Showing results for: Explosive Gas Equipment In Asia & Middle East
-
PremiumManufactured by Environics, Inc.based in USA
Some research and industrial applications call for the dilution of explosive gases at high concentrations. Most often, this is in order to calibrate gas detectors. To meet these unique needs, Environics designed a modified version of our Series 4040 gas dilution system which included a dual chassis ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. The Acme 40-ST Combustible Gas sensor is explosion-proof. The enclosure of the sensor/transmitter is an explosion-proof ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The ExDetector HC 100 is used to measure the current concentration of explosive gases and vapors. The ExDetector HC 100 detects combustible gases and vapors within a range of 0 %-100 % LEL. It uses the principle of catalytic combustion (heat of reaction), which allows it to monitor many different gases such as hydrogen and ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The ExDetector SC 220 detects combustible gases and vapors within a range of 0 %-50 % LEL. It uses a rugged semiconductor gas sensor. It is often a practical alternative to sensors that cannot be used in atmospheres with catalyst poisons. The ExDetector SC 220 may be used as a stand-alone device, i.e. it can trigger safety responses ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The ExDetector HC 150-K is designed for use in ducts. It is used to measure the current concentration of explosive gases and vapors. The ExDetector HC 150-K detects explosive gases and vapors within a range of 0 %-100 % LEL. It uses the principle of catalytic combustion (heat of reaction). It also satisfies all the criteria for use in ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The combination of the ExDetector HC 100-T and HC 100-K was specially designed for installation in ducts and features a remote transmitter. This special combination is used to measure the current concentration of explosive gases and vapors in a pipe network. The HC 100-K measures combustible gases and vapors within a range of 0 %-100 % ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The ExDetector IR HC detects combustible gases and vapors within a range of 0 %-100 % LEL. It uses an infrared gas sensor. The ExDetector IR HC is ideal in atmospheres containing catalyst poisons which prevent the use of other sensors. The ExDetector IR HC is also suitable for use in explosion zone ...
-
Manufactured by Bieler Lang GmbHbased in GERMANY
The ExDetector HC 200 is used to measure the current concentration of explosive gases and vapors. The ExDetector HC 200 detects combustible gases and vapors within a range of 0 %-100 % LEL. It uses the principle of catalytic combustion (heat of reaction). The ExDetector HC 200 may be used as a stand-alone device, i.e. it can trigger ...
-
Manufactured by AIRSENSE Analytics GmbHbased in GERMANY
The GDA-X is the newest addition to our successful GDA series. The GDA-X has the same scope of work as the GDA-FR, which is able to detect chemical substances and dangerous gaseous compounds, with an improved mode of operation for detecting slow-evaporating substances including many ...
-
Manufactured by Binder Group GmbHbased in GERMANY
The field transmitters of the COMBIMASS basic series are suitable for flow rate measurement of compressed air and technical gases at medium temperatures up to 130°C and gas pressures up to 40 bar. The electronics of the COMBIMASS basic is located in a dual compartment aluminium enclosure. Typical applications are: compressed air – ...
-
Manufactured by Conspec Controls Limitedbased in CANADA
CONSPEC’s CX Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CX Series is a simple and “smart” gas detector designed for use in hazardous or classified locations. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS system. A ...
-
Manufactured by Nanjing Kelisaike Safety Equipment Co., Ltd.based in CHINA
K800 series fixed gas detector, with 2, 3 or 4 wires connection, 4-20 mA RS485 Modbus output, provides continuous detection and monitoring of gases for a wide range of industrial environments. With an in-built alarms and fault relays, it is suitable for safety protection of personnel and plant from flammable, toxic and oxygen gases. ...
-
Manufactured by DOD Technologies Incbased in USA
The GT2000TX Explosion-Proof Toxic Gas Monitor provides comprehensive monitoring of toxic and oxygen gas hazards in potentially explosive atmospheres (both indoors and outdoors). Users can modify detector operation using the LCD without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces ...
-
Manufactured by DOD Technologies Incbased in USA
The GT2000EX Explosion-Proof Combustible Gas Monitor provides comprehensive monitoring of flammable gas hazards in potentially explosive atmospheres (both indoors and outdoors). Users can modify detector operation using the LCD without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces ...
-
Manufactured by JXCTbased in CHINA
The explosion-proof methane gas sensor adopts industrial-grade high-definition interface, and the shell adopts die-casting aluminum technology. It has the advantages of waterproof, dustproof, explosion-proof and anti-condensation. 15 seconds quick response, more accurate detection, guaranteed ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
. To meet the different requirements of industrial field and laboratory measurement, it is widely used in gas detection and analysis in fields such as fumigation, chemical industry, coal mine, medical treatment, and ...
-
PremiumManufactured by Testo, Inc.based in USA
When house owners notify the network operator or fitter that they can clearly smell gas in the house, a highly explosive gas concentration may already be present (4–17%). The fitter has to use a gas detector to check sections of gas pipes for leak tightness to locate possible ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Plastic Porcelain No. 30 is an inorganic, chemically-setting, magnesium oxide base material which expands slightly while hardening to a porcelain-like body. No. 30 is used for assembling silverware and cutlery, insulating lead wires on electrical fixtures and sealing conduits to prevent the spread of explosive ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's E2T Pulsar 4 instruments provide infrared thermometry for sulfur reactors and other high-temperature furnaces in temperatures between 350 to 2000°C. Single channel standard model programmable for gas or refractory measurement. Two channel advanced model with simultaneous measurement of refractory and gas ...
-
PremiumManufactured by ENVEAbased in FRANCE
ENVEA UK has developed a range of rugged sensor options for its probe electrification instruments. These enable ENVEA UK's Electrodynamic™ particulate measurement range of instruments to be used in some challenging industrial applications and combine the benefits of an Electrodynamic™ measurement of dust (application dependent) with long term robust ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you