Showing results for: Explosive Gas Equipment Near Liberia
-
PremiumManufactured by ENVEAbased in FRANCE
ENVEA UK has developed a range of rugged sensor options for its probe electrification instruments. These enable ENVEA UK's Electrodynamic™ particulate measurement range of instruments to be used in some challenging industrial applications and combine the benefits of an Electrodynamic™ measurement of dust (application dependent) with long term robust ...
-
PremiumManufactured by ENVEAbased in FRANCE
Paddy has been developed to supply a trending information of pulverization. It measures changes in particle size for instance to detect screen breaks. Paddy is insensitive against contaminations and works without a ...
-
Manufactured by Ekommerce Srlbased in ITALY
UV trap against explosive dust and gas. ATEX 36 is the UV trap in designed for environments with a high risk of explosion. Equipped with ATEX protection for gas and dust (Area 1, 2, 21, 22). ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Capacity range of single head pump: 1 – 60 l/h; 25 – 1 bar - The diaphragm metering pump EXTRONIC is perfectly suited to the sensitive application of liquid media in facilities at risk of gas explosions as it is approved in compliance with the EU EX Regulation 2014/34/EU ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The premium system for gas analysis and volume measuring supporting professional process optimisation. All plant operators producing electricity from biogas, sewage gas or landfill gas aim to optimize processes and thus ensure greater efficiency – in other words, obtain as much methane as possible. At the same time, however, ...
-
Manufactured by Resistencias Tope, SAbased in SPAIN
ATEX Industrial convectors for space heating in explosive atmosphere gas (areas 1 or 2) or dust (areas 21 or ...
-
Manufactured by Resistencias Tope, SAbased in SPAIN
ATEX Industrial fan heaters for space heating in explosive atmosphere gas (areas 1 or 2) or dust (areas 21 or ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Designed for use in Zone 1 or Zone 2 hazardous areas, the air aspirated system uses a compressed air driven vacuum generator to draw a gas sample from a single point. Explosion- proof gas detectors are fitted to monitor for flammable gases, toxic gases or oxygen. Each detector provides a 4-20mA output. An intrinsically safe flow-fail device ...
-
Manufactured by Industrial Physics Product Integrity Limitedbased in UNITED KINGDOM
Paramagnetic oxygen analyzers for high purity oxygen with full percent range capability. Utilising the well proven magneto-dynamic (dumb bell) transducer, the PM700 offers the best in class of high performance oxygen analysis. These highly advanced instruments incorporate user-friendly software to provide accurate and reliable results. This paramagnetic analyzer is ideal for oxygen purity ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4040 VOC Gas Dilution System is a microprocessor based gas dilution system specifically designed for the preparation of calibration standards used for VOC (Volatile Organic Compounds) monitoring programs. This system stands out from competitors in its ability to generate infinitely varied concentrations ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of calibration gases is assured with the Series 4040 Ultra-High Purity (UHP) Gas Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal system for providing ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Series 4000 UHP Gas Mixing System combines the accuracy and repeatability of the Series 4000 with a welded, Ultra-High-Purity (UHP) construction. All units are optimized for your target gases. With all metal seals, units are commonly used for both research & development and/or production applications, including ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of gas blends is assured with the Series 4020UHP Ultra-High Purity Gas Mixing/Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal system for providing ...
-
PremiumManufactured by Environics, Inc.based in USA
The Series 4000 consists of a single chassis now supporting up to eight mass flow controllers. The mass flow controllers are factory calibrated using a primary flow standard traceable to the United States National Institute of Standards and Technology (NIST). Each flow controller utilizes an 11 point calibration table with linear interpolation, to increase accuracy and reduce flow controller ...
-
PremiumManufactured by Environics, Inc.based in USA
Some research and industrial applications call for the dilution of explosive gases at high concentrations. Most often, this is in order to calibrate gas detectors. To meet these unique needs, Environics designed a modified version of our Series 4040 gas dilution system which included a dual chassis ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. The gas mixes can be used in generating precise gas calibration standards, creating gaseous atmospheres or producing gas mixes for analytical ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4020 can mix up to seven (7) component gases simultaneously to generate precise gas calibration standards and gaseous atmospheres in a broad dynamic range. The dilution capabilities of the Series 4020 allows dilution ratios from 1:1 to 10,000:1 (with larger ranges possible, depending on the configuration of the ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Automotive Gas Divider is an advanced instrument for the dynamic calibration of automotive or mobile source emissions analyzers. This system stands out from competitors in its ability to generate infinitely varied concentrations within the operating range of the instrument, protecting your investment and giving you the ...
-
Manufactured by AIRSENSE Analytics GmbHbased in GERMANY
The GDA-X is the newest addition to our successful GDA series. The GDA-X has the same scope of work as the GDA-FR, which is able to detect chemical substances and dangerous gaseous compounds, with an improved mode of operation for detecting slow-evaporating substances including many ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The BIOMETHANE 3000 is designed for high accuracy methane and oxygen readings for biomethane ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you