Fire Detection Equipment Near Jamaica
-
Manufactured by Autronica Fire and Security ASbased in NORWAY
The operator panel controls and handles all operations, alarm management, indications and other functions within an operation zone. No loop driver, input or output modules can be connected to this panel. The panel communicates with controllers and the entire system via the Ethernet-based local area network; ...
-
Manufactured by Autronica Fire and Security ASbased in NORWAY
/ CSA / INMETRO must be spceified upon ordering. Extreme sensor dynamics provide reliable detection that has greatly reduced detection time and nuisance alarms, and expanded the use to cover even more application areas. The type of operation is configurable to Heat, Optical or Multisensor, covering several applications. It has a wide range of ...
-
Manufactured by Autronica Fire and Security ASbased in NORWAY
BS-420 is a complete fire alarm control panel with full operation capabilities. The panel serves as an operating panel for one or several defined operation zones. All alarm handling and system features can be controlled and monitored from the panel. The panel can accommodate up to a maximum of 12 modules. The system offers loop driver ...
-
Manufactured by Autronica Fire and Security ASbased in NORWAY
Full fire detection system with 2 loop drivers each controlling 127 devices. The operator panel may be mounted remotely with redundant connections both for signal and power. The panel serves as a stand-alone panel. A maximum of 8 additional panels can be freely mixed and connected to the fire alarm control panel via the RS-485 panel bus, ...
-
Manufactured by Autronica Fire and Security ASbased in NORWAY
A maritime gas alarm control panel with full operation capabilities. All gas alarm handling and system features can be controlled and monitored from the panel. Note that the panel cannot be used for detection of fires. The panel communicates with other system units on the Ethernet-based local area network, AutroNet. The maximum number of ...
-
Manufactured by Autronica Fire and Security ASbased in NORWAY
Basic smoke/heat detector, no alarm device. AutroGuard® V-430 multicriteria protector provides a new generation technology that simplifies installation and commissioning, and increases fire safety. Extreme sensor dynamics provide reliable detection that has greatly reduced detection time and nuisance alarms, and expanded the use to cover ...
-
Manufactured by Autronica Fire and Security ASbased in NORWAY
BG-201 is an interactive point flame detector for detection of fires involving combustion of carbonaceous materials. The detector has a high IP rating making it suitable for the harshest environments. Advanced digital signal processing algorithms ensure fast detection of real fire scenarios combined with high immunity against ...
-
Manufactured by Autronica Fire and Security ASbased in NORWAY
Unit for monitoring and control of extinguishing equipment. IP67. For AutroSafe/AutroSafe IFG only. Note that the extinguishing control application requires feedback within 10 seconds after the release of the extinguishing media to avoid a faulty release message. The unit has two monitored inputs: Input A: extinguishing media. Input B: trigger gas. If the system does not have trigger gas, input B ...
-
Manufactured by Autronica Fire and Security ASbased in NORWAY
Standard manual call point with SelfVerify function and LED indication. Approved according to EN 54-11 and EN 54-17 for indoor applications. The call point must be installed according to local regulations, which normally means along escape routes, landings and exits. The SelfVerify function ensures the highest grade of reliability and the lowest degree of manual testing because all units ...
-
Manufactured by Autronica Fire and Security ASbased in NORWAY
AutroFlame X98AF single IR flame detector in stainless steel housing. Relay and 4 - 20 mA, Certified Ex d e IIC T5-T6. Ingress protection level: IP66. Swivel mount not included. Approved to FM 3260 (2000), the X98AF meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
An advanced carbon monoxide detector designed to provide early warning of spontaneous combustion in coal and biomass storage ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A simple fibre-optic, two-wire, loop powered thermometer with 4 to 20mA output. Specifically designed to improve process control in the glass industry. The Glass Forehearth (FG) is a application dedicated fibre-optic, two-wire, loop powered thermometer with 4 to 20mA output. Offering accurate, high resolution and reliable temperature measurements up to 1650°C (3000°F), the FG thermometer ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Multi-Spectrum TriBand™ Fire & Flame Detector - Dual IR + Visible Bands The FS18X is an advanced technology TriBand™ (IR/IR/Visible) Electro-Optical Flame Detector. High-speed solid-state Quantum sensors deliver fast reliable fire detection for all types of fires with the highest false event immunity. Patented ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
QuadBand™ Triple IR Fire & Flame Detector - Triple IR + Visible ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CCFC Field Camera is a high-quality, high-resolution outdoor zoom video and still image camera specifically designed for remote outdoor observation applications. The camera captures high-quality photos and video in wide-angle, and with 18x optical zoom, under various lighting conditions. Our Field Camera consumes low power, making it ideal for outdoor observation in remote locations using a ...
-
based in USA
S3 contains all of the information needed for easy and accuate configuration of any Det-Tronics or third party device that is compatible with an Eagle Quantum network. It's graphic-based operating environment greatly simplifies the creation of gas and fire detection and fire suppression and annunciation logic. To provide full and ...
-
based in USA
The X3302 brings state-of-the-art flame detection to the difficult task of detecting invisible hydrogen flames. With a solid cone of vision for Hydrogen fire detection, coupled with superior false alarm rejection, the X3302 provides protection in applications such as refineries, chemical loading, battery rooms, compressor areas, ...
-
based in USA
The Det-Tronics Eagle Quantum Premier (EQP) Fire and Gas Detection/Releasing System serves the monitoring and protection functions in hazardous areas. This microprocessor based module performs communication and control functions of the fire and gas safety ...
-
based in USA
The Det-Tronics EQP is a configurable, distributed, intelligent safety system providing flame and/or gas detection, along with alarm signaling, notification, extinguishing agent release, and/or deluge operation. All system components are integrated on a fault-tolerant digital communication network. The system is ideally suited for harsh ...
-
based in USA
The 8 Channel DCIO Module is specially designed to expand the Input and Output capability of the Det-Tronics Eagle Quantum Premier System. The unit is designed to provide continuous and automated fire/gas protection, while ensuring system operation through continuous supervision of System Inputs/Outputs and Local Operating Network/Signalling ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you