filter media manufacturer equipment in Texas

  • Premium

    Bio-Rings - Plastic Media for Trickling Filters

    Materials: Plastic Jaeger Bio-Rings are manufactured in weighted or un-weighted polypropylene to give a specific gravity greater than 1.0 or less than 1.0, depending on the application.

    By Raschig USA Inc. based in Arlington, TEXAS (USA). from Plastic Media for Trickling Filters Product line

  • Premium

    Sessil - Vertical Plastic Strip Media for Trickling Filters

    Ideal for pretreating high strength industrial wastewater and typical municipal water. Continuous vertical design with no packing interfaces to accumulate solids. Manufactured of UV stabilized, high density polyethylene for long life.

    By Raschig USA Inc. based in Arlington, TEXAS (USA). from Vertical Plastic Strip Media for Trickling Filters Product line

  • Premium

    Bio-Pac - Model SF30 - Media for Trickling Filters, Submerged Beds and Anaerobic Reactors

    Preferred media for replacing rock media in existing trickling filters. Manufactured of reprocessed UV stabilized polypropylene for long life. Used extensively in anaerobic and aerobic submerged attached growth reactors. Low installation costs.

  • Premium

    N-Dec - Random Media Underdrain And Support System For Trickling Media

    N-Dec modular panels eliminate blockage of the trickling filter floor. Manufactured of HDPE, N-Dec panels are resistant to ultraviolet degradation. N-Dec underdrains are strong and lightweight, yet flexible enough to allow self-contouring to variations in the trickling filter floor.

    By Raschig USA Inc. based in Arlington, TEXAS (USA).

  • Polypropylene Media Filter Cartridge

    Olefin, a manufatured fiber in which the fiber-forming substance is any long-chain synthetic polymer composed of at least 85% by weight of ethylene, propylene or other olefin units. has become the most popular media on market due to its wide range of chemical compatibility. JFPI manufactures (4) types of polypropylene media's; FDA (P) (has coconut ...

    By Johnson Filtration Products, Inc. based in Amarillo, TEXAS (USA).

  • Rayon Media Filter Cartridge

    A manufactured fiber composed of regenerated cellulose, as well as manufactured fibers composed of regenerated cellulose in which substituents have replaced not more than 15% of the hydrogen's of the Hydroxyl group. Manufactured to compete with cotton media's, originally suppose to be a less costly fiber, but is now more expensive. JFPI ...

    By Johnson Filtration Products, Inc. based in Amarillo, TEXAS (USA).

  • Acrylic Media Filter Cartridges

    Properties: Acrylic: (O) - A Manufactured fiber in which the fiber-forming substance in any long-chain synthetic polymer composed of at least 85% by weight of acrylonitrile units. Modacrylic (M) - Unless rubber or anidex, the fiber-forming substance is long-chain synthetic polymer containing 35-85% acrylonitrile units.

    By Johnson Filtration Products, Inc. based in Amarillo, TEXAS (USA).

  • Cotton Media Filter Cartridges

    A unicellular, natural fiber composed of almost pure cellulose. As taken from plants, the fiber is found in lengths of 3/8' to 2'. The fiber is then bleached to meet FDA requirements. JFPI manufactures. (3) types of cotton media; bleached (C), white (EC) (industrial) and natural (U). Bleaching is done using sodium hypocholorite as the bleaching ...

    By Johnson Filtration Products, Inc. based in Amarillo, TEXAS (USA).

  • Nylon (N) Media Filter Cartridge

    A manufactured fiber in which the fiber-forming substance is a long-chain synthetic polyamide in which less than 85 percent of the amide linkages are attached directly to two aromatic rings.

    By Johnson Filtration Products, Inc. based in Amarillo, TEXAS (USA).

  • Polyester (Y) Media Filter Cartridge

    A manufactured fiber in which the fiber-forming substance is any long-chain synthetic polymer composed of at least 85% by weight of an ester of a substituted aromatic carboxylic acid, including but not restricted to substituted terephtalate units, and parasubstituted hydropxybenzoate units.

    By Johnson Filtration Products, Inc. based in Amarillo, TEXAS (USA).

  • Canadian Clear - Iron Removal Filter

    Bore well water passes through the IRF filter from the Raw Water Storage Tank. The IRF Filter removes Iron. Structural Design: Manufactured with FRP/SS outer casing to provide structure, strength and longevity of 20-30 years. Internally lined with acid resistance fiber re-enforced plastic (FRP) / Epoxy. All valves used in the system of ...

    By Canadian Clear based in San Antonio, TEXAS (USA). from Iron Removal Filter Product line

  • Model DS-G4-300 and -600 - Drop Safe Filters

    Filtrair Drop Safe (DS) rigid filters serve as very efficient pre-filters in air intake systems of combustion engines, in any environmental condition (including offshore, marine) and in any climate (including tropical). They efficiently remove airborne particulate matter butalso snow, mist and fog, acting as a filter and a coalescer in one. DS ...

    By Filtration Group Corporation based in Austin, TEXAS (USA). from Drop Safe Filters Product line

  • Model DS-F5 and DS-F6-600 - Drop Safe Filter

    Filtrair Drop Safe (DS) rigid filters serve as very efficient pre or final filters in air intake systems of combustion engines, in any environmental condition (including offshore, marine) and in any climate (including tropical). They efficiently remove airborne particulate matter but also snow, mist and fog, acting as a filter and a coalescer in ...

    By Filtration Group Corporation based in Austin, TEXAS (USA). from Drop Safe Filter Product line

  • GasPleat - Model SE Series (JSE) - Sewn-End Filter Elements

    GasPleat SE Series sewn-end radial fin gas filter elements are designed to replace any manufacture's elements of this design in particulate removal from a gas stream. A wide selection of media is available including: cotton, rayon, polyester, polypropylene, nylon, Teflon, Nomex, and fiberglass to suit any application.

    By Jonell Inc. based in Breckenridge, TEXAS (USA). from Sewn-End Filter Elements Product line

  • GasPleat - Model ME Series (JME) - Molded-End Filter Elements

    Jonell molded-end pleated filter elements are designed to replace any manufacturer's elements of this design in gas service. The GasPleat ME Series filters are molded from high quality plastisol that seals the ends of the elements while acting as a gasket against the sealing plates in the filter housing. A wide selection of media is available ...

    By Jonell Inc. based in Breckenridge, TEXAS (USA). from Molded-End Filter Elements Product line

  • Rosedale - General Service Membrane Filter Cartridges

    GS Series Polyethersulfone Membrane Cartridges are designed for general industrial service where the need for cost effective filtration is a must. These cartridges utilize a pleated membrane design, incorporating the maximum amount of media that can be used in a cartridge. These units, manufactured for general industrial use, are manufactured to ...

    By Rosedale Products, Inc. Office in Houston, TEXAS (USA). from General Service Membrane Filter Cartridges Product line

  • Model PFL (F5) - Synthetic Fiber Based Pocket Filter

    A synthetic fiber-based pocket filter developed and manufactured at Filtrair's own high-tech media plant. The filter medium is constructed from selected high performance fibers in a progressive density multi-layering technique to ensure high depth loading with optimal lowest pressure drop performance. This results in long filter life and usage, ...

    By Filtration Group Corporation based in Austin, TEXAS (USA). from Synthetic Fiber Based Pocket Filter Product line

  • JonAIR - Model JAF Series - Rectangular Style Panel Air Filter Elements

    Jonell's extended range of high efficiency pleated panel filters are manufactured with various media options in heavy duty metal frames. All of them are produced according to the highest quality standards and optimized for the highest performance and lowest energy consumption. These pleated media elements are designed to provide the optimum ...

    By Jonell Inc. based in Breckenridge, TEXAS (USA). from Rectangular Style Panel Air Filter Elements Product line

  • Premium

    Dura-Dek - Interlocking Panels

    Grating for top level media protection. Dura-Dek interlocking panels manufactured of recycled high density polyethylene provide a protective layer from foot traffic, hydraulic impact, and UV degradation when placed on top of our Dura-Pac biological trickling filter media or Dura-Set tube settlers. Dura-Dek can be used on new or existing trickling ...

    By Raschig USA Inc. based in Arlington, TEXAS (USA).

  • Support Grid Screens

    Frequently used in down-flow vessels, support grids are flat screens that are used to support filter media. At Delta Screens, we can manufacture support grids in the material, size, shape and to the exact specification your situation requires. We can also create support grids as a single form, or as multiple segments for installation through your ...

    By Delta Screens based in Houston, TEXAS (USA). from Support Grid Screens Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you