Fixed Gas Equipment Near Belgium
-
Manufactured by Sensit Technologiesbased in USA
GAS•TRAC FPL is a fixed-point methane gas detector that uses laser technology to monitor fugitive methane gas emissions. FPL offers a 130 foot detection range, real-time analytics and remote data stream ideal for natural gas well heads, storage fields and compressor ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Tekran and VE Technology have partnered together to improve the quality of Natural Gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran 2642 Natural Gas Sampler paired with a Tekran 2600-NG ...
-
Manufactured by Bacharach, Inc.based in USA
The MGS-150 Gas Detector can meet almost any gas detection need with multiple sensor options for real-time monitoring of refrigerants, oxygen, combustible and toxic gases. It includes user-selectable current or volt analog outputs, allowing connectivity to most BMS, SCADA or central control systems. Status LEDs and a buzzer are ...
-
Manufactured by Bacharach, Inc.based in USA
The MVR-300 detector is specifically designed to provide continuous monitoring for refrigerants associated with high-efficiency, high volume refrigerant cooling and heating systems, such as VRF/VRV (Variable Refrigerant Flow/Variable Refrigerant Volume) sytems. Typical applications include hotels, dormitories, hospitals, office buildings, and apartment ...
-
Manufactured by Bacharach, Inc.based in USA
annual gas calibrations. Infrared sensing technology makes the MGS-250 immune to cross sensitivities to combustible and toxic gas as well as changes in temperature and humidity. Unlike other monitors, its simple-to-use interface gives the user the ability to set all parameters and outputs without opening the unit, moving jumpers, using ...
-
Manufactured by Bacharach, Inc.based in USA
Bacharach’s advanced MGS-550 gas detector can utilize any combination of sensor technologies, including electrochemical, semiconductor (MOS), catalytic bead or infrared, in a single platform for unparalleled detection capability. The MGS-550 can easily be connected to any central control system using the current and volt analog ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Digital combustible detector for oxygen, toxic gases or combustible. The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Intended for use in combination with the MX 16, MX 32 and MX 43 controller, the OLCT 10N provides a fast and accurate response. All transmitter information is ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
across all configuration, Freedom 5000 helps users streamline the transmitter’s operation and maintenance requirements for its points of toxic gas ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head. The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD10P Series has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations. These GD10P infrared gas detectors differ from all other models, because they utilize silicon based solid-state ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. There is no requirement for distinct personality boards in the gas detector or different detector ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Detcon Model 1000-CO2 and Model 1000-H2S Analyzers are designed to provide continuous, accurate, real-time measurement of gas concentrations in a wide variety of process gas streams. The instrument package is rated for Non-Hazardous areas. Consult commercial brochures for measurement ranges and more product ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The stainless steel detector provides protection and resistance to corrosive agents. Classified IP 66, they are resistant to dust and water ingress. The precalibrated sensors of the OLCT 20 can be disconnected by turning the head of the unit. These “smart” sensors can be calibrated on a work bench, outside hazardous ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The 7200 Plus and 7400 Plus Controllers are designed to provide simultaneous display and alarm functions for up to four monitored variables. A graphic LCD displays monitored data as bar graphs and engineering units. Three adjustable alarm levels are provided per channel. Relay outputs allow control of beacons, horns and other alarm events. The controllers are easy to configure and user friendly. ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The sensor electronics are completely protected and immune to water ingress and corrosion. The sensor elements are all plug-in components and can easily be replaced in the field. Operator interface is non-intrusive via a small handheld magnet. Configuration and routine calibration is intuitive and menu driven with fully scripted instructions. Sensor status is displayed on a built-in alphanumeric ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLC 10 and OLCT 10 are designed to detect combustible or toxic gases for tertiary applications (boiler plants, battery charging rooms, car parks, hospitals). Two OLC 10's can be connected to one detection channel to monitor the same area, without an additional junction box or extra wiring. Similarly, up to five OLCT 10's can be connected to one channel for the detection of CO, NO or NO2 in a ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The DG7 Series is a group of intelligent gas detectors employs a wide choice of sensor types. The DGI -TT7-E is used for Toxic gases or Oxygen monitoring. The DG-TT7-S is a solid-state metal oxide semiconductor. The DG-TX7 employs a pair of OXYCOL catalytic sensors. All DGi-TT7 are constructed from a common housing and ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
MicroSafe 500 and 600 Series gas detectors feature a non-intrusive operator interface. Calibration and programming instructions appear in simple intuitive and sequential script on a 16-character backlit display. The transmitter design incorporates extensive fault diagnostics with each condition conveniently identified on the transmitter ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLCT 60 is a generation of high quality gas detectors which covers all industrial needs for a variety of applications. The OLCT 60 Series is composed of several versions: XP or IS sensor (toxic or oxygen versions). Remote or on-board sensor. The OLCT 60AD version allows the sensor to be installed remotely up to 15 meters (standard), ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you