Showing results for: Explosive Gas Equipment
-
PremiumManufactured by Environics, Inc.based in USA
Some research and industrial applications call for the dilution of explosive gases at high concentrations. Most often, this is in order to calibrate gas detectors. To meet these unique needs, Environics designed a modified version of our Series 4040 gas dilution system which included a dual chassis ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. The Acme 40-ST Combustible Gas sensor is explosion-proof. The enclosure of the sensor/transmitter is an explosion-proof ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The ExDetector SC 220 detects combustible gases and vapors within a range of 0 %-50 % LEL. It uses a rugged semiconductor gas sensor. It is often a practical alternative to sensors that cannot be used in atmospheres with catalyst poisons. The ExDetector SC 220 may be used as a stand-alone device, i.e. it can trigger safety responses ...
-
Manufactured by Van Air Systemsbased in USA
Van Air Systems HLSXG regenerative desiccant natural gas dryers deliver extremely dry gas in the harshest and most challenging operating environments, where safety and performance are of central importance. HLSXG dryers are explosion proof and have been designed to operate in areas classified as hazardous, Class 1 Division 1, Groups C & ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The ExDetector HC 100 is used to measure the current concentration of explosive gases and vapors. The ExDetector HC 100 detects combustible gases and vapors within a range of 0 %-100 % LEL. It uses the principle of catalytic combustion (heat of reaction), which allows it to monitor many different gases such as hydrogen and ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The combination of the ExDetector HC 100-T and HC 100-K was specially designed for installation in ducts and features a remote transmitter. This special combination is used to measure the current concentration of explosive gases and vapors in a pipe network. The HC 100-K measures combustible gases and vapors within a range of 0 %-100 % ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The ExDetector HC 150-K is designed for use in ducts. It is used to measure the current concentration of explosive gases and vapors. The ExDetector HC 150-K detects explosive gases and vapors within a range of 0 %-100 % LEL. It uses the principle of catalytic combustion (heat of reaction). It also satisfies all the criteria for use in ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The ExDetector HC 200 is used to measure the current concentration of explosive gases and vapors. The ExDetector HC 200 detects combustible gases and vapors within a range of 0 %-100 % LEL. It uses the principle of catalytic combustion (heat of reaction). The ExDetector HC 200 may be used as a stand-alone device, i.e. it can trigger ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The ExDetector IR HC detects combustible gases and vapors within a range of 0 %-100 % LEL. It uses an infrared gas sensor. The ExDetector IR HC is ideal in atmospheres containing catalyst poisons which prevent the use of other sensors. The ExDetector IR HC is also suitable for use in explosion zone ...
-
Manufactured by AIRSENSE Analytics GmbHbased in GERMANY
The GDA-X is the newest addition to our successful GDA series. The GDA-X has the same scope of work as the GDA-FR, which is able to detect chemical substances and dangerous gaseous compounds, with an improved mode of operation for detecting slow-evaporating substances including many ...
-
Manufactured by Structured Materials Industries, Inc.based in USA
SMI works with a broad range of toxics. Gas monitors to detect, measure, and monitor toxics, flammable, and explosive gases. Examples of censors are shown in the images. SMI routinely integrates one to several sensors in its systems-interlocking signals with the control and safely interlock ...
-
Manufactured by Binder Group GmbHbased in GERMANY
The field transmitters of the COMBIMASS basic series are suitable for flow rate measurement of compressed air and technical gases at medium temperatures up to 130°C and gas pressures up to 40 bar. The electronics of the COMBIMASS basic is located in a dual compartment aluminium enclosure. Typical applications are: compressed air – ...
-
Manufactured by US Chemical Storage - A Justrite® Group Companybased in USA
Explosion Proof Gas Sensor. Explosion Proof Gas Sensor with Calibration Kit. Class 1 Div 1 Groups A,B,C & D. Provided for any stored ...
-
Manufactured by Geopal System A/Sbased in DENMARK
Geopal detector GJ-EX is an explosion-proof detector certified for use in zone 1. GJ-EX is made of robust materials for use in aggressive environments and can be fitted with different sensors according to the target gas. For use at temperatures up to 80 ° C. Fits GJD-02C, GJD-04C, GJ-03R, GP-SA-2, GJD-L3C and GP-AMP depending on the ...
-
Manufactured by Aerionics, Inc.based in USA
The new EX Series of Explosion Proof Gas Detectors are used for applications that require a more rugged enclosure and meet Class 1 Division 1 ...
-
Manufactured by FER Strumenti Srlbased in ITALY
Explosion detector based on a pellistor sensor. This device is designed to detect concentrations with a predetermined 5% threshold of the LEL (Lower Explosive Limit) which is 0.25% by volume for CH4. It is based on a catalytic oxidation sensor expressly designed for the measurement of combustible ...
-
Manufactured by Noventis Australia Pty Ltdbased in AUSTRALIA
are valued, for example in the automotive and aerospace manufacturing sectors, on scientific and research facilities and in high-utilisation medical, civil or commercial plants. GDA fixed gas detectors are designed for detection of explosive gases, toxic gases or oxygen. Units are available in flameproof, intrinsically safe or safe area formats for ...
-
Manufactured by Geopal System A/Sbased in DENMARK
Geopal detector GJ-EX 150 is an explosion-proof detector certified for use in zone 1. GJ-EX 150 is made of robust materials for use in aggressive environments and can be fitted with different sensors according to the target gas. For use at temperatures between 100 oC og 150 oC. Fits GJD-02C, GJD-04C, GJ-03R, GP-SA-2, GJD-L3C and ...
-
Manufactured by Critical Environment Technologies Canada Inc. (CETCI)based in CANADA
The CXT2 Explosion Proof transmitter is a single channel transmitter that reliably and accurately monitors toxic, oxygen, combustible, VOC or CO2 gas concentrations in potentially explosive and harsh environments, including classified hazardous rated areas. It can be connected to a controller (FCS), a control panel or a BAS / BMS / DDC ...
-
Manufactured by Conspec Controls Limitedbased in CANADA
CONSPEC’s CX Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CX Series is a simple and “smart” gas detector designed for use in hazardous or classified locations. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS system. A ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you