenches, walls and other structural support columns or bases. Since No. 54 SG is fast-setting ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Polymer Concretes Product line

  • Premium

    Sauereisen - Model ConoWeld No. 501 - Primer

    ConoWeld No. 501 is a primer to be used in conjunction with the Sauereisen line of epoxy coatings, linings and flooring materials. ConoWeld No. 501 is applied by spray, brush or roller over concrete and steel. This primer is an integral part of the Sauereisen lining system in that it seals porous substrates and promotes adhesion of the specified ...

    By Sauereisen Inc. Distributor in Germantown,, WISCONSIN (USA). from Primer Product line

  • Model 50G - Compact Excavator

    Looking to get more out of your “mini ex”? Make your next compact excavator one of our G-Series. Inspired by input from equipment owners and operators like you, this 50G Compact Excavator is loaded with customer-driven enhancements. Such as a more spacious cab with a wider entryway. Larger expanse of glass for unsurpassed visibility. ...

    By John Deere Distributor in WISCONSIN (USA). from Excavators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you