fire protection system equipment in Texas

  • TIGERFLOW - Fire Protection Systems

    TIGERFLOW’s fire pump systems are built, tested and ETL/C-ETL third party certified before shipment. SERIES FPS-7000 are cost-effective engineered fire protection systems for commercial, institutional, municipal, and industrial applications. Our systems provide numerous advantages to owners locally, and worldwide. The pump system arrives on ...

    By TIGERFLOW Systems, Inc. based in Dallas, TEXAS (USA). from Fire Protection Systems Product line

  • Model 4206 - Fire Protection Systems

    In regions where water is either scarce or not connected to a municipal supply, rainwater harvesting can provide the critical water needed for fire protection. In most cases, the requirements of fire suppression sprinkler system design are dictated by various Building Codes.  Chiefly in the United States, the National Fire Protection ...

    By Climate, Inc. Office in Rogers, TEXAS (USA).

  • Watertight Flowtite - Fire Protection Tanks

    Watertight Flowtite tanks, from Containment Solutions, can be custom built for any fire protection design. We understand the requirements of fire protection systems, and manufacture our tanks to National Fire Protection Association (NFPA) standards.

    By Containment Solutions, Inc., (CSI) based in Conroe, TEXAS (USA). from Fire Protection Tanks Product line

  • Crew Single Shot Combat System

    The Spectrex system is an automatic fire/fuel explosion detection and suppression system, specifically designed for Combat Vehicles, providing increased survivability against fires initiated by IED's and penetrating munitions.  In the troop compartment - the system protects personnel by reducing pressure build-up resulting from fuel ...

    By Spectrex Inc Office in Houston, TEXAS (USA). from Crew Single Shot Combat System Product line

  • Crew Double Shot Combat System

    The Spectrex system is an automatic fire/fuel explosion detection and suppression system, specifically designed for Combat Vehicles, providing increased survivability against fires initiated by IED's and penetrating munitions. In the troop compartment - the system protects personnel by reducing pressure build-up resulting from fuel explosions, ...

    By Spectrex Inc Office in Houston, TEXAS (USA). from Crew Double Shot Combat System Product line

  • Insulated Tanks

    USA Tank is a leading tank manufacturer of vertical and horizontal sidewall tank insulation systems for heated and cold storage applications. We have over 35 years of experience in the storage tank industry; we employ this knowledge to provide innovative solutions for your tank insulation needs. We manufacture each insulation panel specifically to ...

    By USA Tank Storage Systems Office in Sugar Land, TEXAS (USA).

  • NFPA

    Our NFPA labels reinforce the Nation Fire Protection Agency system for identifying the health, flammability, reactivity and specific hazards of a chemical or material.

    By The Compliance Center (ICC) Office in Houston, TEXAS (USA). from NFPA Product line

  • Premium

    Rotork - Model FB Range - Worm Gears Operators

    Quarter-turn cast iron gearbox suitable for use with fire protection (i.e. sprinkler) systems, includes limit switches to be incorporated into a supervisory electrical circuit. Designed and tested specifically to meet UL1091 specification and FM1112 approval.

    By Rotork plc Office in Houston, TEXAS (USA). from Worm Gears Operators Product line

  • Premium

    Shand & Jurs - Model 94307 - Horizontal Flame Arrester

    The Shand & Jurs 94307 Horizontal Flame Arrester is designed to orovide a positive flame stop in gas piping systems. The 94307 not only provides exceptional protection against propagation of fire, but also offers maximum flow capacity. It is specifically designed to prevent liquid accumulation in the tube bank assembly.

    By Shand & Jurs (L&J Technologies & L&J Engineering) Office in Houston, TEXAS (USA). from Horizontal Flame Arrester Product line

  • Model 7628 - Flame Arrester

    The Groth 7628 Flame Arrester is designed to inhibit flame and deflagration propagation in gas piping systems and to protect low pressure tanks containing flammable liquids. Arresters protect low flash point liquids from externally caused sources of heat and ignition. This provides increased fire protection and safety.

    By Groth Corporation based in Stafford, TEXAS (USA). from Flame Arrester Product line

  • Model 7618 - Flame Arrester, Vertical Installation

    The Groth 7618 Flame Arrester is designed to inhibit flame and deflagration propagation in gas piping systems and to protect low pressure tanks containing flammable liquids. Arresters protect low flash point liquids from externally caused sources of heat and ignition. This provides increased fire protection and safety.

    By Groth Corporation based in Stafford, TEXAS (USA). from Flame Arrester, Vertical Installation Product line

  • Model 7658A - Flame/Detonation Arrester

    The Groth 7658 Detonation Flame Arrester is designed to inhibit flame and detonation propagation in gas piping systems and to protect low pressure tanks containing flammable liquids. Arresters protect low flash point liquids from externally caused sources of heat and ignition. This provides increased fire protection and safety. Designed for NEC ...

    By Groth Corporation based in Stafford, TEXAS (USA). from Flame/Detonation Arrester Product line

  • Model 1000DCV - Cast Iron Detector Check Valves

    Series 1000DCV Detector Check Valves are used in fire protection applications to detect leakage or unauthorized use of water in fire or automatic sprinkler systems. It consists of a cast iron body construction with choice of flanged or threaded connections. Series 1000DCV can be installed in horizontal or vertical position. Maximum Pressure: ...

    By Ames Fire & Waterworks Office in Houston, TEXAS (USA). from Cast Iron Detector Check Valves Product line

  • Model 1000SS - Stainless Steel Detector Check Valves

    Series 1000SS Detector Check Valves are used in fire protection applications to detect leakage or unauthorized use of water in fire sprinkler systems. It consists of a stainless steel body construction with flanged connections, and stainless steel linkage parts. Series 1000SS is lightweight, non-corrosive, and can be installed in horizontal or ...

    By Ames Fire & Waterworks Office in Houston, TEXAS (USA). from Stainless Steel Detector Check Valves Product line

  • Model 1000DCV - Steel Detector Check Valves

    Series 1000DCV Detector Check Valves are used in fire protection applications to detect leakage or unauthorized use of water in fire sprinkler systems. This Series features a fabricated steel body construction and stainless steel linkage. Model 1000DCV comes with 125# flanged ends, Model 1005DCV comes with 125# flanged x grooved ends and Model ...

    By Ames Fire & Waterworks Office in Houston, TEXAS (USA). from Steel Detector Check Valves Product line

  • Enduro - Model Tuff Span - Fiberglass Form Deck

    For facilities with chemical processes, Tuff Span™ fiberglass FRP/GRP Form Deck from Enduro can provide corrosion protection and a permanent form for the underside of slabs. With a high content of glass fiber reinforcements, Tuff Span Form Deck has the strength and stiffness needed for reliable support of heavy, wet concrete. The ...

    By Enduro Composites / Enduro Systems Inc. based in Houston, TEXAS (USA). from Fiberglass Form Deck Product line

  • Model 50B-5KG - Fire Protection Pump Suction Control Valve

    The Model 50B-5KG Pump Suction Control Valve is designed specifically for Fire Pump Suction Control Service.  It modulates to maintain the pump discharge in relation to the suction head available, thus assuring that the suction head pressure does not fall below the pre-set minimum.  When there is a demand in the Fire System, the pump is ...

    By Cla-Val Distributor in TEXAS (USA). from Fire Protection Pump Suction Control Valve Product line

  • Model 55L - Pressure Relief Valve - UL, FM

    The Cla-Val Model 55L (UL Listed FM approved) Pressure Relief Valve is a direct-acting, spring loaded, diaphragm type relief valve. The valve may be installed in any position and will open and close within very close pressure limits. Using the Model 55L in a fire protection system or other closed type system, prevents pressure build-up ...

    By Cla-Val Distributor in TEXAS (USA). from Pressure Relief Valve - UL, FM Product line

  • System 57 Controller

    A high precision, intelligent controller that accepts inputs from flammable and toxic gas detectors as well as flame, smoke and heat detectors and manual call points. For almost half a century, our gas detection systems have provided the safety needed to protect plant and personnel from flammable and toxic gas hazards. Across the globe, they are ...

    By Honeywell Analytics, Inc. Distributor in TEXAS (USA). from System 57 Controller Product line

  • Model 50B-4KG1KOL/2050B-4KG1KOL - Pressure Relief Valve with Anti-Cavitation Trim- UL, FM

    The Cla-Val Globe Pattern Model 50B-4KG1KOL and Angle Pattern Model 2050B-4KG1KOL relief valve is designed to relieve excess pressure in a fire protection system, while eliminating the damaging effects of cavitation.

    By Cla-Val Distributor in TEXAS (USA). from Pressure Relief Valve with Anti-Cavitation Trim- UL, FM Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you