filter air equipment in Kansas

  • Model 5300P - Air Filter Regulator

    The Model 5300P is a 316L SST self-contained pressure reducing air regulator designed for gaseous service including sour gas and other corrosive gases. The unit is capable of controlling outlet pressure between 0-150 psig (.0-10.0 Barg) with a maximum inlet pressure of 290 psig (20 Barg).

    By Cashco Inc based in Ellsworth, KANSAS (USA). from Air Filter Regulator Product line

  • Moldows - Model FT - Filter Cartridges

    Moldow's FT filter is a cartridge filter that efficiently filtrates small amounts of fine dust. It is especially suitable for the metal industry where there is a need for a filter system in continuous operation for extraction of air from processes such as welding and grinding steel.  The filter has a capacity from 5,000 to 24,000 m3/h (3,000 ...

    By Moldow A/S Office in Overland Park, KANSAS (USA). from Filter Cartridges Product line

  • Filter / Receivers

    CAMCORP has a large selection of filter/receivers. We can design your Filter/ Receiver for top bag access, side bag access or walk-in clean air plenum access. Filter/Receivers can be designed using conventional bags with cages or spun bonded polyester filter elements. Filter/Receivers can be designed for low or high pressure or vacuum conditions ...

    By CAMCORP, Inc. based in Lenexa, KANSAS (USA). from Filter / Receivers Product line

  • Model BHA - Filter Bags

    You will find we offer a complete range of fabric filter bags for your dust collection system in a wide variety of fabrics, finishes, styles and sizes. Because of the variety of particulates collected and individual operational conditions of collection systems, selection of replacement filters should be determined through careful analysis of your ...

    By CLARCOR Industrial Air Office in Overland Park, KANSAS (USA). from Filter Bags Product line

  • SeptiTech - Model STAAR™ - Filter Systems

    Utilizing an enhanced, biological, unsaturated media filter process, the SeptiTech STAAR Systems are ETV-EPA verified and NSF/ANSI Standard 40/245 certified. With a UV disinfection system and a low-impact technology for irrigating plants (or other non-potable use), the patented SeptiTech STAAR filter systems are designed for direct discharge or ...

    By BIOMICROBICS, Inc. based in Shawnee, KANSAS (USA).

  • Reverse Air Baghouse

    CAMCORP's reverse air filters require “No” plant compressed Air. We offer two styles that we can customize to your application. The SWF (Sweep Arm Filter) utilizes a Pressure Blower to generate the bag cleaning reverse air. The HVP (High Velocity Pulse) utilizes a Positive Displacement (PD) pump to generate the bag cleaning pulse air.

    By CAMCORP, Inc. based in Lenexa, KANSAS (USA). from Reverse Air Baghouse Product line

  • Premium

    Duplex Gravity Filter (DGF)

    The Smith & Loveless Duplex Gravity Filter (DGF) removes suspended solids and particles, improving effluent quality. The standard system is available in sizes to fit any application, providing up to 200 square feet (18.6 square meters) of effective filtration area per unit. Dual media filtration increases filtration depth and limits the head ...

    By Smith & Loveless Inc. based in Lenexa, KANSAS (USA). from Duplex Gravity Filter (DGF) Product line

  • Air Power Units

    Kice air power units are suited for a wide range of applications such as positive and negative pressure conveying systems, fluidization systems, vacuum sweeper systems, filter systems and many other unique applications. Our engineers have four generations of experience in properly applying air power units.

    By Kice Industries based in Wichita, KANSAS (USA).

  • Moldow - Model SB - Positive Pressure Filter System

    The SB filter is a positive pressure filter designed for continuous operation and filtration of different air volumes and medium dust loadings.

    By Moldow A/S Office in Overland Park, KANSAS (USA). from Positive Pressure Filter System Product line

  • Moldow - Welding Smoke for Air Extraction

    Moldow provides custumised solutions for air extraction in production areas, extraction of welding smoke, dust from grinding, plasma/fiber cutting, etc. The systems are constructed with self-cleaning filter systems to meet environmental requirements and can be supplied with heat recovery.

    By Moldow A/S Office in Overland Park, KANSAS (USA). from Welding Smoke for Air Extraction Product line

  • Model TM1000 - Portable Air Cleaners

    Micro Air manufactures a complete line of portable collectors. from the TM1000 cartridge collector, for lighter duty or smaller volume applications to the MC1500 cartridge collector for heavy duty production.

    By Micro Air based in Wichita, KANSAS (USA). from Portable Air Cleaners Product line

  • Model MT1251/MT1252 - Ambient Air Cleaning Systems

    MT1251 in ambient air for odor control in printing application. Ambient capture is a good way to capture pollutants and keep plant air below OSHA and NIOSH standards. In basic terms, we filter your plant air in problem areas to achieve desired air changes per hour based on application and pollutant levels. This can be a very cost effective way to ...

    By Micro Air based in Wichita, KANSAS (USA). from Ambient Air Cleaning Systems Product line

  • Labconco - Purifier Filtered PCR Enclosures

    Purifier Filtered PCR Enclosures are specialized vertical laminar flow clean benches that provide a controlled environment in which to perform polymerase chain reaction experiments.

    By Labconco Office in Fort Scott, KANSAS (USA). from Purifier Filtered PCR Enclosures Product line

  • DynaSand EcoWash - Continuous or Intermittent Backwash Filter with Continuous Upflow and Single Granular Media

    The Parkson DynaSand® EcoWash® Filter is a unique system that filters liquid suspensions to the designed effluent quality, while at the same time cleaning the sand bed so the filter is not shut down during the backwash time. Feed water is passed upwards through the sand bed and exits the top of the filter as clean water. At the same time, sand can ...

  • Moldow - Model MHL - Dust Extraction System

    Moldow's MHL filter is a modular designed filter system designed for continuous operation, large air volumes and heavy dust loading from e.g. production in the furniture, MDF, and chipboard industry. The filter is available for both positive and negative pressure systems, and has automatic and continuous cleaning of the filter bags, ...

    By Moldow A/S Office in Overland Park, KANSAS (USA). from Dust Extraction System Product line

  • Dia - Model SCA - Source Capture Exhauster Arms

    Micro Air model SCA exhauster arms are used on a wide variety of fume and particulate exhaust applications. Designed to control airborne pollutants at their generation point, SCA arms can be equipped with a fan to vent outside, or ducted to Micro Air® air cleaners or dust collectors to filter the material and then return fresh air back into ...

    By Micro Air based in Wichita, KANSAS (USA). from Source Capture Exhauster Arms Product line

  • Model SC 150 - Source Capture Collectors

    Micro Air SC150 is an exceptional unit for soldering or other operations where source capture is required. Solder, smoke or other polluted air is captured at the source and flows through the arm or arms, and through the foam prefilter. This prefilter effectively removes the larger particles. Next the smaller particle of polluted air are captured ...

    By Micro Air based in Wichita, KANSAS (USA). from Source Capture Collectors Product line

  • Labconco - Purifier Horizontal Clean Benches

    These clean benches direct HEPA-filtered laminar air horizontally over the work area to provide ISO Class 5 conditions and protect your work from particulate contamination.

    By Labconco Office in Fort Scott, KANSAS (USA). from Purifier Horizontal Clean Benches Product line

  • Labconco - Model DH2 - Paramount Ductless Enclosures

    These DH2 ductless hoods use stackable carbon filters to remove certain gases, solvents or radioisotopes. HEPA filters can be added to trap particulates.

    By Labconco Office in Fort Scott, KANSAS (USA). from Paramount Ductless Enclosures Product line

  • MCF PowerSaver - Dust Collector

    The MCF PowerSaver is a sustainable, low maintenance air filtration solution which operates with low pressure cleaning air (7-9 psig). It consumes less horsepower than any other bag filter and requires no integrated plant compressed air. Providing unrivaled cleaning capacities (up to 250,000 CFM), the MCF PowerSaver can handle challenging ...

    By Mac Process - Schenck Process group Office in Sabetha, KANSAS (USA). from Dust Collector Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you