Fire Protection System Equipment Near Colorado
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-8700 pressure relief valve, which is UL / FM labelled and listed, automatically relieves excess pressure in the fire protection system to discharge. The RPS series valves will also automatically modulate to relieve excess pump capacity during pump start up and shut down, allowing the pump to operate without causing surges. These ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The InnovaSwitch insertion-type flow switch is a high-performance, industrial-grade mass flow switch for liquids and gases. This product was designed for heavy industrial environments, including high temperature and high pressure. Each InnovaSwitch includes temperature compensation over its entire measurement range to ensure set point stability and accuracy for process temperatures that vary up ...
-
Manufactured by Peripheral Manufacturing, Incbased in USA
product innovations is the Aero-K®, an eco-friendly, potassium-based fire protection suppression system for automotive, industrial, and computer industry applications. You can contact Ron at ronc@periphman.com. If you are responsible for protecting your server room from a fire risk, you will need to identify ...
-
Manufactured by Watts Regulator Companybased in USA
Series 1116FM (Angle) Relief Valve meets all requirements for UL listed, FM Approved fire protection service. The design and features incorporated in the WATTS ACV valves assure accurate control, dependable performance, and long life. Automatically maintains a constant pressure in the fire protection system by ...
-
Manufactured by Watts Regulator Companybased in USA
Series (Globe) Relief Valve meets all requirements for UL listed, FM Approved fire protection service. The design and features incorporated in the WATTS ACV Valves assure accurate control, dependable performance, and long life. Automatically maintains a constant pressure in the fire protection system by relieving ...
-
Manufactured by Watts Regulator Companybased in USA
Series 007DCDA Double Check Detector Assemblies prevent the backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. They incorporate a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. The compact epoxy coated cast iron ...
-
Manufactured by Nortek Air Solutions, LLC.based in USA
The Clean-Trak modular flush-surface ceiling system is available in several versions, including modular top and bottom-load systems, gasketed and gel flush ceilings, with integrated lighting and fire ...
-
Manufactured by Firetrace International LLCbased in USA
stations, and around large industrial machines, CO2 fire suppression systems may be the most effective fire protection ...
-
Distributed by BASCO, Incbased in USA
ventilation and explosion-proof conduit for alarms. Package B adds fire protection systems for outdoor/indoor flammable liquid storage. Package C adds R-11 insulation, heating, air conditioning and forced-air ventilation where chemical stability, freeze protection or personnel comfort are desired. Package D provides an ...
-
by BCCKbased in USA
Liquefied Natural Gas (LNG) is a major component in the world’s clean energy future. Therefore, effective LNG processing plants must be engineered, designed and constructed to support this sector in the years ahead. As natural gas is liquified, it becomes easier to transport and store, as well as offering noteworthy environmental benefits. BCCK’s more than 40 years of cryogenic ...
-
Manufactured by Young Engineering and Manufacturing, Inc.based in USA
Young Engineering is a leader in the surge control industry offering the largest size range of surge vessels designed to control hydraulic transients. Pressure surges or hydraulic transients, often occur with the opening and closing of valves or with the start up and shut down of pumps, which can result in damaged pipeline systems. ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork has the experience, know-how and product range to deliver virtually any actuation solution. Rotork products have long been chosen for their reliability and performance. Whilst these proven characteristics are certain under normal operating conditions, there are conditions that not even a standard Rotork actuator can operate in ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Quarter-turn cast iron gearbox suitable for use with fire protection (i.e. sprinkler) systems, includes limit switches to be incorporated into a supervisory electrical circuit. Designed and tested specifically to meet UL1091 specification and FM1112 ...
-
Manufactured by Tank Connectionbased in USA
Tank Connection designs, manufactures and installs the top rated bolted tank design available for fire protection applications, worldwide. Designed to meet Factory Mutual and NFPA 22 requirements, the Tank Connection performance package remains unmatched in the ...
-
Manufactured by OCV Control Valvesbased in USA
Our 74FC Deluge Control Valves are designed specifically to be used in deluge, pre-action, foam-water and other special systems. The 74FC Series is UL Listed for deluge service in globe pattern for sizes 3” through 10” (DN80 through DN250). The 74FC Series is a simple on-off valve that utilizes an innovative oval design to ...
-
Manufactured by OCV Control Valvesbased in USA
The Model 1330FC is a pressure relief valve that is installed downstream of a pressure reducing valve and is located in the distribution piping in a fire protection system. If the pressure in the distribution piping should become over pressurized, the 1330FC will open and relieve the excess pressure, preventing ...
-
Manufactured by EvapTech, Inc.based in USA
EvapTech Series EC cooling towers are induced draft, counterflow towers custom designed to meet your requirements for cost, footprint, power consumption and pumphead. Browse the sections to the right for more information on the important details of a Series EC cooling ...
-
Manufactured by EvapTech, Inc.based in USA
An EvapTech EX Cooling Tower is an induced draft, crossflow tower custom designed to meet our customers' requirements for cost, footprint, power consumption and pumphead. Browse the sections to the right for more information on the important details of an EvapTech Series EX Cooling Tower. For even more person service, especially about how we can meet your specific cooling tower requirements, ...
-
Manufactured by EvapTech, Inc.based in USA
The FM Approved Series ES and ESPevolved from the proven EvapTech Series EC product line. These products share high quality fire-retardant fiberglass pultrusions with proven structural integrity and a design methodology confirmed by FM Approvals Standard Class 4930 for resistance to the most extreme natural ...
-
Manufactured by Evapco Inc.based in USA
The FM Approved Series ES and ESP evolved from the proven EvapTech Series EC product line. These products share high quality fire-retardant fiberglass pultrusions with proven structural integrity and a design methodology confirmed by FM Approvals Standard Class 4930 for resistance to the most extreme natural hazards. EvapTech is a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you