Showing results for: Extractive Gas Analyzer Equipment In Asia & Middle East
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
Protea P300 is an infra-red (IR), extractive multi component analyser to provide analysis of up to six gas-phase or liquid process ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-450 Laser Gas Analyzer is a kind of 4U in-place tunable laser gas analyzer targeting at industrial online monitoring and ambient environment online monitoring. It adopts TDLAS Technology, which can scan specific absorption peak of the measured gas (without background gas absorption) and the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
Protea’s gas analysers are extractive gas analysers and as such we need to ensure repeatable, consistent sample flow is provided to the equipment. The choice of pump is of great importance to ensure high uptime of analytical equipment. Protea can supply low-cost, low flow sample pumps for mobile applications. For sampling of corrosive ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The CEM400 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all the ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The EXM400 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all the ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The CEM500 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. This new model is based on a 2048 pixels CCD (charge-coupled device) giving a higher resolution (0.1 nm) and a longer lamp life time (3 years) It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The EXM500-L is an extractive online gas analyser for Continuous emission monitoring (CEMS). It is specifically dedicated to the new low level emission Regulations known as 50/30/5/3 (50 mg/Nm3 NOx, 30 mg/Nm3 SO2, 5 mg/Nm3 particles, 5 μg/Nm3 mercury) anda lso to chemical processes requiring low values of H2S. This new model is based on a ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The CEM500-L is an extractive online gas analyser for Continuous emission monitoring (CEMS). It is specifically dedicated to the new low level emission Regulations known as 50/30/5/3 (50 mg/Nm3 NOx, 30 mg/Nm3 SO2, 5 mg/Nm3 particles, 5 μg/Nm3 mercury) and also to chemical processes requiring low values of H2S. This new model is based on a ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The EXM 500 is an extractive on-line gas analyser dedicated to continuous emission monitoring (CEM). This new model is based on a 2048 pixels CCD (charge-coupled device) giving a higher resolution (0.1 nm) and a longer lamp life time (3 years). It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 919 is a fully extractive hot-wet gas analyzer, providing a complete monitoring system with sample extraction and transport, designed to maintain sample integrity. Developed to meet the requirements of the most challenging process and emissions monitoring applications in a cost-effective way, it delivers high reliability and ...
-
Manufactured by RMA Fiventures Asia-Pacific Pte Ltd.based in SINGAPORE
Design and Features:Available for Wet, Hot or Dry Fuel Gas. System Compliance to Local / International Environmental Regulations including US EPA 40 CFR Part 75 and 40 CFR Part 60. ...
-
Manufactured by Unisearch Associates Inc.based in CANADA
LasIR Laser-based In-situ Gas Monitor For US-EPA (PS-18) & TÜV Compliance (EU-EN 14181), Process Monitoring. Unisearch LasIR Gas Analyzer is a continuous monitor designed to measure flue gases for both compliance and process monitoring. The Controller uses a near infrared (NIR) Tunable Diode Laser Absorption Spectrometer System ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you