Filter Test Equipment
-
Manufactured by Oenolab Diagnosticsbased in FRANCE
FILTER TEST UNIT ECO + COMPRESSOR. Equipment for determination of wine filterability with compressor. The filterability index is obtained by measuring the difference of time needed to filtrate 200 ml and 400 ml of wine at 2 bars through a membrane Ø 25 mm with a porosity of 0.65 µm. Wine should be at room ...
-
Manufactured by Palas GmbHbased in GERMANY
For penetration measurements, the instrument works with different dust, salt, oil as well as latex aerosols over a size range from 0.02 to 40 ...
-
Manufactured by Palas GmbHbased in GERMANY
Palas® enables the test of respiratory masks, better than the standard. Measurement of fractional efficiency in virus size range between 120 nm and 160 nm, total measurement range up to 40 ...
-
Manufactured by Oenolab Diagnosticsbased in FRANCE
Equipment for determination of wine filterability. The filterability index is obtained by measuring the difference of time needed to filtrate 200 ml and 400 ml of wine at 2 bars through a membrane Ø 25 mm with a porosity of 0.65 µm. Wine should be at room temperature before ...
-
Manufactured by Elysia s.a.based in BELGIUM
SAFIRA is our automated sterile filter integrity test. The SAFIRA-System is used to verify the integrity of sterile filters. It provides a Hands-free inline sterile filter test in distribution lines. We have developed a method, which makes it possible to test the filter integrity ...
-
Manufactured by Sciential Solutions LLCbased in USA
In a rotary vacuum drum filter, a porous media or filter cloth is supported by the cylindrical drum surface and passes through the sludge vat while the partially submerged drum rotates under applied vacuum (negative pressure). The slurry is sucked from the vat with the liquid passing through the media and the solids retained on the ...
-
Manufactured by PAMAS - Partikelmess- und Analysesysteme GmbHbased in GERMANY
The PAMAS 4132 is used as a particle counting system for Single & Multipass Filter test rigs. The standard system fits in the test rigs of filter manufacturers. In case of a Single Pass Filter Test, the liquid passes the filter only once and then is deviated to the outflow. ...
-
Manufactured by Sciential Solutions LLCbased in USA
Pretreated (chemically conditioned) feed sludge is introduced to the gravity drain deck where furrowing plows move the sludge to allow free water to drain. As the sludge travels along the belt filter, the sludge is fed into a low pressure wedge zone where the sludge is trapped between the upper and lower belts. As the belts converge on the ...
-
Manufactured by Sterlitech Corporationbased in USA
These BioBurden test kits from Sterlitech make for easy one-handed operation of filtering water-based samples for microbial analysis, environmental contamination, or small batch QC testing. Each kit includes a durable Rocker vacuum pump, re-usable and autoclavable 47mm polysulfone filter funnel(s), and trap bottle for collecting ...
-
Manufactured by Antares AZV s.r.obased in CZECH REPUBLIC
Laboratory and pilot plant tests: Filtration and sedimentation testing on laboratory test equipment can provide the appropriate type of chemical treatment and this can accelerate the sedimentation of a more efficient drainage of the suspension. Another option is to undertake a pilot plant tests on the test ...
-
Manufactured by Cytivabased in USA
GE’s Whatman TCLP test filters are acid-treated with low metal content. They support TCLP testing by providing accurate information about TCLP limits to ensure the best possible disposal plan can be put into ...
-
Manufactured by Palas GmbHbased in GERMANY
Modular filter media testing system for quick determination of fraction separation efficiency, burden and pressure loss in accordance with the standards and based on customer ...
-
Manufactured by Palas GmbHbased in GERMANY
Fast and economical quality control and development of flat media with dust, oil or salt starting at 120 nm. Versions MFP 1000 HEPA for EN 1822-3 and ISO ...
-
Manufactured by Flow Test GmbHbased in GERMANY
The Filter Integrity Test Trolley "ita-02" is a compact, mobile filter integrity test trolley designed for all standard filter integrity tests on both hydrophilic and hydrophobic membrane filters. In addition to integrity testing this instrument can be used ...
-
Manufactured by Flow Test GmbHbased in GERMANY
The Filter Integrity Test Trolley "ita-01" is a compact mobile filter integrity test instrument designed for all standard filter integrity tests on both hydrophilic and hydrophobic membrane filters. In addition to filter integrity tests this ...
-
Manufactured by Palas GmbHbased in GERMANY
Modular filter media test systems for the testing of depth filter media, coalescing filter media and cleanable surface filter ...
-
Manufactured by BHS-Sonthofen Inc.based in USA
Active Filter Area: 0.17 m². Dimensions (LxWxH): 6ft x 4.5ft x 6.5 ft.Maximum Operating Pressure: 6 barg (87psi). Material of Construction: Stainless ...
-
Manufactured by Ingorbased in SPAIN
INGOR can offer pilot and test filter press. They are small size equipments specially designed for the study of new applications and for the production of very small amounts of product. Their special design allow to operate easily and to change the location without ...
-
Manufactured by Cytivabased in USA
The GF/C RTU line pre-treats our traditional GF/C filter with washing, drying, cooling (in a desiccator), and weighing steps aligned to the requirements of EN 872 – the European norm for suspended solids in water testing. The Cytiva quality organization certifies that these filters have weight loss of less than 0.017 mg/cm2 after ...
-
Manufactured by Cytivabased in USA
, cooling and weighing steps repeated twice for customers with the highest regulatory concern - Economy versions of 934-AH RTU dissolved, suspended, and volatiles testing filters also available. These filters are pre-washed and dried but not weighed and do not come with barcodes ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you