Teledyne Fixed Gas Equipment
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The sensor electronics are completely protected and immune to water ingress and corrosion. The sensor elements are all plug-in components and can easily be replaced in the field. Operator interface is non-intrusive via a small handheld magnet. Configuration and routine calibration is intuitive and menu driven with fully scripted instructions. Sensor status is displayed on a built-in alphanumeric ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol. The CTX 300 transmits data in ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The stainless steel detector provides protection and resistance to corrosive agents. Classified IP 66, they are resistant to dust and water ingress. The precalibrated sensors of the OLCT 20 can be disconnected by turning the head of the unit. These “smart” sensors can be calibrated on a work bench, outside hazardous ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLC 10 and OLCT 10 are designed to detect combustible or toxic gases for tertiary applications (boiler plants, battery charging rooms, car parks, hospitals). Two OLC 10's can be connected to one detection channel to monitor the same area, without an additional junction box or extra wiring. Similarly, up to five OLCT 10's can be connected to one channel for the detection of CO, NO or NO2 in a ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The 7200 Plus and 7400 Plus Controllers are designed to provide simultaneous display and alarm functions for up to four monitored variables. A graphic LCD displays monitored data as bar graphs and engineering units. Three adjustable alarm levels are provided per channel. Relay outputs allow control of beacons, horns and other alarm events. The controllers are easy to configure and user friendly. ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Digital combustible detector for oxygen, toxic gases or combustible. The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Intended for use in combination with the MX 16, MX 32 and MX 43 controller, the OLCT 10N provides a fast and accurate response. All transmitter information is ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The DG7 Series is a group of intelligent gas detectors employs a wide choice of sensor types. The DGI -TT7-E is used for Toxic gases or Oxygen monitoring. The DG-TT7-S is a solid-state metal oxide semiconductor. The DG-TX7 employs a pair of OXYCOL catalytic sensors. All DGi-TT7 are constructed from a common housing and ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLCT 60 is a generation of high quality gas detectors which covers all industrial needs for a variety of applications. The OLCT 60 Series is composed of several versions: XP or IS sensor (toxic or oxygen versions). Remote or on-board sensor. The OLCT 60AD version allows the sensor to be installed remotely up to 15 meters (standard), ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Detcon Model 1000-CO2 and Model 1000-H2S Analyzers are designed to provide continuous, accurate, real-time measurement of gas concentrations in a wide variety of process gas streams. The instrument package is rated for Non-Hazardous areas. Consult commercial brochures for measurement ranges and more product ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head. The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Designed for the detection of explosive gases, toxic gases or oxygen, this gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application Teledyne Gas and Flame Detection offers a solution: catalytic, electrochemical, semiconductor, or poison control version. ATEX approved, these ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
the effects of corrosion in harsh industrial environments. Signal conditioning electronics are completely encapsulated in the sensor housing adding a high level of durability to the design. The packaging is XP-intrinsically safe. This innovative design marks a return to a simple, more affordable, and durable gas detection sensor without compromising ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you